Leaching of blended copper slag in microwave oven

Leaching of blended slag (BS) was investigated in a microwave oven using hydrogen peroxide and acetic acid. The BS was a mixture of converter and flash furnace slag containing 51% Fe₂O₃, 3.8% CuO, and 3.2% ZnO. The important variables that influence the metal extraction yield were leaching time, liquid-solid ratio, H₂O₂ and CH₃COOH concentrations. The preferred leaching conditions were as follows: CH₃COOH concentration 4 mol/L; H₂O₂ concentration 4 mol/L; microwave power 900 W; leaching time 30 min; liquid-solid ratio 25 mL/g BS; leaching temperature 100 °C. Under these conditions, the metal extractions of 95% Cu, 1.6% Fe, and 30% Zn were obtained. The results were compared with the traditional leaching results. It is evident that microwave heating causes a reduction in the leaching time. Also, the extraction yield results indicate that selective leaching of BS can be achieved under the preferred conditions. The dissolution kinetic of BS in hydrogen peroxide with acetic acid is controlled by a shrinking unreacted core model equation. The apparent activation energy and reaction order were found to be 16.64 kJ/mol and 1.09, respectively.     

Non-inductive start up of QUEST plasma by RF power

Both start-up and sustainment of plasma were successfully achieved by fully non-inductive current drive using microwave with a frequency of 8.2 GHz. Plasmas current of 15 kA was implemented for 1 s. Magnetic surface reconstruction exhibited a plasma shape with an aspect ratio of below 1.5. The plasma current was dependent significantly on the launchen microwave power and vertical magnetic field, whiile not affected by the mode of launched wave and the toroidal refractive index. Hard X-ray (HXR) emitted from energetic electrons accelerated by the microwave was observed, and the discharge with a plasma current over 4 kA followed the same trend as the number of photons of 10 to 12 keV. This suggests that the plasma current may be driven by energetic electrons. Based on the experimental conditions, alternative explanations of how the plasma current could be driven are discussed.     

Canonic form state space realization of two dimensional transfer functions having separable denominator

In this paper a procedure is developed for the computation of a state space realization from two dimensional transfer functions with separable denominator. The procedure relies on a canonic form for the state space realization.     

纤维在复合材料中的应用

作为开拓未来纤维科学的复合材料研究,本文重点叙述目前被广泛注目的柔性复合材料的现状和展望,同时,也探讨了解决21世纪诸问题中复合材料的作用。     

Macro-scale complexity of nano- to micro-scale architecture of olivine crystals through an iodine vapour transport mechanism

The production of nano- to micro-scale olivine (magnesium and iron silicate) crystals has been achieved at relatively low temperatures through an iodine vapour transport of the metal onto amorphous silicon dioxide. The process occurs down a temperature gradient from 800 to 600 °C yielding high quality crystals with long range crystallinity, highly complex interconnectivity and intricate macroscale architecture. Scanning electron microscopy (SEM) imaging of the substrate before and after the reaction reveals that the amorphous silicon oxide species is mobile, due to the lack of correlation between the silicon oxide layer and the final olivine particles, leading to a vapour–liquid–solid or vapour–solid growth mechanism. This technique demonstrates a facile, low temperature synthetic route towards olivine crystals with nano- to micro-scale dimensions.     

Formation of Low Aspect Ratio Torus Equilibria by ECH in the LATE Device

By ECH under a steady By field, a closed field equilibrium of a low aspect ratio as low as R/a = 1.4 is spontaneously formed in the LATE device. After the spontaneous formation, the plasma current has increased further up to Ip = 7.2 kA by 2.45 GHz, 30 kW and Ip = 11 kA by 5 GHz, 120 kW, by increasing the microwave power with a slow ramp of By for the equilibrium of the plasma loop at larger currents. Both amount to 12% of the total toroidai coil current. ECH/ECCD at 2nd harmonic resonance of EBW supports the plasma. An outline of the theoretical considerations for the formation process is presented.     

一个封闭的潜热热能存储系统的第一与第二定律分析

First and Second Law analyses were conducted to evaluate the performance of a closed latent heat thermal energy storage (LHTES) system employing calcium chloride hexahydrate (CaCl2-6H2O).The First and the Second Laws of thermodynamics were applied to the system from viewpoint of energy and exergy analyses,respectively. The energy storage tank in the system is neither fully mixed nor fully stratified. It may be considered as semithermal stratified. Experiments that include both charging and discharging periods were performed on sunny winter days in 1996. The energy and exergy variations and the overall energy and exergy efficiencies of the closed LHTES system were calculated for the complete charging and discharging cycle of the selected fifteen clear-sky winter days. Mean energy and exergy efficiencies were found to be 55.20% and 34.83%, respectively.     

The Proposal of Isolated Single‐Stage AC‐DC Converter

An isolated ac‐dc converter has been used in various applications, such as power supply and as a battery charger for electric vehicle. In conventional converters, a loss in each conversion stage can be reduced by applying a soft switching method. However, a conventional converter has many conversion stages including the rectifier stage, power factor correction, and dc/dc converter stages; thus, it is difficult to reduce the total converter loss and size. In this paper, we propose a novel isolated‐type ac‐dc converter with only one conversion stage; it can realize a zero‐voltage switching operation in all switching devices.     

融化过程中作为潜能储存材料的月桂酸的热特性的实验研究

The objective of this study was to establish the thermal characteristics of the lauric acid (95% purity) as a latent heat storage material filled in the annulus of vertical concentric double pipe during its melting process,The temperature data were used to determine the thermal characteristics,including the temporal temperature variations and the effects of the mass flow rate and the inlet temperature of the heat transfer fluid on the heat transfer coefficient and the heat charging fraction during the melting process,The results indicated that the time to reach to heat charging fraction of 1.0 could be altered by changing the mass flow rate and the inlet temperature of the heat transfer fluid.