Analytical Modeling of Surface Potential and Drain Current of Hetero-Dielectric DG TFET and Its Analog and Radio-Frequency Performance Evaluation

Semiconductors - In the present paper, analytical modeling of surface potential and drain current for hetero-dielectric double gate tunnel FET (HDG-TFET) has been done. The two dimensional (2D)...     

Preparation and physicochemical study of jute and glass composites of epoxy resin of (2E, 6E)-bis(4-hydroxybenzylidene)cyclohexanone

Polymer Bulletin - Jute and glass composites of epoxy resin of (2E, 6E)-bis(4-hydroxybenzylidene)cyclohexanone (EBHBC) were prepared by compressing molding technique using three different hardeners...     

Evaluation of Laminated Circular Elastomeric Bearings

This paper evaluates the behavior and performance of laminated circular elastomeric bearings and compares them to those of square and rectangular bearings. The study included an experimental evaluation and a nationwide survey of state Department of Transportations on the use and performance of circular bearings and bearings in general in their states. The experimental investigation studied the bearings' behavior in compression, compression and rotation, and compression and shear. Results from this limited study showed that the three bearings have similar stress-strain behavior in compression and they are in agreement with the AASHTO LRFD guide stress–strain curves. In compression and rotation, the AASHTO LRFD substructure moments are slightly less than the measured values for circular bearings and rectangular bearings rotated about their strong axis for a compressive stress of 10.3?MPa (1.5?ksi) and slightly higher than those of rectangular bearings rotated about their weak axis. In compression and shear, the shear stiffness of circular and square bearings is in agreement with theoretical values within the range of design displacements. Results from the survey showed that many states are using circular bearings and more states would consider using them, however no maintenance or monitoring data were available on their short-term and long-term performance.     

Are large firms internationalizing the generation of technology?Some new evidence

Internationalization of technology remains a subject of considerable interest to analysts and policy makers in the 1990s. This paper is a modest attempt at providing some new empirical observations for debate and discussion on one dimension of the subject, namely, the nature and extent of the production of technology undertaken by large firms outside their home base. The evidence, based on the US patenting activities of the world's largest 539 firms (based in 13 countries and covering 16 product groups), shows that for an overwhelming majority of them technology production remains close to the home base. It also shows that firms devoting a large proportion of their resources to technology are amongst the least internationalized. When these firms do go abroad, there is no systematic relationship between their relative presence in a technical field and the relative strength of the host country. The analysis points to the dangers of generalizing on the basis of anecdotal evidence from a small sample of firms from a particular country or sector     

Instron texture profile of buffalo milk cheddar cheese as influenced by composition and ripening changes

Buffalo milk Cheddar cheese samples of different ages were analysed for compositional attributes (CA), ripening indices (RI) and Instron Textural Profile (ITP). All samples were compositionally alike, except for pH and salt-in-moisture (SM) contents. RI showed significant variations. CA and RI showed highly significant correlations within themselves and with each other, except for moisture with pH, SM with moisture, MNFS, Fat and FDM and Fat with MNFS. The ITPs of cheeses showed significant variations and had highly significant intercorrelations indicating their interdependence. CA (except moisture and MNFS) and RI showed a highly significant correlationship with ITPs. Moisture content showed a highly significant correlationship with all ITPs, except cohesiveness and springiness, where it was significant. MNFS content showed significant correlations only with hardness and brittleness. Stepwise regression analysis revealed that MI was the most predominant factor influencing cheese texture, followed by pH, SM, FDM and TVFA. Knowing Ca and RI, the textural properties of cheeses can be forecast through mathematical equations. Similarly the age of cheese can also be predicted if RI and/or textural properties are known.     

Durability of hygrothermally aged graphite/epoxy woven composite under combined hygrothermal conditions

The objective of this study was to examine the effects of hygrothermal aging on the durability of a graphite/epoxy woven composite material system. The study was part of a larger project in which the objective was to evaluate and model the effects of moisture, temperature, and combined hygrothermal conditions on the strength and life of a graphite/epoxy woven composite material system. The results presented here represent an extension of the work by Patel and Case (Int. J. Fatigue 22 (2000) 809).

The hygrothermal aging consisted of cyclical temperature and moisture variations which were meant to simulate mission conditions for an advanced subsonic aircraft. Durability studies were carried out on the aged material system in the form of fatigue and residual strength testing under humid and elevated temperature environments. Damage mechanisms and failure modes were determined through fatigue testing, residual strength testing, and nondestructive evaluation.

Changes in physical appearance, thermal analysis results, fracture surfaces, and moisture diffusion behavior all supported the idea that the material was affected by the aging process. However, experimental testing also showed that the initial and residual tensile properties of the aged material were virtually unaffected by the imposed environmental aging (as compared to unaged material testing results), except when tested at elevated temperature. At elevated temperature, both the dynamic stiffness and residual strength were noticeably reduced from that at room temperature.     

Health insurance status and the use of emergency and other outpatient services by adults with sickle cell disease

STUDY OBJECTIVE: To evaluate insurance status and frequency of use of emergency services in adults with sickle cell disease. DESIGN: Retrospective analysis of visits. SETTING: Emergency department and outpatient clinics of an urban university hospital. PARTICIPANTS: One hundred seventy-two subjects, who made 771 visits to the ED during 1990. RESULTS: Of the 172 subjects, 31 were covered by commercial insurance, 32 were covered by Medicare, and 109 were covered by Medicaid or were uninsured. Insurance status and frequency of use of emergency services were independent (P > .05). On discriminant analysis, Medicaid-covered and uninsured subjects were correctly classified, but commercially insured and Medicare subjects were not. Medicaid and uninsured subjects were more likely to be younger and to live closer to the hospital (P < .00005). High-frequency users of emergency services were discriminated from low-frequency users. High-frequency users were more likely to be younger, to be users of primary-care services, and to live closer to the hospital (P = .0004). CONCLUSION: Provision of primary-care services or stable insurance in the form of commercial insurance or Medicare did not decrease use of emergency services in subjects with sickle cell disease in a group of patients selected from one urban academic ED.