Time Decay of the Activity of the Reduction Reaction of NO by CO on a Pd/Al2O3 Catalyst

An experimental study is made of the time decay of activity of the CO–NO reaction on a Pd/Al₂O₃ looking at the effect on reaction order and apparent activation energy. The optimum kinetics parameters fitting the steady state data at moderate pressures are determined. The time decay curves are analyzed through various catalyst deactivation models.     

Progressive scoliosis with vertebral rotation after lumbar intervertebral disc herniation in a 10-year-old girl

A case report of a 10-year old girl with a herniated disc is presented. The most significant symptoms were progressive scoliosis with a flat back and paravertebral muscle spasm. An absent H reflex on the left and an increased latency of the somatosensory-evoked potentials of the left posterior tibial nerve were found. The computed tomographic scan of the lumbar spine showed a large central left-sided disc protrusion at the L5-S1 level. Our case presents the youngest patient with documented intervertebral disc herniation and the only one with severe scoliosis and vertebral rotation. The curve was not structural because it improved with surgery and an orthosis was not necessary.     

Modelling Industrial Wastewater Ozonation In Bubble Contactors. 1. Rate Coefficient Determination

A study of the ozonation of distillery and tomato wastewaters was carried out in a small bubble contactor in order to obtain kinetic data for scaling-up. Thus, several parameters, such as chemical oxygen demand (COD), 254 nm absorbance (A₂₅₄) and organic carbon content (OC), were followed during ozonation at different experimental conditions.

For distillery wastewaters all parameters investigated have the highest decreases during the first minutes of ozonation, A₂₅₄ showing the highest disappearance rates. Thus, during the first fifteen minutes of ozonation an important decrease of the 254 nm absorbance (? 75%) was observed. At further reaction times values of all parameters studied decrease slowly, eventually reaching a plateau value. During approximately the first two hours of reaction, dissolved ozone was never found, which suggested that fast or moderate gas-liquid reactions took place in the wastewaters.     

Optimizing location and size of rural schools in Chile

The Chilean Ministry of Education oversees preschool, primary, and secondary education in both urban and rural areas. Many parts of Chile are sparsely populated and there are currently over 4,000 rural schools (almost 38% of all schools in Chile) educating 9.5% of the students in the country. Many of the rural schools are small with only one teacher responsible for instruction of all local students (multigrade schools). The geographical distribution of the rural schools has not been coordinated and this has resulted in unequal utilization of existing schools and some unreasonably long travel distances by students. Good management of the rural schools is fundamental to meeting Chile's goal of providing quality education to its citizens. Seeking to improve the situation, the Ministry of Education ordered a study of the optimal location and size of rural schools with the general goals of reducing the number of lesser quality multigrade schools and reducing student travel distances while maintaining reasonable costs. This paper presents results of this study obtained using an integer linear program that has been embedded in a geographical information system. We present computational results for the entire country. Recommendations include where to open new rural schools as well as where to expand, reduce, close, or leave unchanged existing schools. We show how recommendations are sensitive to key parameters such as the cost of transportation.     

Substitution bias and the construction of a spatial cost of living index*

We estimate the spatial substitution bias based on the difference between a price index (PI) and the true cost of living (COL). This bias is computed at three geographical scales, using several fixed baskets and across different expenditures quartiles. Our results show a significant substitution bias for small geographical units. The choice of the base basket is also relevant for the bias estimation. Finally, the spatial substitution bias is larger for upper side of the expenditure distribution due to the heterogeneity in the consumption basket. This exercise shows that the spatial dimension affects the construction of a price index and that the approach of fixed baskets should be carefully considered in the estimation of spatial price differentials.     

Physicochemical and Theoretical Characterization of a New Small Non-Metal Schiff Base with a Differential Antimicrobial Effect against Gram-Positive Bacteria

Searching for adequate and effective compounds displaying antimicrobial activities, especially against Gram-positive bacteria, is an important research area due to the high hospitalization and mortality rates of these bacterial infections in both the human and veterinary fields. In this work, we explored (E)-4-amino-3-((3,5-di-tert-butyl-2-hydroxybenzylidene)amino) benzoic acid (SB-1, harboring an intramolecular hydrogen bond) and (E)-2-((4-nitrobenzilidene)amino)aniline (SB-2), two Schiff bases derivatives. Results demonstrated that SB-1 showed an antibacterial activity determined by the minimal inhibitory concentration (MIC) against Staphylococcus aureus, Enterococcus faecalis, and Bacillus cereus (Gram-positive bacteria involved in human and animal diseases such as skin infections, pneumonia, diarrheal syndrome, and urinary tract infections, among others), which was similar to that shown by the classical antibiotic chloramphenicol. By contrast, this compound showed no effect against Gram-negative bacteria (Klebsiella pneumoniae, Escherichia coli, and Salmonella enterica). Furthermore, we provide a comprehensive physicochemical and theoretical characterization of SB-1 (as well as several analyses for SB-2), including elemental analysis, ESMS, ¹H and ¹³C NMR (assigned by 1D and 2D techniques), DEPT, UV-Vis, FTIR, and cyclic voltammetry. We also performed a computational study through the DFT theory level, including geometry optimization, TD-DFT, NBO, and global and local reactivity analyses.     

DNS of turbulent thermal boundary layers up to Reθ = 2300

A technique, based on the Lund et al. (1998) [1] approach, is introduced in order to numerically prescribe time-dependent turbulent inflow conditions in spatially-developing thermal boundary layers. A major difference with Lund’s approach is that the new multi-scale approach considers different scaling laws for the inner and outer parts of the boundary layer. Direct numerical simulations (DNS) are performed for incompressible zero (ZPG) and adverse (APG) pressure gradient flows. To the best of our knowledge, the present DNS in ZPG flows at a momentum thickness Reynolds numbers (Re_θ) of 2300 represents the evolving thermal boundary layer simulations at the highest Re_θ in the turbulence community. The temperature is treated as a passive scalar with isothermal walls as a boundary condition and a molecular Prandtl number of 0.71. The predicted Stanton number shows fairly good agreement with empirical correlations, and experimental and numerical data from the literature. Moreover, the influences of the Reynolds number and the APG strength on thermal parameters are also examined. Furthermore, the budget of the temperature variance shows a significant increase of production, turbulent diffusion, and dissipation in the buffer layer at higher Reynolds numbers. The main effects of adverse pressure gradients on the temperature field are manifested by a decreasing trend of thermal fluctuations but an increasing trend of the wall-normal turbulent heat fluxes when normalized by wall units as the APG strength is augmented.     

Catalytic performance of silica-aluminas synthesised with the help of chitosan biopolymer

Mesoporous amorphous silica-aluminas were synthesised with standard aluminium and silicon sources by means of the formation of inorganic–organic composites with the addition of chitosan biopolymer, and compared to analogous catalysts synthesised conventionally. Some catalysts were subjected to hydrothermal treatment. The resulting specific surface areas were from 480 to 573 m²/g in the untreated samples and 300–430 m²/g in the hydrotreated catalysts, average pore sizes ranging from 32 to 100 Å with sharp, unimodal distributions. The chitosan materials showed higher specific surface areas and larger pore sizes than those of their non-chitosan counterparts. The most important differences in the acidic properties were in the relationships between tetrahedral and octahedral aluminium atoms, the chitosan materials having higher relative amounts of tetrahedral aluminium than the conventional silica-aluminas. Evidences of stabilization in the physical and chemical properties were observed in the chitosan-containing catalysts. The catalytic performance was evaluated with the conversion of tri-isopropylbenzene at 400 °C, to assess activity and accessibility, and cyclohexene at 300 °C, to assess hydrogen transfer properties. The highest activity and accessibility was observed in the hydrotreated, chitosan-containing catalyst, while hydrogen transfer capabilities were similar to those of medium unit cell sizes, equilibrium commercial FCC catalysts.     

Morphology study of progesterone polymorphs prepared by polymer‐induced heteronucleation (PIHn)

In this article, morphology of progesterone polymorphs prepared by polymer‐induced heteronucleation (PIHn) technique was studied. Hydroxypropyl methylcellulose(HPMC), such as dextran T‐500 and gelatin G‐9382, polyisoprene (PI), and acrylonitrile/butadiene copolymer (NBR) were used as substrates. The crystallizations were performed by solvent evaporation at room temperature from 0.5, 10, and 40 mg/ml solutions in chloroform and acetone. Progesterone polymorphs were identified by X‐ray diffraction. Differential scanning calorimetry and total attenuated reflectance infrared spectroscopy were used as complementary techniques in the identification. Depending on the polymeric matrix and the concentration used, form 1, form 2, or mixture of both polymorphs were obtained. Scanning electron microscopy pictures evidenced difference in morphology and in homogeneity of the two progesterone polymorphs. These polymorphs prepared by PIHn, did not present a distinctive morphology that allows identifying polymorph by its crystal habit. Hence, polymeric matrix induced the crystallization, affecting polymorphism and morphology. SCANNING 35:213‐221, 2013. © 2012 Wiley Periodicals, Inc.