Thin films of tin sulphide for use in thin film solar cell devices

SnS is of interest for use as an absorber layer and the wider energy bandgap phases e.g. SnS₂, Sn₂S₃ and Sn/S/O alloys of interest as Cd-free buffer layers for use in thin film solar cells. In this work thin films of tin sulphide have been thermally evaporated onto soda-lime glass substrates with the aim of optimising the properties of the material for use in superstrate configuration device structures. The thin films were characterised using energy dispersive X-ray analysis (EDS) to determine the film composition, X-ray diffraction (XRD) to determine the phases present and structure of each phase, transmittance versus wavelength measurements to determine the energy bandgap and scanning electron microscopy (SEM) to observe the surface topology and topography. These properties were then correlated to the deposition parameters. Using the optimised conditions it is possible to produce thin films of tin sulphide that are pinhole free and conformal to the substrate that are suitable for use in thin film solar cell structures.     

Thermally evaporated thin films of SnS for application in solar cell devices

SnS (tin sulphide) is of interest for use as an absorber layer and the wider energy bandgap phases e.g. SnS₂, Sn₂S₃ and Sn/S/O alloys of interest as Cd-free buffer layers for use in thin film solar cells. In this work thin films of tin sulphide have been thermally evaporated onto glass and SnO₂:coated glass substrates with the aim of optimising the properties of the material for use in photovoltaic solar cell device structures. In particular the effects of source temperature, substrate temperature, deposition rate and film thickness on the chemical and physical properties of the layers were investigated. Energy dispersive X-ray analysis was used to determine the film composition, X-ray diffraction to determine the phases present and structure of each phase, transmittance and reflectance versus wavelength measurements to determine the energy bandgap and scanning electron microscopy to observe the surface topology and topography and the properties correlated to the deposition parameters. Using the optimised conditions it is possible to produce thin films of tin sulphide that are pinhole free, conformal to the substrate and that consist of densely packed columnar grains. The composition, phases present and the optical properties of the layers deposited were found to be highly sensitive to the deposition conditions. Energy bandgaps in the range 1.55 eV-1.7 eV were obtained for a film thickness of 0.8 μm, and increasing the film thickness to > 1 μm resulted in a reduction of the energy bandgap to less than 1.55 eV. The applicability of using these films in photovoltaic solar cell device structures is also discussed.     

Annealing studies and electrical properties of SnS-based solar cells

Thin films of SnS (tin sulphide) were thermally evaporated onto glass and CdS/ITO (cadmium sulphide/indium tin oxide) coated glass substrates and then annealed in vacuum with the aim of optimising them for use in photovoltaic solar cell device structures. The chemical and physical properties of the layers were determined using scanning electron microscopy, energy dispersive x-ray analysis, x-ray diffraction, and transmittance versus wavelength measurements. “Superstrate configuration” devices were also made using indium tin oxide as the transparent conductive oxide, thermally evaporated cadmium sulphide as the buffer layer and evaporated copper/indium as the back contact material. Capacitance-voltage data are given for the fabricated devices. Capacitance-voltage, spectral response and I-V data are given for the fabricated devices.     

Electrophysiological and behavioral responses of female African rice gall midge, <Emphasis Type="Italic">Orseolia oryzivora</Emphasis> Harris and Gagné, to host plant volatiles

African rice gall midge, Orseolia oryzivora Harris and Gagné, is a major pest of rice in Africa. Depsite its economic importance, its chemical ecology is not well understood. Here, we assessed behavioral and electrophysiological responses of O. oryzivora to host plant volatiles. In olfactometer bioassays, mated female O. oryzivora were attracted to volatiles emitted from intact rice plants but were repelled by volatiles collected from plants infested by conspecifics. In a choice test, there was a preference for volatiles from uninfested plants over those from infested plants. Coupled gas chromatography-electroantennography analyses of panicle volatiles isolated four electrophysiologically active components: (S)-linalool, 4,8-dimethyl-1,3,7-nonatriene, (E)-caryophyllene, and (R/S)-(E)-nerolidol. A synthetic blend of volatiles at the same concentration and ratio as that from an intact plant was attractive to mated females, whereas a blend based on the ratio of volatiles from an infested plant was repellent. This suggests that O. oryzivora uses olfaction for host plant recognition. The identification of blends of volatiles emitted by plants that can both attract and repel O. oryzivora may aid the development of sustainable control measures.