Quantum chemical studies of Li cation binding to polyalkyloxides

A quantum chemical study of the binding of Li⁺ cation to polyalkyloxides has been carried out. The lithium cation interaction with three polyalkyloxides (polyethylene oxide (PEO), polytrimethylene oxide (PTMO), and polypropylene oxide (PPO)) has been investigated using ab initio molecular orbital theory at the HF/6-31G^* level with molecular models for the polymers. Coordination by one to six oxygens was considered. In addition, higher level calculations were carried out using G3(MP2) theory for coordination of Li⁺ by one oxygen. For coordination of lithium by one oxygen, the binding energy ordering is PTMO>PPO>PEO, with PTMO having the largest lithium cation affinity. The same ordering is found for larger coordination numbers with the exception of coordination by six oxygens, where the ordering changes due to the steric interactions.     

Potentiation of the time-dependent, antidepressant-induced changes in the agonistic behaviour of resident rats by the 5-HT1A receptor antagonist, WAY-100635

Acute and chronic antidepressant drug treatments respectively decrease and increase the aggressive behaviour of resident rats during encounters with unfamiliar conspecifics. We have now examined the effect of the 5-hydroxytryptamine1A receptor antagonist, WAY-100635, on fluoxetine-, paroxetine- or venlafaxine-induced changes in aggression. WAY-100635 (0.1 mg/kg), which did not modify behaviour when given alone, potentiated the venlafaxine (5.54 mg/kg)-induced reduction in aggression after acute treatment and, during chronic treatment, accelerated the fluoxetine (0.34 mg/kg/day)-induced increase in aggression, from day 5 to day 2. A similar change in time course was seen with paroxetine (0.33 mg/kg/day), although the increase in aggression was smaller. Venlafaxine (5.54 mg/kg/day, alone or co-administered with WAY-100635) increased aggression by day 2. During chronic treatment, therefore, venlafaxine, at the dose used, had a more rapid onset of action than either fluoxetine or paroxetine, whereas the fluoxetine- and paroxetine-, but not the venlafaxine-, induced increase in aggression was accelerated by WAY-100635. These studies further support the hypothesis that selective blockade of the 5-hydroxytryptamine1A receptor augments the effects of antidepressant drugs in an animal model predictive of antidepressant activity, presumably by concomitant blockade of the somatodendritic 5-hydroxytryptamine1A autoreceptor-mediated negative feedback system of serotonergic neurones.     

A new approach to digital current differential protection for lowand medium voltage feeder circuits using a digital voice-frequency gradecommunications channel

A new approach to digital current differential protection is described which provides the capabilities of conventional pilot wire differential protection while using the limited data transfer capabilities of a digital data voice-frequency grade communications channel. This approach compares polyphase polarised current measurements taken at the feeder's terminals to detect faults and can trip in under two power system cycles. The algorithms decouple the measurements from the power system frequency and its waveform, and thereby have a high inherent tolerance to the complications introduced by communication channel delays and their fluctuations. For this project, the communications requirements have been limited to a full duplex 2400 bits/sec system suitable for operation over a voice-frequency grade channel     

Rater reliability and concurrent validity of the Keyboard Personal Computer Style instrument (K-PeCS)

This paper describes the inter-rater and intra-rater reliability, and the concurrent validity of an observational instrument, the Keyboard Personal Computer Style instrument (K-PeCS), which assesses stereotypical postures and movements associated with computer keyboard use. Three trained raters independently rated the video clips of 45 computer keyboard users to ascertain inter-rater reliability, and then re-rated a sub-sample of 15 video clips to ascertain intra-rater reliability. Concurrent validity was assessed by comparing the ratings obtained using the K-PeCS to scores developed from a 3D motion analysis system. The overall K-PeCS had excellent reliability [inter-rater: intra-class correlation coefficients (ICC)=.90; intra-rater: ICC=.92]. Most individual items on the K-PeCS had from good to excellent reliability, although six items fell below ICC=.75. Those K-PeCS items that were assessed for concurrent validity compared favorably to the motion analysis data for all but two items. These results suggest that most items on the K-PeCS can be used to reliably document computer keyboarding style.     

Kinematics of heelstrike during walking and carrying: implications for slip resistance testing

Slip resistance measurements of shoes and floors are used to evaluate the potential for slip and fall injuries. These measurements are believed to have increased validity when they more closely reflect actual heelstrike biomechanics during locomotion. The purpose of this study was to describe heelstrike kinematics during load carrying to provide data towards improved slip resistance testing. Foot kinematics during load carrying (unladen and carrying from 0 to 13.5 kg) at various cadences (70, 90, 100 steps/min) was recorded. Measures before, during and after heelstrike were analysed. Cadence was an important predictor for all variables measured, associated with changes from 13% to over 100%. The load carried was an important predictor for only the heel slip distance after heelstrike, but this effect needs to be investigated further. These results can be used to improve the fidelity of slip resistance measurements, which is critical to reduce slip and fall injuries in the workplace or during activities of daily living.     

Biomechanics of slips.

The biomechanics of slips are an important component in the prevention of fall-related injuries. The purpose of this paper is to review the available literature on the biomechanics of gait relevant to slips. This knowledge can be used to develop slip resistance testing methodologies and to determine critical differences in human behaviour between slips leading to recovery and those resulting in falls. Ground reaction forces at the shoe-floor interface have been extensively studied and are probably the most critical biomechanical factor in slips. The ratio of the shear to normal foot forces generated during gait, known as the required coefficient of friction (RCOF) during normal locomotion on dry surfaces or 'friction used/achievable' during slips, has been one biomechanical variable most closely associated with the measured frictional properties of the shoe/floor interface (usually the coefficient of friction or COF). Other biomechanical factors that also play an important role are the kinematics of the foot at heel contact and human responses to slipping perturbations, often evident in the moments generated at the lower extremity joints and postural adaptations. In addition, it must be realized that the biomechanics are dependent upon the capabilities of the postural control system, the mental set of the individual, and the perception of the environment, particularly, the danger of slipping. The focus of this paper is to review what is known regarding the kinematics and kinetics of walking on surfaces under a variety of environmental conditions. Finally, we discuss future biomechanical research needs to help to improve walkway-friction measurements and safety.     

Balancing power supply and demand in remote off‐grid regions by means of a novel micro‐scale combined feedstock biomass generation plant

Providing electricity to a group of remote domestic or industrial customers can be achieved by a grid connection, or by an off‐grid (island) generator. While the former can become costly and will likely be prone to disruption, the latter is normally based on fossil fuels, which makes fuel sourcing and transport critical. To overcome these obstacles, a novel micro‐scale biomass generation plant was developed. This plant uses locally available renewable biomass feedstock to generate decentralized power at the point of demand and without the necessity of a grid connection. In this paper, load simulations on the basis of a process simulation model of the plant are performed to achieve a continuous match of supply and demand. It is analysed which load characteristics and fluctuations have to be expected when generating for a remote group of domestic customers, and it is evaluated how the plant needs to be operated to always provide sufficient power. Additionally, the fuel storage system of the plant system is investigated: The plant does not employ electrical storage, but instead matches demand and supply by means of internal usage of heat and power and through fuel storage. Relative and absolute storage levels as well as the storage charge/discharge cycles are analysed, and it will be shown that the plant can easily accommodate severe load fluctuations. Finally, the plant load factors are evaluated, and the findings show that this design is an interesting alternative to common island generators or to a conventional grid connection for remote customers. Copyright © 2009 John Wiley & Sons, Ltd.     

Designing safe job rotation schedules using optimization and heuristic search

Job rotation is one method that is sometimes used to reduce exposure to strenuous materials handling; however, developing effective rotation schedules can be complex in even moderate sized facilities. The purpose of this research is to develop methods of incorporating safety criteria into scheduling algorithms to produce job rotation schedules that reduce the potential for injury. Integer programming and a genetic algorithm were used to construct job rotation schedules. Schedules were comprised of lifting tasks whose potential for causing injury was assessed with the Job Severity Index. Each method was used to design four job rotation schedules that met specified safety criteria in a working environment where the object weight, horizontal distance and repetition rate varied over time. Each rotation was assigned to a specific gender/lifting capacity group. Five versions of the integer programming search method were applied to this problem. Each version generated one job rotation schedule. The genetic algorithm model was able to create a population of 437 feasible solutions to the rotation problem. Utilizing cluster analysis, a rule set was derived from the genetic algorithm generated solutions. These rules provided guidelines for designing safe job rotation schedules without the use of a computer. The advantages and limitations of these approaches in developing administrative controls for the prevention of back injury are discussed.     

Characterization of ferroresonant modes in HV substation with CB grading capacitors

This paper reports a ferroresonant experience involving inductive voltage transformers (VT's) in a 400 kV substation equipped with circuit breaker grading capacitors. Field measurements are presented and compared with ATP/EMTP simulation results, showing very good agreement. A parametric analysis has been performed to investigate the effect of the substation capacitance on the occurrence of ferroresonance. Fundamental frequency and sub-harmonic ferroresonant modes have been identified and compiled in a bifurcation diagram. The methodology presented can be used to create risk maps of avoidable switching operations or substation configurations.     

DIAGENETIC EVOLUTION OF INCISED CHANNEL SANDSTONES: IMPLICATIONS FOR RESERVOIR CHARACTERISATION OF THE LOWER CARBONIFEROUS MARAR FORMATION, GHADAMES BASIN, WESTERN LIBYA

This paper assesses the diagenetic history of potential fluvial hydrocarbon reservoir rocks deposited within incised valley systems of the Lower Carboniferous Marar Formation in western Libya. Outcrop data were collected in the Tinedhan Anticline, located at the southern margin of the Ghadames Basin. Four discrete intervals with channelized sandstones were identified in a section dominated by alternating offshore mudstones and shallow-marine clastics. The incised channels were cut during major sea-level lowstands, and filled by fluvial sandstone packages up to 50 m thick. Fifty-eight samples from four different localities, representing three lowstand systems tracts, were analysed to obtain a statistically meaningful mineralogical and compositional dataset. In addition to burial compaction, three main diagenetic events influenced the reservoir quality of the sandstones. Firstly, early eodiagenesis involved kaolinitization of plagioclase grains. This began before subsequent calcite cementation, probably as a result of flushing by meteoric pore-waters. The deformation of kaolinite during later compaction resulted in the formation of pseudomatrix which further reduced porosity and permeability. Kaolinite is commonly transformed to illite at temperatures above 140°C in the presence of K-feldspar. Although K-feldspar was recorded in the samples, no illite was observed, suggesting that the Lower Carboniferous strata in the study area were not buried in excess of approximately 3.5 km. The second diagenetic phase was the precipitation of calcite cement, present either dispersed throughout the sandbodies or as concretions up to 2 m across, in both cases reducing reservoir quality. The high intergranular volumes (IGV) of calcite-cemented sandstones (ranging between 35% and 40%) suggest that cementation occurred at burial depths of <500 m. Sandstones without calcite cement have lower IGV of between 17% and 25% as a result of mechanical and chemical compaction. Stable C and O isotope analysis of the calcite cement also supports precipitation at shallow burial depths, indicating a meteoric pore-water source for the calcite. The third and final diagenetic stage was partial chloritisation of kaolinite during meso-diagenesis. The elevated temperatures required for this transformation indicate burial to a minimum depth of approximately 2.5 km, which is consistent with the compaction data. Despite these diagenetic effects, the fluvial sandstones have an average porosity of 12%, with a range from 0.5% up to 25%. Permeability measurements on four sandstone samples indicate that the development of pseudomatrix did not reduce permeability significantly.