Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Studies on syntheses and permeabilities of special polymer membranes. XVI. Permeation and separation characteristics of aqueous polymer solutions for acrylonitrile-styrene copolymer membranes

The permeation and separation characteristics of aqueous polymer solutions using acrylonitrile-styrene copolymer membranes were investigated under various conditions. The membranes obtained from dimethyl sulfoxide solution of acrylonitrile-styrene copolymer have not a sufficient reproducibility and stability of permeation. These lacks were improved by adding ethylene glycol or glycerol to the casting solution and treating the membranes with pressure. The permeation and separation characteristics were influenced significantly by the additional amount of above additives, the heat treatment temperature, and the operating pressure. It was found that the concentration polarization of poly(vinyl alcohol) molecules onto the surface of the acrylonitrile-styrene copolymer membranes is smaller than that onto hydrophilic polymer membranes such as membranes of cellulose acetate, cellulose nitrate, and nylon 12, etc. Moreover, the acrylonitrile-styrene copolymer membranes show better performance for separation and concentrating of aqueous polymer solutions than hydrophilic membranes.     

Aggregation arrestant pheromone of the German cockroach,Blattella germanica (L.) (Dictyoptera: Blattellidae): Isolation and structure elucidation of blattellastanoside-A and -B

The aggregation pheromone of the German cockroach,Blattella germanica, consists of attractant and arrestant, which can be detected by olfactometer and choice-chamber assay, respectively. Both were extracted from the frass-contaminated filter paper being used as a shelter. They were separated by solvent partition withn-butanol and water. The arrestant from then-butanol phase was purified by open column chromatography and then successive HPLC isolated two major arrestant components. Spectral evidence from SI-MS, HR-EI-MS, and NMR experiments with pulse techniques provided possible structures as 1-(6-chloro-4,5-epoxy-5-stigmast-3-yl)--d-glucopyranoside and 1-(6-chloro-5-hydroxy-5-stigmast-3-yl)--d-glu-copyranoside, denoted as blattellastanoside-A and blattellastanoside-B, respectively. They represented arrestant activity as median effective doses (ED₅₀) at 0.044 (A) and 3.2 (B) nmol on 1.0 cm² of Whatman No. 1 filter paper.     

A Hemispherical Image Sensor Array Fabricated with Organic Photomemory Transistors

Hemispherical image sensors simplify lens designs, reduce optical aberrations, and improve image resolution for compact wide-field-of-view cameras. To achieve hemispherical image sensors, organic materials are promising candidates due to the following advantages: tunability of optoelectronic/spectral response and low-temperature low-cost processes. Here, a photolithographic process is developed to prepare a hemispherical image sensor array using organic thin film photomemory transistors with a density of 308 pixels per square centimeter. This design includes only one photomemory transistor as a single active pixel, in contrast to the conventional pixel architecture, consisting of select/readout/reset transistors and a photodiode. The organic photomemory transistor, comprising light-sensitive organic semiconductor and charge-trapping dielectric, is able to achieve a linear photoresponse (light intensity range, from 1 to 50 W m⁻²), along with a responsivity as high as 1.6 A W⁻¹ (wavelength = 465 nm) for a dark current of 0.24 A m⁻² (drain voltage = −1.5 V). These observed values represent the best responsivity for similar dark currents among all the reported hemispherical image sensor arrays to date. A transfer method was further developed that does not damage organic materials for hemispherical organic photomemory transistor arrays. These developed techniques are scalable and are amenable for other high-resolution 3D organic semiconductor devices.     

Properties of EHD Pump with Combination of Rod-to-Rod and Meshy Parallel Plates Electrode Assemblies

A high pressure required to drive the liquid can be generated by the compact electrohydrodynamic (EHD) pumps with multiple pairs of the rod-to-rod and meshy parallel plates electrode assemblies arranged in series. In this work, the performance of EHD pumps with electrodes up to nine pairs has been examined as a function of the applied voltage using a semi-insulating liquid. The pressure generated by energized electrodes gives rise to the vigorous liquid flow and the liquid ejects from the pump outlet. The flow direction always is from the cathode toward the anode. The pressure increases with nearly the square of the applied voltage and in proportion to the number of electrode pairs. The maximum pressure head achieved with a series of nine electrode pairs is 25.3 kPa at 18 kV with maximum power consumption of 7.2 W. The generated pressure is maintained stably at constant level of the corresponding value. EHD pumping is attributed to conduction pumping based on an unbalance of heterocharges with single ionic polarity in the vicinity of the anode and cathode.     

An exciterless- and brushless-type commutatorless motor fed from atransformer in parallel with a voltage source inverter

A novel exciterless- and brushless-type commutatorless motor driven by a voltage source inverter is presented, and the analysis of the characteristics and the test results are reported. In the commutatorless motor, the stator armature winding is connected electrically with the secondary winding of a transformer. An AC exciting current flows in the armature winding simultaneously with the load current. The ratio between the number of poles made by the load current and the number of poles by the AC exciting current is 2 or 1/2. Thus, the motor can be made exciterless and brushless. Since the rotating direction of the rotating field made by the AC exciting current is opposite to that of the rotor in this commutatorless motor, speed control in a low-speed range is possible, because a large current can flow in the field winding even if the rotor rotates in a low-speed range. As a result, the motor can be controlled in a wide range, from high speed to low speed. It has been found from the analysis and the test results that a shunt wound characteristic between the speed and the torque and other characteristics can be obtained     

Compensation for neutral current harmonics in a three-phase four-wire system by a synchronous machine

This paper presents a new method that passively reduces the neutral current harmonics in a three-phase four-wire system by a synchronous machine. Selecting 2/3 as the coil pitch of the armature winding can minimize the zero-sequence reactance of the synchronous machine. The proposed method utilizes such a characteristic, which allows harmonic compensation by the synchronous machine. For analysis and design, an equivalent circuit for the third harmonic component of the basic system is derived. Using this equivalent circuit, its harmonic compensation characteristics are theoretically analyzed and design fundamentals are provided. Experimental results demonstrate the effectiveness of the proposed method and validate the theoretical analysis.     

Anomaly of 155Gd and 157Gd isotope effects in ligand exchange reactions observed by ion exchange chromatography

The isotope effects of gadolinium in Gd-EDTA ligand exchange system were studied by means of ion exchange chromatography. The separation coefficients of gadolinium isotopes, epsilon, and the local enrichment factors, beta, were calculated from the observed isotopic ratios at the front and rear boundaries of the gadolinium adsorption band. Clear mass independent anomalies were observed in the isotope effects of 155Gd and 157Gd. The relation between the isotope effects of gadolinium isotopes, studied by the three-isotope plot and the separation coefficient methods, and the mass of gadolinium isotopes was found to be related to the change in the mean square radius of the nuclear charge distribution parameter, (r2), of these isotopes, which suggests that the nucleus shape and size highly affect the gadolinium isotope effects in chemical exchange reactions.     

Evidence that activation of Src family kinase is not required for fertilization-associated [Ca2+]i oscillations in mouse eggs

Recent evidence in marine invertebrate, frog, and zebrafish eggs suggests the involvement of a Src family kinase (SFK) in fertilization-induced Ca2+ release. In the present study, we have investigated whether activation of an SFK is required for initiation of intracellular Ca2+ ([Ca2+]i) oscillations in mouse fertilization. We detected a Hck-like protein and tyrosine-phosphorylated proteins in soluble and insoluble sperm fractions, respectively. However, the presence of these proteins did not correspond to the active fractions of porcine sperm extracts (pSE). Moreover, [Ca2+]i oscillations induced by pSE in mouse eggs were unaltered by pre-incubation of pSE with specific SFK inhibitors such as 4-amino-5-(4-chlorophenyl)-7-(t-butyl)pyrazol[3,4-d]-pyrimidine (PP2) or lavendustin A, despite the fact that the inhibitors were shown to be active both in vivo and in vitro. Another SFK inhibitor, peptide A, blocked oscillations when incubated with pSE prior to injection into eggs, but this inhibition required more than ten times the concentration reportedly required to inhibit SFK activity. In addition, pre-injection or pre-incubation of eggs with these inhibitors did not affect the ability of pSE to trigger [Ca2+]i oscillations in mouse eggs. Microinjection of a recombinant c-Src protein or mRNAs encoding constitutively active Src proteins did not induce [Ca2+]i release. Finally, when sperm and eggs, both of which were pre-treated with PP2, were fertilized, [Ca2+]i oscillations occurred normally. We can therefore conclude that activation of an SFK is neither necessary nor sufficient for triggering fertilization-induced [Ca2+]i oscillations.