Lipid-Lowering Effect of Eriocitrin, the Main Flavonoid in Lemon Fruit, in Rats on a High-Fat and High-Cholesterol Diet

ABSTRACT:  Eriocitrin (eriodictyol 7- O -β-rutinoside) is the main flavonoid in lemon fruit. In this study, eriocitrin was investigated for its lowering effect on serum and hepatic lipids in high-fat and high-cholesterol fed rats. Rats in the control group ( N = 6) were fed a 20% lard and 1% cholesterol diet for 21 d, and rats in the 0.35% eriocitrin group ( N = 6) and 0.70% eriocitrin group ( N = 6) were fed a diet supplemented with eriocitrin 0.35% and 0.70%, respectively. The content of hepatic total cholesterol and triglyceride in the eriocitrin group was no different from that of the control group. The total cholesterol, VLDL+LDL, triglyceride, and phospholipid in the serum of the 0.35% eriocitrin group showed significantly lower concentrations than the control group ( P < 0.05), although there was no difference in the HDL concentrations among the groups. The lowering effect of eriocitrin for serum total cholesterol was thought to be caused by a decrease in VLDL+LDL. The 0.35% eriocitrin group was shown to have a significant increase in excretion of fecal bile acid ( P < 0.05) and a tendency for enhanced hepatic m-RNA levels of LDL receptor in comparison with the control group.     

A simplified cascade current‐source inverter interconnected to a single‐phase three‐wire distribution system and its application to electric energy storage systems with batteries

A novel current source inverter system interconnected to the single‐phase grid is proposed. It has the same construction as the conventional three‐phase current source inverter that is interconnected to the single‐phase three‐wire distribution system. Though the proposed circuit has no output transformer, it can be equivalently performed as the single‐phase double cascade inverter by diverting the pole transformer in the utility system. By controlling the appropriate scheme, the output currents can be obtained as the five‐level waveforms and their distortions can be decreased sufficiently. It is applied to the interactive electric energy storage system with batteries and the basic discharging characteristics are discussed experimentally. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10380     

A new approach to species determination for yeast strains: DNA microarray-based comparative genomic hybridization using a yeast DNA microarray with 6000 genes

DNA-DNA hybridization is known as the superior method in the elucidation of relationships between closely related taxa, such as species and strain. For species determination we propose a new DNA-DNA hybridization method: the DNA microarray-based comparative genomic hybridization (CGH) method, using a yeast DNA microarray with approximately 6000 genes. The genome from a yeast strain as a sample strain (Sample) was labelled with Cy3-dye and hybridized to a single DNA microarray, together with the Cy5-labelled genome of S. cerevisiae S288C as a reference strain (Reference). The log2 ratio values [log2[Cy3(Sample)/Cy5(Reference)]: Ratio] of signal intensities of all the gene spots were estimated and divided into the following groups: Ratio < or = -1; -1 < Ratio < 1; 1 < or = Ratio. The hybridization profiles of the genomes of type strains belonging to the genus Saccharomyces were significantly different from that of S. cerevisiae S288C. The Ratio-based grouping allowed us to discriminate between some species from S. cerevisiae more clearly. Furthermore, cluster analysis discriminated between closely related species and strains. Using this method, we were able to not only perform species determination but also to obtain information on alternation in gene copy number of such gene amplifications and deletions with single-gene resolution. These observations indicated that DNA microarray-based CGH is a powerful system for species determination and comparative genome analysis.     

Microanalyses on the RuO2 Particle–Glass Matrix Interface in Thick-Film Resistors with Piezoresistive Effects

The piezoresistive mechanisms of composite thick films based on RuO₂ particles and both calcium-borosilicate and bismuth-borosilicate glass matrices were investigated by chemical and electrical microanalyses. The resistor based on bismuth-borosilicate glass showed higher sensitivity than that based on calcium-borosilicate glass. It was confirmed that the diffusion of ruthenium into glass affects the binding state of RuO₂ at the interface of the glass. Furthermore, an intermediate resistive layer is detected around the RuO₂ particle. These results suggest that the piezoresistive effect is related to a change in the electrical conductivity of the interfacial reaction layer caused by the diffusion of ruthenium into glass.     

A Large Matrix Reducgtion Method for Multiprocessors

Abstract: This paper treats a basic study on a methodology of large reduction of the huge stiffness matrix equation with many unknowns for application on very high speed supercomputer or connection machines. Until recently the substructured method according to the Neumann-type single processing has been used for the above purpose, whereas the method described here differs from its predecessor as pertaining to non-Neumann-type plural processing by the system of multilinked computers. The characteristics of the method exist in an algebraic and mechanical idea for the very large structural matrix equation, to make it constitute a properly decided number of independently blocked-in submatrix equations so as to be able to utilize the supercomputer or connection machines in the most eficient way. For this purpose, the method presented in this paper shows how to relocate and add rows and columns in the original structural stiffness matrix equation, taking the effective stiffnesses of intersected boundary members into proper consideration. Next, this method is applied to a simple rectangular frame as the first step, this time to consider and verifv its adequacy. Finally, some remarks are made on the comparative state between analytical results by this parallel processing for substructured matrices on it, and by the usual direct processing for its original matrix. It is concluded that the method presented here may be thought suficiently appropriate and useful for the object.     

Source contributions of sulfate aerosol over East Asia estimated by CMAQ-DDM

We applied the decoupled direct method (DDM), a sensitivity analysis technique for computing sensitivities accurately and efficiently, to determine the source-receptor relationships of anthropogenic SO(2) emissions to sulfate aerosol over East Asia. We assessed source contributions from East Asia being transported to Oki Island downwind from China and Korea during two air pollution episodes that occurred in July 2005. The contribution from China, particularly that from central eastern China (CEC), was found to dominate the sulfate aerosols. To study these contributions in more detail, CEC was divided into three regions, and the contributions from each region were examined. Source contributions exhibited both temporal and vertical variability, largely due to transport patterns imposed by the Asian summer monsoon. Our results are consistent with backward trajectory analyses. We found that anthropogenic SO(2) emissions from China produce significant quantities of summertime sulfate aerosols downwind of source areas. We used a parametric scaling method for estimating anthropogenic SO(2) emissions in China. Using column amounts of SO(2) derived from satellite data, and relationships between the column amounts of SO(2) and anthropogenic emissions, 2009 emissions were diagnosed. The results showed that 2009 emissions of SO(2) from China were equivalent to 2004 levels.     

Examination of Staphylococcus aureus survival and growth during cheese-making process

Inoculation tests of Staphylococcus aureus were performed to evaluate the risk of toxic hazard in cheese manufacturing processes. S. aureus was inoculated into pasteurized milk or cheese curd, and the survival and growth were examined. S. aureus grew only slightly or decreased in cell number under the manufacturing condition of semi-hard type cheese or soft-type cheese. Under the conditions of the fresh cheese making process, S. aureus slightly increased in cell number, though no enterotoxin was detected. In processed cheese, S. aureus did not grow at all. Growth inhibition of S. aureus by lactic acid produced from starter culture was suggested to be the cause of growth inhibition in the natural cheese.     

Instantaneous value control of current vector of energy transfer circuit with inductor converter bridges between superconducting magnets

Energy transfer circuits of inductor converter circuits (ICB), used for power supplies for superconducting magnets, are studied. Analytical solutions of steady-state characteristics of ICB energy transfer circuits are analyzed. On the basis of these solutions, a discussion is presented regarding a new control method of ICB transfer circuit to reduce a voltage ripple across a load superconducting magnet. This paper will propose a new control for line-commutated converters of ICB energy transfer circuit for quick changes in a transfer angle and a transfer frequency for the voltage ripple reduction control. Speeding-up of the proposed controls is also discussed. Validity of the proposed controls is confirmed by computer simulations.     

Structure and property correlation for Ag deposition on alpha-Al2O3--a first principle study

The nature of bonding at the interface between deposited silver and (001) surface of alpha-Al2O3 for both Al-terminated and OH-terminated has been investigated using a periodic ab initio method. Substantial inter-planar relaxations within the alumina were found at both the interfaces and the bulk. The periodic calculation with Ag deposition shows that 10% of Ag loading on alumina results maximum stability. Now, this is known that, the clean alumina surface only exists at UHV condition and normally the alumina surface prefers to stay hydroxylated. We have therefore compared the silver bonding over hydroxylated alumina surface and confirmed the fact that the hydroxylated surface binds silver weakly in comparison to the clean surface and it recommends that the silver cluster over the hydroxylated surface begins to join in to form three-dimensional nuclei. The deposited Ag forms a cluster on top of the alumina surface. The Ag atomic packing was monitored to rationalize the role of packing on activity of silver. Three low-index Ag surfaces (100), (110) and (111) are investigated via the ab initio density functional calculations with ultrasoft potentials. We have monitored the relation between Ag atomic packing and its electronic properties. The results show that the structural and electronic property of Ag deposited on alumina surface depends significantly on atomic packing. Ag110 over clean alumina surface shows highest surface energy and smallest work function, whereas for the OH-terminated surface it is the Ag111. The results are discussed in view of the existing experimental data and models of metal-oxide interface.     

Man-machine interface for modular robot systems

A modular robot is composed of multiple modules, each comprising a sensor, an actuator, and a control system. Each module accumulates information about its own sensor, actuator, and connections to other modules, as well as communication information between adjoining modules. The user obtains this information via an interface, and can thus recognize the state of the robot and issue commands. However, when the number of modules becomes large, the amount of information sent from the modules becomes too much for the user to deal with effectively. Naturally, it also becomes more difficult for the user to issue commands to the modular robot as the number of modules increases. In this study, we developed an interface to present, in a simple manner, information aggregated in a certain module from other modules, and we examined its effectiveness in a modular robot composed of these modules.