Structural Aspects of P2-Type Na0.67Mn0.6Ni0.2Li0.2O2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium-Ion Batteries

A known strategy for improving the properties of layered oxide electrodes in sodium-ion batteries is the partial substitution of transition metals by Li. Herein, the role of Li as a defect and its impact on sodium storage in P2-Na_0.67Mn_0.6Ni_0.2Li_0.2O₂ is discussed. In tandem with electrochemical studies, the electronic and atomic structure are studied using solid-state NMR, operando XRD, and density functional theory (DFT). For the as-synthesized material, Li is located in comparable amounts within the sodium and the transition metal oxide (TMO) layers. Desodiation leads to a redistribution of Li ions within the crystal lattice. During charging, Li ions from the Na layer first migrate to the TMO layer before reversing their course at low Na contents. There is little change in the lattice parameters during charging/discharging, indicating stabilization of the P2 structure. This leads to a solid-solution type storage mechanism (sloping voltage profile) and hence excellent cycle life with a capacity of 110 mAh g^-1 after 100 cycles. In contrast, the Li-free compositions Na_0.67Mn_0.6Ni_0.4O₂ and Na_0.67Mn_0.8Ni_0.2O₂ show phase transitions and a stair-case voltage profile. The capacity is found to originate from mainly Ni³⁺/Ni⁴⁺ and O^2-/O^2-δ redox processes by DFT, although a small contribution from Mn⁴⁺/Mn⁵⁺ to the capacity cannot be excluded.     

Investigating the effect of silver nanorods embedded in polydimethylsiloxane matrix using nanoindentation and its use for flexible electronics

The stretchable electrodes with excellent flexibility, electrical conductivity, and mechanical durability are the most fundamental components in the emerging and exciting field of flexible electronics. This article proposes a method for fabrication of such a stretchable electrode by embedding silver nanorods (AgNRs) into a polydimethylsiloxane (PDMS) matrix that is grown by a unique glancing angle deposition technique. The surface, mechanical, and electrical properties of PDMS are significantly changed after embedding the AgNRs in it. The results show that surface roughness and polarity increase after AgNRs are embedded in the PDMS matrix. Elastic modulus (E) and hardness (H) decrease with an increase in the indentation load as a result of the indentation depth effect. Due to strong interfacial adhesion of AgNRs embedded in the PDMS matrix, the E and H of nanocomposite are increased by 167.6 and 93.3% compared with PDMS film, respectively. Furthermore, the AgNRs-PDMS film has an electrical resistivity value in the order of 10⁻⁷ Ωm. It remains conductive during various mechanical strains such as bending, twisting, and stretching, which is demonstrated using a light-emitting diode circuit. Simultaneously, the antimicrobial activity of silver could make it a promising candidate for wearable electronics.     

Escherichia coli,Salmonella spp., and Staphylococcus aureus susceptibility to antimicrobials of human and veterinary importance in poultry sector of India

In India, little attention has been paid on antimicrobial resistance (AMR) in the context of developing “One Health” approach. Hence, utilizing multi-disciplinary approach, we assess the AMR level and dynamics/pattern of multi-drug resistance (MDR) in Escherichia coli, Salmonella spp., and Staphylococcus aureus circulating over the different stages of poultry in India. A total of 342 isolates including E. coli (n = 143), Salmonella spp. (n = 104), and S. aureus (n = 95) were recovered from fecal (n = 80) and cecal (n = 80) samples of chicken, collected across the different poultry-retail shops and poultry-farms located at urban and rural areas of Rajasthan, India, respectively. High rates of AMR to drugs that are critically/highly important both in human and veterinary medicine were observed among all the isolates. Upward trends in AMR prevalence was observed in poultry-retail shops than in poultry-farms. Notably, >90% of all the isolates were MDR, of particular, pattern/prevalence of MDR was substantially varied across the poultry-farms vs. poultry-retail shops. Our results indicate AMR including MDR to be common in E. coli, Salmonella spp., and S. aureus distributed frequently in poultry. The study encourages the formulation of national policy, programmes and further research with a “One Health” approach that can benefits to the human/animal and the environment.     

Assessment of Mixture and Eulerian Multiphase Models in Predicting the Thermo-Fluidic Transport Characteristics for Fly Ash-Water Slurry Flow in Straight Horizontal Pipeline

The thermo-fluidic transport characteristics of the fly ash–water slurry flow in a straight horizontal pipe are predicted by deploying two different multiphase modeling strategies, viz. the mixture and the Eulerian multiphase models. Comparisons between the two model predictions in terms of the pressure drop and heat transfer coefficient are done along with the comparisons between the single (water) and the two phase system (slurry). Spherical fly ash particles, with diameter of 13 µm for an average inflow velocity ranging from 1 to 5 m/s and particle concentrations within 0–40% by volume for each velocity are considered as the dispersed phase carried by the carrier phase water. Significant differences between the two model predictions can be observed both from the qualitative and quantitative perspectives. This finally leads to the appropriate choice of the multiphase model for predicting the thermo-fluidic transport characteristics in slurry flow.     

Graft copolymerization onto rubber. VII. Graft copolymerization of methyl methacrylate onto rubber using potassium peroxydisulfate catalyzed by silver ion

The graft copolymerization of methyl methacrylate onto natural rubber (NR) was carried out varying the concentration of monomer, initiator, thiourea, and silver nitrate over a wide range. The grafting reaction was temperature-dependent. From the Arrhenius plot, the overall energy of activation was computed. A suitable reaction scheme and rate expression for the rate of polymerization was suggested.     

Weak coin flipping with small bias

This paper presents a quantum protocol that demonstrates that weak coin flipping with bias ≈0.239, less than 1/4, is possible. A bias of 1/4 was the smallest known, and followed from the strong coin flipping protocol of Ambainis in [33rd STOC, 2001] (also proposed by Spekkens and Rudolph [Phys. Rev. A 65 (2002) 012310]). Protocols with yet smaller bias ≈0.207 have independently been discovered by Ambainis (2001) and Spekkens and Rudolph [Phys. Rev. Lett. 89 (2002) 227901]. We also present an alternative strong coin flipping protocol with bias 1/4 with analysis simpler than that of Ambainis [33rd STOC, 2001].     

Influence of Hydroxypropyl Methylcellulose and of Manufacturing Technique on in Vitro Performance of Selected Antacids

Factors affecting the performance of antacids F-MA 11, dihydroxy aluminum aminoacetate, magaldrate and magnesium hydroxide were studied in vitro using Schaub's acid neutralization test, a modified Reheis reaction velocity test and the USP test. From the results obtained it was evident that type and combination of antacid, the adjuvants and formulation techniques used in preparation of antacids affect their performance. The USP preliminary antacid test and acid neutralization test are not optimal in vitro tests to evaluate in vitro onset and duration of action of antacids.