Effective elastic properties and residual stresses in directionally solidified eutectic Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/YAG/ZrO<Subscript>2</Subscript> ceramics estimated by finite element analysis

Effective elastic properties and residual stresses were assessed in directionally solidified ternary eutectic ceramic, Al₂O₃/YAG/ZrO₂, by finite element analyses. A 3D finite element model was generated from a CT scan, representative of the microstructure and with a similar volume fraction. Effective elastic properties were calculated by numerical homogenisation. They highlight a quasi-isotropic behaviour of the ternary eutectic ceramics. Despite the difficulties to measure the strain, the dispersion observed in the results and the limited reliability of the materials properties, the results constitute a step towards a better understanding of the material behaviour. Thermal residual stresses induced by the manufacturing were also evaluated. Tensile residual stresses in yttria-stabilised zirconia and compressive residual stresses in YAG and alumina were highlighted. This evaluation also shed light on the influence of the phase morphology in the microstructure. Indeed, the computed spatial distribution of the residual stresses showed that they are different from one position to another due to the variation in phase morphology and also to material properties variability. Therefore, it is important when numerically assessing the thermomechanical properties to take into account the microstructure morphology as well as the variability of material properties.     

Langmuir flow effects in the laser gyro

Langmuir flow effects have been investigated in the laser gyro by measuring the integral of the beat frequency while tuning the frequency of oscillation. The results are in agreement with the traveling-wave Lamb model. The presence of the dc discharge tube walls gives rise to gas circulation in the laser gyro cavity. If the oppositely directed traveling waves see a net gas flow the gyro exhibits a null shift which depends on the magnitude and direction of the discharge current unbalance causing the net gas flow. The null shift is shown to be due to the mode pulling and pushing associated with the anomalous dispersion exhibited by the gain atoms.     

Characterization of pyrogenic black carbon by desorption atmospheric pressure photoionization Fourier transform ion cyclotron resonance mass spectrometry

We present a new method for molecular characterization of intact biochar directly, without sample preparation or pretreatment, on the basis of desorption atmospheric pressure photoionization (DAPPI) coupled to Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. Conventional ionization methods (e.g., electrospray or atmospheric pressure photoionization) for characterization of natural organic matter have limited utility for the characterization of chars due to incomplete solubility in common solvents. Therefore, direct ionization techniques that do not require sample dissolution prior to analysis are ideal. Here, we apply DAPPI FTICR mass spectrometry to enable the first molecular characterization of uncharred parent oak biomass and after combustion (250 °C) or pyrolysis (400 °C). Parent oak is primarily composed of cellulose-, lignin-, and resin-like compounds. Oak combusted at 250 °C contains condensed aromatic compounds with low H/C and O/C ratios while retaining compounds with high H/C and O/C ratios. The bimodal distribution of aromatic and aliphatic compounds observed in the combusted oak sample is attributed to incomplete thermal degradation of lignin and hemicellulose. Pyrolyzed oak constituents exhibit lower H/C and O/C ratios: approximately three-quarters of the identified species are aromatic. DAPPI FTICR MS results agree with bulk elemental composition as well as functional group distributions determined by elemental analysis and solid state (13)C NMR spectroscopy. Complete molecular characterization of biomass upon thermal transformation may provide insight into the biogeochemical cycles of biochar and future renewable energy sources, particularly for samples currently limited by solubility, separation, and sample preparation.     

Fast measurements of concentration profiles inside deformable objects in microflows with reduced spatial coherence digital holography

We investigate the use of a digital holographic microscope working with partially coherent spatial illumination to study concentration profiles inside confined deformable bodies flowing in microchannels. The studied phenomenon is rapidly changing in time and requires the recording of the complete holographic information for every frame. For this purpose, we implemented one of the classical methods of off-axis digital holography: the Fourier method. Digital holography allows one to numerically investigate a volume by refocusing the different planes of depth, allowing one to locate the objects under investigation in three dimensions. Furthermore, the phase is directly related to the refractive index, thus to the concentration inside the body. Based on simple symmetry assumptions, we present an original method for determining the concentration profiles inside deformable objects in microconfined flows. Details of the optical and numerical implementation, as well as exemplative experimental results are presented.     

Quantitation of induced mutation in Dictyostelium discoideum: characterization and use of a methanol-resistance mutation assay

An assay based on forward mutation of Dictyostelium discoideum to 3% methanol resistance allows quantitation of induced mutation following treatment with physical and chemical agents. Properties of this assay are: uniform recovery of methanol-resistant (MeOHr) cells over a wide range of plated cell densities, equal growth rates of methanol-sensitive and methanol-resistant cells in the absence of methanol during the expression period and the attainment of plateau in the number of mutants as a function of expression time. When 4 mutagens were tested with this system and compared at the 10% survival level, N-methyl-N'-nitrosoguanidine was the most effective for mutation induction, followed by 60Co-gamma-rays, ultraviolet light, and methyl methanesulfonate.     

Attitudes Toward Giving Smoking Cessation Advice Among Nursing Staff at a Long-Term Residential Care Facility.

The objective of this study was to provide a first assessment of (a) long-term care staffs' prevalence of and attitudes toward giving smoking cessation advice to residents and (b) predictors of advice giving. Results of a survey (N = 115) found that 54.8% of licensed nurses and 34.6% of nursing assistants reported ever advising. Advising was associated with job classification and believing that residents' problem lists should include smoking. Not advising was associated with believing advice is the physicians' responsibility. Staff somewhat endorsed risks of smoking and benefits of cessation for residents, smoking as a right and pleasure, and that some residents cannot make decisions about smoking. Staff moderately endorsed safety concerns: 36% wanted policy changes. Lack of institutional support and perceived residents' cessation disinterest were key barriers. The findings suggest that staff may be missing intervention opportunities and that institutional support of advising cessation may facilitate maintenance and improvement of nursing home residents' health. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Maintenance procedures and definition of limit states for exterior wood coatings

Maintenance procedures of different wood coating systems were studied in field exposure trials with coated balcony constructions. Maintenance coatings were applied on one half of each of the balcony parts after 18 months and assessed after 24 months of total exposure time. It was found that the opaque white coating systems were the most durable ones reaching long intervals of required maintenance. For systems with lower durability on the maintained surfaces further degradation of the coatings was prevented. Different characteristics were observed for film forming and non film forming semi-transparent varnishes. Definitions of a series of limit states for coating systems on wood were suggested including esthetical limits and three levels of durability limits. Film forming coatings can reach two durability limits, i.e. the maintenance interval and the renovation interval. For non film forming coatings there is only one limit state of coating durability where maintenance is needed. The third durability limit is related to the coated substrate, i.e. the wood component, by the onset of decay in wood.     

FUNCTION OF THE PULMONARY SURFACTANT IN THE CLEARANCE OF RESPIRATORY BRONCHIOLES: A MATHEMATICAL MODEL

An idea of clearance of respiratory bronchioles as a result of continuous flow of extracellular liquid layer generated by the gradient of the surface tension is presented. This gradient is due to nonhomogeneities in the distribution of the surface-active substances produced by type II pneumocytes in the alveoli. The mathematical model which describes the flow of the hypophase has been formulated and numerically examined for some values of viscosity and density of the lining layer and of differences in the surface concentration of surfactant between the bronchiole edges. The results show a strong dependence of the clearance rate on these differences and hypophase viscosity and very weak effect of the gravity forces.     

Penetration of Monodisperse,Singly Charged Nanoparticles through Polydisperse Fibrous Filters

The article presents experimental results and theoretical analysis of aerosol nanoparticle penetration through fibrous filters with a broad fiber diameter distribution. Four fibrous filters were produced using the melt-blown technique. The analysis of the filters’ SEM images indicated that they had log-normal fiber diameter distribution. Five kinds of proteins and two types of silica particles were generated by electrospraying and were then classified using a Parallel Differential Mobility Analyzer to obtain well-defined, monodisperse, singly charged challenge aerosols with diameters ranging from 6.3 to 27.2 nm. Particle penetration through the filters was determined using a water-based CPC. Experimental results were compared first with predictions derived from the classical theory of aerosol filtration. It is demonstrated that it is inappropriate to apply it to the arithmetic mean fiber diameter, as this results in turn in a huge underestimation of nanoparticle penetration. A better, but still unsatisfactory agreement is observed when that theory was used together with the pressure drop equivalent fiber diameter or when the Kirsch model of nonuniform fibrous media was applied. We show that the classical theory applied to any fixed fiber diameter predicts a stronger dependence of nanoparticle penetration on the Peclet number as compared to experimental data. All these observations were successfully explained by using our original partially segregated flow model that accounts for the filter fiber diameter distribution. It was found that the parameter of aerosol segregation intensity inside inhomogeneous filters increases with the increase in particle size, when the convective transport becomes more pronounced in comparison to the diffusive one.