Rare-earth free sensitizer in NaLuCrF4:Er upconversion material

Upconversion phosphors are known as a material system that can convert near-infrared light into visible/ultraviolet emissions by sequentially absorbing multiple photons. The studies on upconversion materials often use two rare earth (RE) ions as a sensitizer-activator pair. We investigated the influences on luminescence intensity depending on Cr-doping content (x) of hexagonal NaLu_0.98–xCr_xF₄Er_0.02 (x = 0–0.9) upconversion material by substituting Lu³⁺ ions with Cr³⁺in the absence of Gd³⁺. The change in upconversion luminescence intensity appears with saddle-like shape. We suggest that Cr³⁺ ions play the dual role as a constituent in host lattice and a sensitizer in the upconversion process. Optimal conditions for gaining the strongest upconversion emission correspond to x = 0.3–0.5, where there are effective energy transfers between Cr³⁺ and Er³⁺ ions and CrEr dimers. Apart from these values, the emission intensity decreases rapidly which can be ascribed to the absence of multiple-photon absorption for the case of low Cr³⁺ contents, and to the coupling between Cr³⁺ and/or Er³⁺ ions for the case of high Cr³⁺ contents. Magnetization and electron-spin-resonant measurements were performed to understand the correlation between the optical and magnetic properties.     

Modelization of the whispering gallery mode in microgear resonators using the Floquet-Bloch formalism

In this paper, a two-dimensional (2-D) method describing the whispering gallery mode in a microgear resonator is presented. The microgear is a microdisk surrounded by a circular grating. The method, which is based on the Floquet-Bloch formalism, analytically describes the field within the disk and outside the grating. On the other hand, the field within the grating is calculated using a finite-difference scheme in polar coordinates. Matching the boundary conditions, it is possible to work in a forced oscillation regime or in a free oscillation regime (laser mode). The resonant wavelength and quality factor can then be deduced. Compared to the coupled mode theory and to 2-D finite-difference time-domain computations, the method is faster and more accurate. Moreover, a polarization effect of the microgear is demonstrated. The TE polarization experiences a Q-factor improvement contrary to TM polarization. Finally, microgear structures prove to be more efficient than micro flowers.     

Scheduling Optimization Modelling: A Case Study of a Woven Label Manufacturing Company

Production scheduling involves all activities of building production schedules, including coordinating and assigning activities to each person, group of people, or machine and arranging work orders in each workplace. Production scheduling must solve all problems such as minimizing customer wait time, storage costs, and production time; and effectively using the enterprise’s human resources. This paper studies the application of flexible job shop modelling on scheduling a woven labelling process. The labelling process includes several steps which are handled in different work-stations. Each workstation is also comprised of several identical parallel machines. In this study, job splitting is allowed so that the power of work stations can be utilized better. The final objective is to minimize the total completion time of all jobs. The results show a significant improvement since the new planning may save more than 60% of lead time compared to the current schedule. The contribution of this research is to propose a flexible job shop model for scheduling a woven labelling process. The proposed approach can also be applied to support complex production scheduling processes under fuzzy environments in different industries. A practical case study demonstrates the effectiveness of the proposed model.     

The role of electrostatic interactions in the mechanism of peptide bond hydrolysis by a Ser-Lys catalytic dyad

General-base catalysis in the active site of serine proteasesis carried out by the imidazole side chain of a histidine. Duringformation of the transition state, an adjacent carboxylic acidgroup stabilizes the positive charge that forms on the general-basecatalyst and as a result contributes several orders of magnitudeto the catalytic efficiency of these enzymes. In the recentlydiscovered family of self-cleaving proteins exemplified by theLexA repressor of Escherichia coli, instead of the imidazoleof a histidine, the active-site general-base catalyst was foundto be the -amino of a lysine. The considerably higher capacityof the lysine side chain for proton acceptance raises interestingquestions concerning the role of electrostatic interactionsin the mechanism of proton transfer by this highly basic group.The negative charge elimination studies described here and theireffects on the k_max and pK of LexA self-cleavage are consistentwith a model in which electrostatic interactions between anacidic side chain and the general-base catalyst form a barrierto proton transfer. The implications are that the -amino group,unlike the imidazole group, is capable of effecting proton transferwithout the intervention of a countercharge.     

Near infrared light-induced disassembly of polymeric micelles based on methylene blue conjugated polyethylene glycol

Light-sensitive drug delivery systems are considered ideal for applications in the biomedical fields for their ability to release the payload in an on-demand spatiotemporal controlled manner through the manipulation of the light source. Among the broad radiation spectrum, near infrared (NIR) light is considered advantageous compared to UV and visible light, due to its inherently lower photodamage to normal tissues and deeper penetration to lesion areas. In this study, we report a successful synthesis of a polymer capable of undergoing partial degradation upon irradiation with NIR light by conjugating 10-N-carbamoyl linkage methylene blue (MB) moiety, a NIR photocleavable ligand, with polyethylene glycol (PEG). Through effective coupling of MB, a hydrophobic moiety, to the hydrophilic PEG molecule, an amphiphilic polymer was synthesized, as demonstrated by a lowered surface tension (55 mN/m at 0.1% wt/vol). Subsequently, photo-induced reversal of surface activity associated with self-assembled structure disruption, was displayed by surface tension measurements, size distribution analysis, and burst release profile of paclitaxel (PTX) from polymeric micelles upon the exposure to NIR irradiation.     

Micro cam system driven by electrostatic comb-drive actuators based on SOI-MEMS technology

Microsystem Technologies - This paper reports a design and fabrication process of a micro cam system (MCS) with a flat-faced translating follower. The cam rim with cover diameter of 2.4 mm...     

Stochastic Programming For Order Allocation And Production Planning

Stochastic demand is an important factor that heavily affects production planning. It influences activities such as purchasing, manufacturing, and selling, and quick adaption is required. In production planning, for reasons such as reducing costs and obtaining supplier discounts, many decisions must be made in the initial stage when demand has not been realized. The effects of non-optimal decisions will propagate to later stages, which can lead to losses due to overstocks or out-of-stocks. To find the optimal solutions for the initial and later stage regarding demand realization, this study proposes a stochastic two-stage linear programming model for a multi-supplier, multi-material, and multi-product purchasing and production planning process. The objective function is the expected total cost after two stages, and the results include detailed plans for purchasing and production in each demand scenario. Small-scale problems are solved through a deterministic equivalent transformation technique. To solve the problems in the large scale, an algorithm combining metaheuristic and sample average approximation is suggested. This algorithm can be implemented in parallel to utilize the power of the solver. The algorithm based on the observation that if the remaining quantity of materials and number of units of products at the end of the initial stage are given, then the problems of the first and second stages can be decomposed.     

Optimization of sodium sulfide treatment of rice straw to increase the enzymatic hydrolysis in bioethanol production

The efficiency of sodium sulfide-assisted alkaline pulping for cellulose preparation from Oryza sativa L. rice straw in Vietnam for enzymatic saccharification was investigated. The response surface methodology was used for the determination of optimal technological parameters of alkaline pulping such as active alkali dosage, temperature and time. The optimal technological parameters were established to be active alkali dosage of 7%, treatment temperature of 100 °C and treatment time of 120 min. At these regimes, a maximal sugar yield of 51.8% (over dry rice straw) was obtained. It meant that the saccharification efficiency up to 97.1% could be achieved by using sodium sulfide-assisted alkaline pretreatment method. Addition of sodium sulfide into alkaline pretreatment resulted in higher sugar yield, higher level of depolymerization of lignin and less loss of cellulose. Moreover, liquid hydrolyzate after enzymatic hydrolysis was analyzed by HPLC to determine the compositions of sugar mixture. The fiber morphology in pretreated biomass solid was also revealed by SEM.     

Monitoring the Ratio of Two Normal Variables Using EWMA Type Control Charts

In many fields, there is the need to monitor quality characteristics defined as the ratio of two random variables. The design and implementation of control charts directly monitoring the ratio stability is required for the continuous surveillance of these quality characteristics. In this paper, we propose two one‐sided exponentially weighted moving average (EWMA) charts with subgroups having sample size n > 1 to monitor the ratio of two normal random variables. The optimal EWMA smoothing constants, control limits, and ARLs have been computed for different values of the in‐control ratio and correlation between the variables and are shown in several figures and tables to discuss the statistical performance of the proposed one‐sided EWMA charts. Both deterministic and random shift sizes have been considered to test the two one‐sided EWMA charts' sensitivity. The obtained results show that the proposed one‐sided EWMA control charts are more sensitive to process shifts than other charts already proposed in the literature. The practical application of the proposed control schemes is discussed with an illustrative example. Copyright © 2015 John Wiley & Sons, Ltd.