Three-dimensional display of the bronchi using helical CT

The purpose of this study was to evaluate the clinical usefulness of three-dimensional (3D) images of the bronchi obtained using helical CT. Thirteen patients with lung cancer, one with tracheal diverticulum, and one with bronchial amyloidosis were examined. The CT scanner employed was the Toshiba Xforce. The helical CT scan cycle consisted of 20 continuous rotations, each requiring 1.5 sec, for a total scanning time of 30 sec. Scans were obtained using a 5-mm X-ray beam width, a 5-mm/1.5 sec couchtop sliding speed, and a 2-mm reconstruction interval. 3D images were reconstructed using a CEMAX VIPstation. The optimal lower and upper threshold CT values for 3D images of the bronchi were -650 and -100 HU, respectively, and 3D images clearly depicted endobronchial lesions. Cartilage crescents were also demonstrated, but longitudinal and circular mucosal folds could not be visualized. In conclusion, 3D images of the bronchi acquired using helical CT were useful in evaluating endobronchial lesions.     

Induced-fit association between DNA and esperamicin. Importance of structural flexibility in host DNA duplex

In this study, a series of synthetic oligonucleotide duplexes are tested as a substrate for esperamicin. The duplexes contain a typical binding sequence of esperamicin, 5'-GGA/TCC, but have different flexibilities in helix structure from each other. When cleavage activities of these oligonucleotides by esperamicin were estimated by using DNA sequencing method, a substantial increase of the cleavage at 3'-NAGG was observed with increasing the helix flexibility. This observation indicates that structural flexibility of host DNA duplex is important in an induced-fit association between esperamicin and DNA.     

Improvement in Thermoelectric Characteristics of n-type Iron Disilicide by Local Composition Modification

High thermoelectric figure of merit semiconducting ceramics of n -type iron disilicide with modified local compositions have been developed. Sintering and annealing of the composite powder composed of iron disilicide and precipitated cobalt (II) hydroxide resulted in the dissolution of excess Co and oxygen into the iron disilicide phase. Excess Co segregated to the grain boundary region, while interstitially incorporated oxygen was distributed homogeneously in the microstructure. The maximum figure of merit achieved was 5.2 × 10⁻⁴/K at 673 K.     

Hydrophobic effects on protein/nucleic acid interaction: enhancement of substrate binding by mutating tyrosine 45 to tryptophan in ribonuclease Tl

Hydrophobic effects on binding of ribonuclease Tl to guaninebases of several ribonucleotides have been proved by mutatinga hydrophobic residue at the recognition site and by measuringthe effect on binding. Mutation of a hydrophobic surface residueto a more hydrophobic residue (Tyr45 – Trp) enhances thebinding to ribonucleotides, including mononucleotide inhibitorand product, and a synthetic substrate-analog trinudeotide aswell as the binding to dinucleotide substrates and RNA. Enhancementson binding to non-substrate ribonucleotides by the mutationhave been observed with free energy changes ranging from –2.2 to – 3 .9 kJ/mol. These changes are in good agreementwith that of substrate binding, –2.3 kJ/mol, which iscalculated from Michaelis constants obtained from kinetic studies.It is shown, by comparing the observed and calculated changesin binding free energy with differences in the observed transferfree energy changes of the amino acid side chains from organicsolvents to water, that the enhancement observed on guaninebinding comes from the difference in the hydrophobic effectsof the side chains of tyrosine and tryptophan. Furthermore,a linear relationship between nucleolytic activities and hydrophobicityof the residues (Ala, Phe, Tyr, Trp) at position 45 is observed.The mutation could not change substantially the base specificityof RNase Tl, which exhibits a prime requirement for guaninebases of substrates.     

Non‐destructive evaluation of fatigue damage and fatigue crack initiation in type 316 stainless steel by positron annihilation line‐shape and lifetime analyses

Rotating bending fatigue tests were conducted using type 316 stainless steel. The fatigue tests were periodically terminated, and fatigue damage and fatigue crack initiation were non‐destructively and sequentially evaluated by positron annihilation line‐shape and lifetime analyses. The counter‐jig and anticoincidence methods were used for positron annihilation line‐shape and lifetime analyses, respectively, to enhance the analytical precision. The fatigue crack lengths were monitored by a plastic replication technique, and related to the parameters in both analyses. S‐parameter obtained in the line‐shape analysis increased with increasing fatigue damage, while it was difficult to detect fatigue crack initiation and subsequent small fatigue crack growth. That was because the precision of line‐shape analysis was limited. On the other hand, both fatigue damage and fatigue crack initiation were successfully detected by lifetime analysis. Positron annihilation lifetime also increased with increasing fatigue damage, and lifetime was longer at the notch root with fatigue crack than at the smooth section without crack. It was considered that the precision of lifetime analysis was high enough to detect high dislocation density areas at the fatigue crack tips.     

Curvature continuous path generation for autonomous vehicle using B-spline curves

In this paper we introduce a roadmap algorithm for generating collision-free paths in terms of cubic B-spline curves for unmanned vehicles used in mining operations. The algorithm automatically generates collision-free paths that are curvature continuous with an upper bounded curvature and a small slope discontinuity of curvature at knots, when we are given the locations of the obstacles, the boundary geometry of the working area, positions and directions of the vehicle at the start, loading, and the goal points. Our algorithm also allows us to find a switch back point where the vehicle reverses its direction to enter the loading area. Examples are provided to demonstrate the effectiveness of the proposed algorithms.     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.     

Survival of Salmonella Enteritidis PT 30 on inoculated almond kernels in hot water treatments

Almonds are blanched by exposure to hot water or steam-injected water to remove the pellicle (skin) from the kernel. This study evaluated the survival of Salmonella Enteritidis PT 30, Salmonella Senftenberg 775W and Enterococcus faecalis on whole raw almond kernels exposed to hot water. Whole, inoculated (7 to 9 log CFU/g) Nonpareil almonds (40 g) were submerged in 25 L of water maintained at 60, 70, 80 and 88 °C. Almonds were heated for up to 12 min, drained for 2 s, and transferred to 80 mL of cold (4 °C) tryptic soy broth. Almonds in broth were stomached at high speed for 2 min, serially diluted, plated onto tryptic soy and bismuth sulfite agars (Salmonella) or bile esculin agar (Enterococcus) and incubated at 37 °C for 24 and 48 h, respectively. D values of 2.6, 1.2, 0.75 and 0.39 min were calculated for exposure of S. Enteritidis PT 30 to water at 60, 70, 80 and 88 °C, respectively; the calculated z value was 35 C°. D values determined for Salmonella Senftenberg 775W and E. faecalis at 88 °C were 0.37 and 0.36 min, respectively. Neither Salmonella serovar could be recovered by enrichment of 1-g samples after almonds inoculated at 5 log CFU/g were heated at 88 °C for 2 min. These data will be useful to validate almond industry blanching processes.     

Experimental study of bubbly swirling flow in a vertical tube using ultrasonic velocity profiler (UVP) and wire mesh sensor (WMS)

Two-phase air-water bubbly swirling flow through a pipe is a complex turbulent flow and its prediction is still challenging. The present paper describes the experimental investigation of the air-water bubbly swirling flow in vertical co-current flow. Swirling flow is induced by a twisted tape in a 20 mm inner diameter pipe. The flow is investigated using Ultrasonic velocity profiler (UVP), which allows the measurement of liquid and gas velocities simultaneously. Furthermore, simultaneous measurement of void fraction is performed using Wire mesh sensor (WMS). The experimental results reveal that swirling flow has significant impact on bubbles’ distribution. In low liquid flow rate, the average bubble velocity is fairly uniform along the radial position and void fraction increases in the near wall region. However, increasing liquid flow rate at constant gas flow rate leads to increase in void fraction in the core region, this is mainly due to drift velocity which is affected by centrifugal force. Experimental findings and parametric trends based on the effects of swirling flow are summarized and discussed.     

Processing and 3D printing of SiCN polymer-derived ceramics

Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.