Detection of Multiple Blockages in Parallelized Microreactors

In a plant consisting of parallelized microreactors (MRs), the product quality is lowered because of a lack of flow uniformity among them when blockage occurs. It is not practical to install sensors in every MR from the viewpoint of cost when detecting the blocked MRs. In the previous study, the multiple blockage detection (MBD) method using a small number of sensors was proposed, but its performance became low when the number of sensors decreased. Here, the conventional algorithm for MBD is improved by considering the process behavior on blockage occurrence, and the effectiveness of the improved algorithm is demonstrated through a numerical case study. The effects of flow distributor types and sensor types on the MBD performance are numerically investigated.     

Phase fluctuations of cross-polarized signals at 4 GHz in fine weather on earth-space paths

On an earthspace propagation path with the low elevation angle of 10 deg, the phase between co- and crosspolar signals occasionally showed rapid and irregular fluctuations during fine weather. These fluctuations were generally significant during the daytime, and were strongly in phase with the occurrence of the copolar amplitude scintillations. This could be attributed to the combined effects of the crosspolar phase pattern of the receiving antenna and small fluctuations of the angle of arrival of the radiowaves.     

Transmission study of germanium using free-electron laser

We have measured optical transmittance through germanium in the mid-infrared region at room temperature using the Osaka free-electron laser (FEL). In spite of the fact that germanium is transparent in the mid-infrared region, we observed strong suppression of optical transmission under high-intensity FEL excitation. We found that the observed suppression is due to optical absorption in germanium. To analyze the experimental results, we have calculated optical transmittance of germanium within Keldysh theory     

Formation and Characterization of Ce3ZrO8 Prepared by the Hydrazine Method

A compound denoted as (Ce_0.75Zr_0.25)O₂ (Ce, ZrO₈) is formed near room temperature from cerium and zirconium nitrates using hydrazine monohydrate. It has a cubic unit cell with a = 0.5342 nm. Characterization of powders heated to various temperatures at 10°C/min demonstrates that the specific surface area does not decrease below 20 mVg until >1000°C.     

Monte Carlo simulation of hydrogen absorption in palladium and palladium–silver alloys

A modified Monte Carlo (MC) simulation was performed to investigate the hydrogen absorption behavior in Pd and Pd–Ag alloys of the composition Pd_xAg_1−x (x=0.7–0.8) under H₂ pressure (0.1 MPa) at different temperatures. The present method employed can consider the dissociative adsorption of hydrogen molecule and the subsequent absorption of hydrogen atom by formalizing the relationship between the pressure of hydrogen molecule and hydrogen atom. The potential parameters were determined to reproduce the solution enthalpy of hydrogen in pure metals. The results are in good agreement with experimental findings as well as previous theoretical studies. We confirmed that our method is useful to simulate the absorption of hydrogen in metals and alloys.     

Pressure anomaly in the paramagnetic region of bcc solid3He

The isochoric pressure of bcc Solid³He in the vicinity of the triple point has been measured by changing the temperature stepwisely and waiting for thermal equilibrium. We observed anomalous pressure kinks of the temperature dependence in the paramagnetic region near the triple point. This anomaly appeared at 0.37 to 0.40 tesla, and disappeared below 0.36 tesla. Moreover, critical phenomena at the transition point from the paramagnetic phase (PP) to the high field phase was observed and the phase line curves toward the PP side.     

Properties of thin TiN films deposited onto stainless steel by an in-line dry coating process

A new coil-coating pilot plant, capable of utilizing ion plating, sputtering and plasma-assisted chemical vapor deposition (PACVD) processes, independently or in series, was developed and optimum conditions for TiN, TiC, Al_xO_y, SiO_x and Cr coating were established. This paper is mostly concerned with the results of characterization (conducted in parallel by the authors′ two institutions) of TiN films deposited by ion plating or sputtering onto type-304 stainless steel strips. In particular, the dependence of the basic properties such as chemical composition, structure, adhesion, and color on the coating process are discussed with respect to anti-corrosion, anti-wear, and decorative applications. TiN coatings with a very attractive gold coloration were obtained; they performed well in wear testing, but did not show satisfactory corrosion resistance. However, it was found that the latter can be improved significantly by depositing a SiO_x, top layer by PACVD above the TiN coating. Thus the in-line dry coating processes are capable of producing highly functional steel surfaces with decorative color and high corrosion resistance.     

Clonal change of HTLV-1 infected lymphocytes before onset of adult T-cell leukemia/lymphoma

A 73-year-old HTLV-1 infected male developed overt ATL following 3-years observation, and the clonality of HTLV-1 infected cells changed before overt ATL onset. 10 micrograms of DNA, extracted from mononuclear cells was digested with PstI, and the clonal proliferation of HTLV-1 infected cells was examined by Southern blotting with LTR probe. 4 bands were observed 3 years prior to ATL onset, and 2 different bands were detected 2 years and 6 months later. This suggests that in some ATL cases, the clonality of monoclonally proliferated HTLV-1 infected cells may be changeable before overt ATL onset.