A classification control strategy for energy storage system in microgrid

Storage devices are indispensable elements in a microgrid to compensate for the power imbalance between loads and the distributed generator (DG) output. Different storage strategies give diverse performances in adjustment speed and capacity. Based on the performance of different storage devices and the features of power imbalance curve in different periods, a classification control strategy is proposed in this paper. First, storage devices are given priorities according to the adjusting speed, and the power imbalance curve is divided into two periods according to the changing speed. During an emergency, all the storages are employed to compensate the rapidly increasing power imbalance; during the steady period, storage device with higher priority is employed to track the instantaneous component of power imbalance, while storage device with lower priority is used to replace the kWh output of higher priority storage. The proposed strategy is tested in a microgrid within the subdistribution network of IEEE RBTS Bus6 system using Monte Carlo methods. Simulation results indicate that the classification control strategy could endow the system with fast adjusting ability through coordination between storages. Reliability indices of the testing system are utilized to demonstrate that the classification control strategy could improve the stability of the microgrid and reliability of the distribution network. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

The Complete Loss of p53 Expression Uniquely Predicts Worse Prognosis in Colorectal Cancer

p53 immunohistochemistry is considered an accurate surrogate marker reflecting the underlying TP53 mutation status and has utility in tumor diagnostics. In the present study, 269 primary CRCs were immunohistochemically evaluated for p53 expression to assess its utility in diagnostic pathology and prognostication. p53 expression was wild-type in 59 cases (23%), overexpressed in 143 cases (55%), completely lost in 50 cases (19%), and cytoplasmic in 10 cases (4%). p53 immunoreactivity was associated with tumor size (p = 0.0056), mucus production (p = 0.0015), and mismatch repair (MMR) system status (p < 0.0001). Furthermore, among CRCs with wild-type p53 expression, a significantly higher number of cases had decreased CDX2 than those with p53 overexpression (p = 0.012) or complete p53 loss (p = 0.043). In contrast, among CRCs with p53 overexpression, there were significantly fewer ALCAM-positive cases than p53 wild-type cases (p = 0.0045). However, no significant association was detected between p53 immunoreactivity and the “stem-like” immunophenotype defined by CDX2 downregulation and ALCAM-positivity. Multivariate Cox hazards regression analysis identified tubular-forming histology (hazard ratio [HR] = 0.17, p < 0.0001), younger age (HR = 0.52, p = 0.021), and female sex (HR = 0.55, p = 0.046) as potential favorable factors. The analysis also revealed complete p53 loss (HR = 2.16, p = 0.0087), incomplete resection (HR = 2.65, p = 0.0068), and peritoneal metastasis (HR = 5.32, p < 0.0001) as potential independent risk factors for patients with CRC. The sub-cohort survival analyses classified according to chemotherapy after surgery revealed that CRC patients with wild-type p53 expression tended to have better survival than those with overexpression or complete loss after chemotherapy. Thus, immunohistochemistry for p53 could be used for the prognostication and chemotherapy target selection of patients with CRC.     

Analog Circuit Design Methodology in a Low Power RISC Microprocessor

There are various kinds of analog CMOS circuits in microprocessors. IOs, clock distribution circuits including PLL, memories are the main analog circuits. The circuit techniques to achieve low power dissipation combined with high performance in newest prototype chip in the Super H RISC engines are described. A TLB delay can be decreased by using a CAM with a differential amplifier to generate the match signal. The accelerator circuit also helps to speed up the TLB circuit, enabling single-cycle operation. A fabricated 96-mm² test chip with the super H architecture using 0.35-m four metal CMOS technology is capable of 167-MHz operation at 300 Dhrystone MIPS with 2.0-W power dissipation.     

Seismic tests of a pile-supported structure in liquefiable sand using large-scale blast excitation

Extensive, large-amplitude vibration tests of a pile-supported structure in a liquefiable sand deposit have been performed at a large-scale mining site. Ground motions from large-scale blasting operations were used as excitation forces for vibration tests. A simple pile-supported structure was constructed in an excavated 3 m-deep pit. The test pit was backfilled with 100% water-saturated clean uniform sand. Accelerations were measured on the pile-supported structure, in the sand in the test pit, and in the adjacent free field. Excess pore water pressures in the test pit and strains of one pile were also measured.Vibration tests were performed with six different levels of input motions. The maximum horizontal acceleration recorded at the adjacent ground surface varied from 20 Gals to 1353 Gals. These alternations of acceleration provided different degrees of liquefaction in the test pit. Sand boiling phenomena were observed in the test pit with larger input motions. This paper outlines vibration tests and investigates the test results.     

Nanotrap and mass analysis of aromatic molecules by phenyl group-modified nanoparticle

To functionalize the surface of nanoparticles with phenyl groups for subsequent cross-linking with aromatic molecules by mutual interactions, we prepared functional nanoparticles (d = 3 nm) by silanization with phenyl-triethoxysilane. The nanoparticles had Fe(2)O(3) cores conjugated to phenyl groups; this was confirmed by Fourier transform infrared (FT-IR) spectroscopy and absorption spectrophotometry. The typical C-H and C-C peaks and the absorption at 240 nm, which corresponds to aromatic rings, were detected in the spectroscopic results for the phenyl group-modified nanoparticles. The nanoparticles could ionize aromatic (colchicine, reserpine, and bradykinin peptide) and nonaromatic (L-α-phosphatidylethanolamine,dioleoyl, and polyethylene glycol) molecules by nanoparticle-assisted laser desorption/ionization mass spectrometry. The nanoparticles worked as a selective trap and an ionization-assisting reagent in mass spectrometry for the aromatic molecular targets.     

Operation control of internally conductor cooled cable system

The development of 275 kV internally-conductor-cooled cable systems is under way for application to long-distance large-capacity (1500 MVA/cct) underground transmission systems. From the viewpoint of the reliability and the energy economy of these systems, the operational control system for the cooling facilities is especially important, because the facilities require large cooling capacity due to the large heat loss of the cable conductor. The cooling device characteristics are described, and the effects of operation control on energy savings are examined. A long-term field test has shown that the computer-controlled operation system is very useful. Simulation results for the operational control system confirm that calculated values are in good agreement with measurement results     

Application of unified voltage analysis for high‐ and low‐voltage distribution systems by power flow calculation using indication method between nodes

It has been noted that the voltage of connection points rises according to the reverse power flow when grid‐connected photovoltaic systems are concentrated in distribution systems in residential areas. When this happens, the photovoltaic system may control the power generation output to maintain a suitable voltage for the connection point. Designing a demand area power system aiming at free access to a distributed power supply for energy‐effective practical use requires a precise understanding of this problem. When analyzing photovoltaic systems mainly connected to low‐voltage systems, we looked for a method of analysis in which the high‐voltage systems and the low‐voltage single‐phase three‐wire systems are unified. This report concerns use of the indication method between nodes using power flow calculation, for the purpose of developing a technique of analyzing unified high‐voltage systems and low‐voltage single‐phase three‐wire systems. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 147(3): 49–62, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10255     

Development of water pipe cooling system for power cables intunnels

A full-size test line was constructed to study the water pipe cooling system for a bulk-power transmission line installed in a tunnel. Based on the test data and their analysis, a technique for designing the system has been established. The results have indicated an effective layout of the cooling pipes in the tunnel, and have validated the accuracy of the computer models to determine thermal characteristics of the tunnel system. An efficient control method to operate the cooling system according to the load changes of the cables was developed. The chosen layout is shown to be more effective than the dispersed layout because it accelerates the air convection and makes the air temperature more uniform. Furthermore, the thermal convection resistance between the tunnel wall and the air is reduced. It was also verified that the air temperature distribution along the vertical shaft could be predicted by thermal convection analysis. This cooling system is scheduled to be applied to a 154 kV power cable line in 1990     

Development of automatic fault point locating and sectional isolating system for power distribution line

This paper describes the development of the Automatic Fault Point Locating and Sectional Isolating System. This system locates a single-line-to-ground fault point at each pole by using ground-current sensors, and isolates the faulted section by controlling pole switches with no outage of unfaulted sections. The ground-current sensor is connected to the line between allied ground terminals of pole devices and grounded conductor. It detects a ground fault current of more than 0.64 amperes that is determined so as to avoid an unexpected operation by stray current, but to detect the fault current accurately, and sends out an emergency signal with time delay of 0.1 s. Sectional isolation starts when both the emergency signal from the sensor and relay operation signals from a substation are received and ends within a feeder circuit-breaker tripping time of 1.5 s.