Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Selective detection and differentiation of subgenus B adenoviruses (types 3, 7 and 11) by polymerase chain reaction

Application of the polymerase chain reaction (PCR) method for detection of subgenus B adenoviruses (types 3, 7 and 11) was investigated. It is based on a simple (nonnested) PCR using primer pairs specific for the hexon-coding region. The PCR allowed amplification of DNA from subgenus B adenovirus prototype strains (types 3, 7 and 11) and adenovirus isolates (types 3 and 7), whereas it did not amplify DNA from subgenus A (type 31), C (types 1, 2, 5 and 6), D (types 8, 19 and 37), E (type 4) and adenovirus isolates (types 1, 2, 5 and 6). These results suggest that subgenus B adenoviruses (types 3, 7 and 11) are detectable selectively by means of PCR with primer pairs developed in this study. Amplified fragments from adenovirus types 3, 7 and 11 could be differentiated with restriction endonuclease analysis with Rsa I.     

Interleukin-6 cDNA transfected Lewis lung carcinoma cells show unaltered net tumour growth rate but cause weight loss and shortened survival in syngeneic mice

HuIL-6 cDNA, cloned into a neomycin resistant conferring expression vector, BMGNeo, was transfected into Lewis Lung Carcinoma (LLC) cells. LLC cells (5 x 10(6) ml-1) transfected with IL-6 cDNA (LLC-IL6) secreted IL-6 into the culture supernatant at a concentration of 9.9 ng ml-1 within 48 h. When 1,000,000 of untransfected LLC, BMGNeo vector transfected LLC (LLC-Neo) or LLC-IL6 cells were transplanted into C57BL/6 mice subcutaneously, the mean +/- s.d. of survival times of these mice were 33.3 +/- 9.7, 34.3 +/- 7.1 and 17.0 +/- 3.1 days, respectively. The survival time of LLC-IL6 cells transplanted mice was significantly shorter than that of LLC (P < 0.01) or LLC-Neo (P < 0.01) cells transplanted mice without a measurable difference of tumour size. Plasma concentration of IL-6 steadily increased in LLC-IL6 transplanted mice. Body weight and serum albumin were significantly lower in LLC-IL6 transplanted mice than in LLC transplanted mice. Mouse IL-1 alpha and mouse TNF-alpha were not detected in the plasma of LLC-IL6 transplanted mice. These data suggested that secretion of IL-6 from LLC cells was unable to alter net tumour growth rate but rather caused a state similar to cachexia without detectable increase of IL-1 alpha and TNF-alpha in the plasma. This state may be responsible for the shortened survival of LLC-IL6 tumour-bearing mice.     

Detection of hepatitis C virus RNA from the heart of patients with hypertrophic cardiomyopathy

We investigated hepatitis C virus (HCV) infection in 35 patients with hypertrophic cardiomyopathy and 40 patients with ischemic heart disease who were consecutively admitted to our hospital. Frequency of positive anti-HCV antibody was significantly higher in patients with hypertrophic cardiomyopathy (6 of 35 patients, 17.1%) than that in patients with ischemic heart disease (1 of 40 patients, 2.5%, p = 0.036). In three of these six patients with hypertrophic cardiomyopathy, HCV RNA was detected in myocardial tissue. In two of these three patients, HCV RNA was detected from biopsy and autopsy specimens of the ventricles, but not in the serum, suggesting that HCV may replicate in myocardial tissue and may be relevant to ventricular hypertrophy. Thus, HCV infection may play a role in the development of hypertrophic cardiomyopathy.     

Polarimetric Characteristics of sea ice in the sea of Okhotsk observed by airborne L-band SAR

The Phased-Array L-Band SAR (PALSAR) aboard the Advanced Land Observing Satellite (ALOS) is capable of globally acquiring fully polarimetric data. In order to confirm the ability of L-band polarimetric synthetic aperture radar (SAR) to investigate sea ice before the ALOS launch, we conducted a field experiment using an airborne Polarimetric and Interferometric SAR (Pi-SAR) in the Sea of Okhotsk in 1999. This paper presents the analyzed results of data acquired in that experiment. The extracted polarimetric parameters of several ice types suggested that polarimetric coherences and phase differences between right-right (RR) and left-left (LL) are good candidates for discriminating ice types. The polarimetric anisotropy as well as the beta angle of the first eigenvector calculated in the polarimetric decomposition procedure are alternative parameters that are sensitive to ice type differences. Due to the low depolarization characteristics of open water, it could be discriminated from sea ice by scattering entropy in all incidence angle ranges. From the relation between ice thickness and the polarimetric parameters, we found that backscattering coefficients and vertical (VV) to horizontal (HH) backscattering ratio are highly correlated with ice thickness. Since the ratio is sensitive to ice surface dielectric constants, a simple simulation using the integral equation method surface model was conducted by using the physical parameters of typical sea ice. A two-dimensional ice thickness map was derived from an empirical relation between the VV-to-HH backscattering ratio and ice thickness.     

Adsorption of urea,creatinine, and uric acid from three solution types using spherical activated carbon and its recyclability

In this paper, we propose that the urinary toxins from the wastewater be adsorbed on an adsorbent such as spherical activated carbon and the latter be regenerated by subjecting it to high temperatures to recycle activated carbon and also to recycle the water used in dialysis. We studied the adsorption of artificial waste dialysate, which is a mixed solution of urea, creatinine, and uric acid, and the separate solutions for each of these and found that their extents of adsorption onto the spherical activated carbon material were nearly identical. The amount of adsorption was approximately 1.4 mg·g^-1 for urea, 18 mg·g^-1 for creatinine, and 20 mg·g^-1 for uric acid. The urea, creatinine, and uric acid adsorbed onto the spherical activated carbon decomposed on heat treatment at 500℃, and the adsorption capacity of the spherical activated carbon was regenerated. Our study successfully demonstrated that the spherical activated carbon can be recycled in the waste dialysate treatment process.     

Identification of Tumor Suppressive Genes Regulated by miR-31-5p and miR-31-3p in Head and Neck Squamous Cell Carcinoma

We identified the microRNA (miRNA) expression signature of head and neck squamous cell carcinoma (HNSCC) tissues by RNA sequencing, in which 168 miRNAs were significantly upregulated, including both strands of the miR-31 duplex (miR-31-5p and miR-31-3p). The aims of this study were to identify networks of tumor suppressor genes regulated by miR-31-5p and miR-31-3p in HNSCC cells. Our functional assays showed that inhibition of miR-31-5p and miR-31-3p attenuated cancer cell malignant phenotypes (cell proliferation, migration, and invasion), suggesting that they had oncogenic potential in HNSCC cells. Our in silico analysis revealed 146 genes regulated by miR-31 in HNSCC cells. Among these targets, the low expression of seven genes (miR-31-5p targets: CACNB2 and IL34; miR-31-3p targets: CGNL1, CNTN3, GAS7, HOPX, and PBX1) was closely associated with poor prognosis in HNSCC. According to multivariate Cox regression analyses, the expression levels of five of those genes (CACNB2: p = 0.0189; IL34: p = 0.0425; CGNL1: p = 0.0014; CNTN3: p = 0.0304; and GAS7: p = 0.0412) were independent prognostic factors in patients with HNSCC. Our miRNA signature and miRNA-based approach will provide new insights into the molecular pathogenesis of HNSCC.     

Application of the solid polymer electrolyte (SPE) method to organic electrochemistry—III. Kolbe type reactions on Pt-SPE

The feasibility of a solid polymer electrolyte (SPE) method for Kolbe type reactions was investigated by using Pt-SPE composed with Nafion 415 and platinum. The Kolbe reaction of acetic acid proceeded effectively on one side and both sides Pt-SPE composites. The lower current efficiency was observed on the latter than on the former. Neat acetic acid could also be electrolysed on both sides SPE though the cell voltage was fairly high.A methanolic solution of monomethyl adipate was electrolysed to give dimethyl sebacate on both sides Pt-SPE according to the Brown-Walker reaction. The current efficiency and the terminal voltage increased with the concentration of monomethyl adipate. Pt-SPE behaved as an active electrode of a high roughness factor, eg about 6, for the Kolbe reaction of acetate.     

Characteristics of polypyrrole chemically synthesized by various oxidizing reagents

Polypyrrole was chemically synthesized using various oxidizing reagents and examined as a positive electrode material. Physical properties, morphologies and electrochemical characteristics of polypyrrole were greatly influenced by the oxidizing reagent used for polymerization. In general, polypyrrole with a smaller particle size and a larger specific surface area showed better discharge performance than that with a larger particle size and a smaller specific surface area. Polypyrrole was also synthesized on various conducting and nonconducting substrates using Fe(C10₄)₃ as an oxidizing reagent. By using PP nonwoven fabric as a substrate material, a high discharge capacity of 72 mA h g^–1 was obtained. Polypyrrole synthesized on only one side of PP nonwoven fabric was able to be used as an electrode.