Separation of di- and tripeptides with solvent extraction and an emulsion liquid membrane

The extraction equilibria of various di- and tripeptides with di-2-ethylhexylphosphoric acid (D2EHPA) were studied at low pH values. The complex extracted to organic phase consisted of one molecule of peptide and two molecules of D2EHPA dimer. The extraction constants of the peptides correlated well with the distribution coefficients of peptides between 1-octanol and water, which is a measure of hydrophobicity. The permeation rates of peptides through an emulsion liquid membrane were examined by using D2EHPA as a carrier, Span 80 as an emulsifier and kerosene as a diluent. The rates varied considerably with peptide type, depending upon the hydrophobicity.     

Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

Transcellular retrograde labeling of radial glial cells with WGA-HRP and DiI in neonatal rat and hamster

Topographically distinct populations of radial glial cells in the diencephalon and mesencephalon of neonatal rats and hamsters were transcellularly labeled with wheat germ agglutinin conjugated to horseradish peroxidase (WGA-HRP) and with the lipophilic tracer DiI. A comparison of the histological distribution of the two tracers is suggestive of two different mechanisms of transcellular labeling. Intraocular injections of WGA-HRP resulted in the uptake of exogenously applied WGA-HRP by retinal ganglion cells, followed by anterograde axonal transport and exocytosis within the optic target nuclei. In addition to the transneuronal labeling, which is typical of such injections, we observed the transcellular labeling of the processes and somata of radial glial cells that were topographically associated with the terminal fields of the labeled axons. Similar transcellular labeling of radial glial cells associated with the axon terminal fields of the colliculogeniculate projection to the medial geniculate nucleus was observed following injections of WGA-HRP in the inferior colliculus. The transcellular labeling within the radial glial cells was discontinuous and somatopetally concentrated, indicating the existence of a retrograde active transport mechanism within the radial glial processes subsequent to its uptake following release of tracer from axons. This type of labeling can be referred to as transcellular retrograde glioplasmic transport. In contrast, DiI was used as a tracer through its capacity to diffuse within the plasmalemma. Topographically distinct populations of radial glial cells were transcellularly labeled following placements of DiI in the retina, inferior colliculus, or dorsal thalamus of fixed brains. The radial processes of labeled radial glial cells consistently extended into regions that also contained labeled axons. It is likely that the transcellular radial glial labeling with DiI occurred via transmembranous diffusion. These data indicate that a close structural and functional relation exists between axons and glial cells in the developing brain.     

Stress corrosion cracking of aged Al---4%Cu alloy in NaCl solution

Stress-corrosion lives and pitting potentials of Al---4%Cu alloys with various aging structures have been measured in de-aerated 1M NaCl under conditions of controlled potential. It was found that the alloys aged having the higher susceptibility to stress-corrosion cracking showed two pitting potentials corresponding to pitting at grain boundaries and grain bodies, respectively. The susceptibility to stress corrosion cracking of the alloys appeared above the pitting potentials for grain boundaries. The maximum susceptibility to stress-corrosion cracking was obtained when the alloy was aged to attain the largest difference in pitting potentials between grain boundaries and grain bodies.     

Vapor phase hydroformylation of ethene over Co/SiO2 promoted by noble metals: dynamic in situ diffuse reflectance FT-IR study of surface species

An in situ diffuse reflectance FT-IR technique was employed to investigate the active surface species and the reaction mechanism of the oxygenate formation in the vapor phase hydroformylation of ethene on Co/SiO₂ promoted with various noble metals such as Ir, Rh, Pt, Re, Ru, and Pd. Co(A)/SiO₂ and Ir(CO)/SiO₂ which were derived from cobalt(II) acetate and Ir₄(CO)₁₂, respectively, were quite inactive in the reaction, and showed only quite small peaks of adsorbed CO under the conditions of 1.1 MPa of C₂H₄/CO/H₂ at 298 K. In contrast, Co(A)-Ir(CO)/SiO₂, which were very active in the reaction, exhibited strong absorption bands of linear and bridged CO species. At 423–463 K, propanal adsorbed on the catalyst and acyl species which is suggested as the intermediate for the formation of propanal were also observed on this catalyst. By exposing CO preadsorbed on this catalyst to C₂H₄/H₂ at 289 K and 0.1 MPa, the intensity of the linear CO band decreased, and the bands of propanal and acyl species emerged simultaneously, whereas that of the bridged CO band remained constant after the initial drop. These results suggested that the oxygenates are formed via the CO insertion into adsorbed ethyl species, and linear CO species plays a major role in the CO insertion on these noble metal-promoted cobalt catalysts.     

Synthesis and properties of N,N'-unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s

N,N'- Unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s (in which alkyl = methyl, ethyl, propyl, butyl, isobutyl, pentyl, hexyl and octyl) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with the appropriate alkyl-amines. The properties of these derivatives as pigments were tested and their thermal stability measured.     

Synthesis and properties of N-alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide)

N′-Alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide) (alkyl = isobutyl, pentyl, hexyl, octyl, etc.; aryl = phenyl, p-tolyl, p-methoxyphenyl, etc.) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with arylamines (aniline, p-toluidine, p-anisidine, o-phenylenediamine, etc.). The properties of these derivatives as pigments were tested, and also the thermal stability of 3,4:9,10-perylenebis(dicarboximide) derivatives was measured.     

Ozone Generator with Cylindrical Type of Rotating Electrode

An ozone generator using a rotating electrode to improve ozone generation efficiency is proposed. The ozone generator electrode unit consists of a rotating electrode and fixed electrode. The rotating electrode has the grounded 36 pieces of tungsten wires fixed in parallel to the rotation axis on the rotating cylinder surface. A dielectric electrode is used as a fixed electrode located on the inside of the tube of the electrode unit. The width of the apparent discharge gap is 1mm. Alternating current with a frequency of 50 Hz is applied to the electrode unit. The rotation speed can be adjusted from 0 rpm to 1200 rpm by a variable speed motor. Oxygen gas is used as the material gas. Higher ozone concentration and higher ozone generation efficiency are obtained compared with that when the rotation speed is 0 rpm. The gas temperature is measured at the inlet and outlet of the ozone generator, and the rotation speed for the cooling effect is most effective at about 500 rpm. The maximum generation efficiency is estimated to be 61 g/kWh at 800 rpm, and this value is twice as large as in the case of 0 rpm.     

Electrochemical formation of Sm-Co alloys by codeposition of Sm and Co in a molten LiCl-KCl-SmCl3-CoCl2 system

Electrocodeposition of Sm and Co on a Cu substrate was investigated in a molten LiCl-KCl-SmCl₃ (0.5 mol.%)-CoCl₂ (0.1 mol.%) system at 723 K. Phase of the deposited Sm-Co alloys could be controlled by electrolysis potential. SmCo₃ was formed on a Cu substrate by potentiostatic electrolysis in the potential range of 0.20-0.90 V (vs. Li⁺/Li). Sm₂Co₁₇ was obtained in the potential range of 0.90-1.50 V.