Photoelastic Effects in Phosphate Glasses

The stress-optical coefficients of RO-Pz05 glasses (R = Mg, Ca, Sr, Ba, and Zn) were measured, and the photoelasticity mechanisms were analyzed based on the equation expressing the relation among the photoelastic constants, the elastic moduli, and the refractive index of glasses. No simple relation was found between the stress-optical coefficient and the elastic modulus, indicating that the factor (p – q), where p and q are the Neumann strain-optical coefficients, is important. The change of (p – q) with glass composition is governed mainly by changes in the effect of the atoms, rather than the lattice. The atomic effect increases with decreasing radius of the divalent cation, except for Zn²⁺. The ZnO-containing glasses exhibit extraordinarily large atomic effects. The photo-elasticity mechanism is discussed in relation to the nature of the chemical bonds.     

Transient Stress Intensity Factors for Edge and Corner Cracks in Quench-Test Specimens

The transient temperature and stress fields in a quenched rectangular bar were computed and used to determine the stress intensity factors for midside and corner-edge cracks. The stress intensity factors, K ₁, are presented as a function of time, flaw size, and aspect ratio. The variations of AT, along the crack edge are given and the self-limiting growth of the crack depth is discussed in relation to the nonlimited surface growth.     

11B and 27Al Nuclear Quadrupole Interactions in SiO2-B2O3-Al2O3-R2O Glass Systems

Quadrupole interactions of ¹¹B and ²⁷Al in SiO₂-B₂O₃-Al₂O₃-R₂O glass systems were investigated to determine the structure of these glasses, which should be amenable to chemical strengthening. The ratio of BO₄ units to BO₃ units approached unity as the R₂O/Al₂O₃ ratio for compounds having fixed B₂O₃ contents approached unity. Nuclear quadrupole coupling constants ( e²Qq/h =2.73 to 2.93 MHz) were measured for the NMR spectra of ¹¹B triangles. The line shapes of ²⁷Al spectra varied with chemical composition, but a few glasses exhibited ²⁷Al line shapes similar to those of the AlO₄ triclusters in SiO₂-Al₂O₃-Na₂O glasses. Compositional trends in the formation of BO₄ and AlO₄ were deduced from the NMR spectra.     

Dependence of Vacuum Electrical Breakdown Field and Field Enhancement Factor on the Number of Apertures Drilled in Small Electrodes

Dark current based on field emission current is considered to be a factor causing the vacuum electrical breakdown between multiaperture acceleration grids in the JT‐60 negative ion source. In this paper, we focus on field enhancement factor, which is a key parameter of field emission from the electrode. Vacuum breakdown testing for small‐sized electrodes simulating the multiaperture acceleration grids of the negative ion source was performed. We found the field enhancement factor and breakdown field for multiaperture electrodes, and we investigated the dependence of each parameter on the number of apertures. The results revealed that an increase in the average field enhancement factor after the end of conditioning resulting from an increase in the number of apertures led to a decrease in the dielectric strength of the multiaperture electrodes.     

Finite-dimensional adaptive control for infinite-dimensional systems

This paper deals with the design of a finite-dimensional model reference adaptive controller for a distributed parameter system. The space of inputs and the space of outputs are both one dimensional. First an input—output representation is introduced, using filtered values generated from the inputs and outputs. Next it is shown that we can design a finite-dimensional adaptive control system by a new adaptive law. The new adaptive law guarantees the existence of a large region of attraction from which all signals are bounded and the tracking error converges to a small residual set.     

The Influence Analysis that a Phase Characteristic of the High‐Level Earthquake Gives to Vibration Response Characteristic of the 550‐kV Disconnectors

We developed the 550‐kV disconnectors that strengthened earthquake proofing by the addition of the damper unit and weight reduction of conductive part based on the damage of the 550‐kV disconnectors by the Great East Japan earthquake (March 11, 2011) and inspected the earthquake proofing performance by shake table test. In shake table test, we performed the test by the artificial seismic wave that varied in phase characteristic in addition to the test by resonance method. And, in a high‐level earthquake area, we analyzed it about the influence that a phase characteristic of the artificial seismic wave gave to stress to occur in disconnectors. As a result, it is thought that the stress to occur in disconnectors is decided by a primary natural frequency basically because a bending strain to occur to the disconnectors in the time when the resonance frequency ingredient becomes the big acceleration response value grows big. But, on a particular phase condition, it was confirmed that the bending strain to occur in disconnectors might grow big conspicuously. As for this, the possibility is thought about by influence of higher natural frequency doing superposition.     

Adaptive control for infinite-dimensional systems

This paper deals with the design of a model reference adaptive controller for a distributed parameter system generated by a self-adjoint operator. The space of inputs and the space of outputs are both one dimensional. After introducing input-output representations, an adaptive control system is designed for the system with unknown input function and unknown output function. The input-output equations can be expressed using filtered values generated from the inputs and outputs     

Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.     

Study on Power Fluctuation Dispatch and Capacity Design of Short Period Power Fluctuation Compensation System in Consideration of Power Loss

Since the output of photovoltaic (PV) generation includes power fluctuations caused by natural conditions, the installation of PV on a large scale is expected to affect load frequency control of the power grid. One method of compensating power fluctuations is the use of energy storage (ES), such as batteries and capacitors. A power fluctuation compensation system composed of an electrical double layer capacitor energy storage system (ESS) and a Li‐ion battery energy storage system is considered. The power loss characteristics of both ESSs during power fluctuation compensation are modeled by equivalent circuits based on ES impedance spectra. The models are validated by experiments simulating power fluctuation compensation. Using these ES models, simulations were carried out to determine the power fluctuation dispatch method between the two ESSs and the capacity of the ESSs in consideration of power loss minimization.     

Optical and EPR Studies of Redox Interactions of Polyvalent Ions (Cr, Cu) in Glass

Chromium centers in isolated Cr ions and Cr(III)-Cu(II) redox interactions were investigated by optical and EPR spectra. Line shapes and intensities of high-field Cr(III)-Cu(II) superimposed EPR absorption lines were sensitive to alkali content of host glasses. High-field chromium g values (1.94 to 1.99) and intensities (190 to 3600) were calculated. The increase in g values from 1.96 to 1.98 is related to an increase in Cr(V) and to a conversion from Cu(I) to Cu(II) with increased alkali content. Two components of Cr powder spectra near g = 2.0 and g = 5.0 correspond to isolated octahedral Cr centers described by Landry et al. Cr-Cr pair structure was not observed for low Cr₂O₃ concentrations. Three components of optical absorption bands near 340 nm, 430 to 460 nm, and 600 nm were measured in Cr(III)-Cu(II) redox systems. Electronic interactions of Cr(III)-Cu(II) redox systems and the structure of Cr centers are discussed.