Direct finite element design optimisation of the cagelessreluctance synchronous machine

The finite element analysis method is used directly in optimisation algorithms to optimise in multidimensions the design of the cageless reluctance synchronous machine. Two optimisation methods are evaluated to minimise or maximise the function value. These are the direction set method of Powell and the quasi-Newton algorithm. Both methods proved to be successful, with some advantages and disadvantages. Using these methods at a power level below 10 kW, results are given of structures of the reluctance synchronous machine which have been optimised according to specific criteria. Calculated and measured results show that the maximum torque optimum designed reluctance synchronous machine has the advantages of high power density and high efficiency     

A transient induction motor model including saturation and deep bareffect

Transient cage induction motor models for use in inverter-fed drives and controllers are reviewed. A simple transient model is presented that includes rotor deep bar effect and magnetic saturation of the magnetising and rotor leakage flux paths. The improved model requires motor details in the form of simple impedance versus frequency characteristics which can be obtained from a variety of external sources. These can range typically from detailed steady-state finite-element solutions to simple experimental measurements. The model is verified experimentally using a 75 kW, 4 pole vector controlled AC motor drive     

Estimating room temperatures from fires along walls and in corners

Determination of temperatures associated with room fires provides a means of assessing an important aspect of fire hazard: the likelihood of the occurrence of flashover. Layer temperatures in excess of 600°C have been associated with the occurrence of flashover. A data correlation has previously been presented to estimate layer temperatures for fires burning in the center of rooms. For fires in corners and along walls, restricted entrainment results in higher layer temperatures than predicted by the previous correlation. Modification factors for the previous correlation are developed to extend its applicability to wall and corner burning geometries. The present analysis suggests that a fire in a corner may cause flashover with only half the heat release rate necessary for a fire burning in the center of a room. Reference: Frederick Mowrer and Robert Williamson, Estimating Room Temperatures from Fires along Walls and in Corners,Fire Technology, Vol. 23, May 1987, pp. 133–145.     

Mentor modeling: the internalization of modeled professional thinking in an epistemic game

Players of epistemic games – computer games that simulate professional practica – have been shown to develop epistemic frames: a profession's particular way of seeing and solving problems. This study examined the interactions between players and mentors in one epistemic game, Urban Science. Using a new method called epistemic network analysis, we explored how players develop epistemic frames through playing the game. Our results show that players imitate and internalize the professional way of thinking that the mentors model, suggesting that mentors can effectively model epistemic frames, and that epistemic network analysis is a useful way to chart the development of learning through mentoring relationships.     

Just how insoluble are monoterpenes?

Prior generalizations about the ecological roles of monoterpenes may be misleading if based on the presumed insolubility of monoterpenes in water. We determined the aqueous solubility of 31 biologically active monoterpenes by gas chromatography. While hydrocarbons were of low solubility (< 35 ppm), oxygenated monoterpenes exhibited solubilities one or two orders of magnitude higher, with ranges of 155–6990 ppm for ketones and of 183–1360 ppm for alcohols. Many monoterpenes are phytotoxic in concentrations under 100 ppm, well below the saturated aqueous concentrations of oxygenated monoterpenes. Therefore, even dilute, unsaturated solutions of monoterpenes, occurring naturally in plant tissues and soil solutions, may act as potent biological inhibitors.     

Estimation of the inter-bar resistance of a cast cage rotor

This paper describes an experimental investigation of bar-to-bar resistance. It addresses the interpretation of experimental data, and the use of that data to develop a means of estimating bar-to-bar resistance at the design stage.     

Multicast support for mobile hosts using Mobile IP: Design issues and proposed architecture

In this paper, we consider the problem of providing multicast to mobile hosts using Mobile IP for network routing support. Providing multicast in an internetwork with mobile hosts is made difficult because many multicast protocols are inefficient when faced with frequent membership or location changes. This basic difficulty can be handled in a number of ways, but three main problems emerge with most solutions. The tunnel convergence problem, the duplication problem, and the scoping problem are identified in this paper and a set of solutions are proposed. The paper describes an architecture to support IP multicast for mobile hosts using Mobile IP. The basic unicast routing capability of Mobile IP is used to serve as the foundation for the design of a multicast service facility for mobile hosts. We believe that our scheme is transparent to higher layers, simple, flexible, robust, scalable, and, to the extent possible, independent of the underlying multicast routing facility. For example, our scheme could interoperate with DVMRP, MOSPF, CBT, or PIM in the current Internet. Where differences exist between the current version of IP (IPv4) and the next generation protocol (IPv6), these differences and any further optimizations are discussed. This revised version was published online in June 2006 with corrections to the Cover Date.     

Airbridged high-speed AlGaAs-GaAs ridge waveguide lasers

The design of a high modulation response multiple-quantum-well ridge waveguide laser in AlGaAs-GaAs, with low parasitics is discussed. The device was fabricated on a semi-insulating substrate with a wide top contact, and airbridges have been used to connect the ridge top contact to the bonding pads on the semi-insulating substrate. The 3-dB frequency response of the laser has been measured to be 21 GHz, which is a record for unstrained quantum-well AlGaAs-GaAs lasers.     

Characterization of threshold for single tone maximum likelihoodfrequency estimation

This paper presents a simple and direct approach to understanding the threshold effect associated with maximum likelihood estimation of the frequency of a single complex tone. Motivation for the approach, stemming from known results in the field of phase locked loops, is given. It is shown both theoretically and experimentally that the onset of threshold can be directly characterized by a single, easily computed parameter, namely the Cramer-Rao bound on the phase estimation error variance