Process Intensification of Living Cationic Polymerization of Isobutylene by a Flow Reaction System

Increasing the reaction temperature of the living cationic polymerization of isobutylene is crucial for industrial production due to the cost of refrigeration. The reaction temperature increase was achieved with an accelerated reaction rate using a flow reaction system. The polymerization conditions, including the flow reactor design, were based on the results of kinetic studies. Utilizing a milli‐scale flow reactor, polyisobutylene, which has a narrow molecular weight distribution, was obtained within a considerably short residence time at a high temperature. Furthermore, it was confirmed that the value of M_w/M_n correlates with the product of the Reynolds number and the angle of collision.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO_4+δ , in which the phase separation observed in La₂CuO_4+δ is suppressed. A phase diagram in theT?δ plane is given for La_1.9Bi_0.1CuO_4+δ with excess oxygen. For very smallδ values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly atδ ～ 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<δ<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Air vent in water chamber and surface coating on liner slides concerning auxiliary cooling system for the high temperature engineering test reactor

Experimental study was made to confirm the validity of new designs of the auxiliary cooling system for the high temperature engineering test reactor (HTTR). First, it is necessary to vent residence air in outlet side of water chamber of the auxiliary heat exchanger for the HTTR. Accordingly, we have proposed to mount a proper bend duct in the outlet side of the water chamber. Air vent is done by difference between pressures at both ends of the bend duct caused by the forced water circulation using the water pumps. From flow tests, it was confirmed that it is capable of venting the air through the bend duct by circulating the water in maximum capacity of the water pumps. Second, it is essential to prevent seizure and excessive wear of the liner slides of the auxiliary concentric hot gas duct for the HTTR at a service temperature of 950°C. Therefore, we have put forward to coat titanium nitride (TiN) on the surface of the liner slides made of nickel-based superalloy Hastelloy XR using the thermochemical vapor deposition method. As a result of seizure and wear tests, it was confirmed that the TiN coating film of 3 μm on the surface of Hastelloy XR is sufficient.     

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/Er/1 queuing model

This paper analyzes a multi-product production / inventory system where demands for each item arrive according to a Poisson process and the production time for each product has an Erlang distribution. The paper proposes an optimality condition that specifies whether each product should be produced make-to-stock or make-to-order. In the event a product should be produced make-to-stock, an approach for computing the optimal base-stock level is proposed. Numerical examples are given for illustrative purpose.     

Carcinosarcoma of the rectosigmoid colon: report of a case

We report an unusual case of carcinosarcoma of the colon. An 80-year-old woman was admitted to our hospital with lower abdominal pain. Computed tomography showed a large pelvic mass, 18cm in maximal diameter, and barium enema and colonoscopy both showed a type-2 tumor in the sigmoid colon. We performed Hartmann's procedure with resection of the ileocolic segment. Immunohistochemical stains of the resected specimen revealed that most of the tumor consisted of spindle cell sarcoma with neural and muscle differentiation, while only the superficial area of an ulcerated lesion contained adenocarcinoma positive for carcinoembryonic antigen. The patient died of a fast-growing recurrent pelvic tumor 6 months postoperatively. Our experience of this case and our review of eight other cases in the English literature indicate that wide resection provides the best chance of cure, but careful postoperative follow-up is essential.     

Mechanical property changes in sapphire by nickel ion implantation and their dependence on implantation temperature

Sapphire plates, cut parallel to an {0001} plane, have been implanted with 300 keV nickel ions to doses ranging from 5×10¹² to 1×10¹⁷ Ni cm^–2 at specimen temperatures of 100, 300 and 523 K, in order to investigate the effect of implantation temperature on the mechanical property changes in sapphire caused by ion implantation. The measured changes in surface hardness, surface fracture toughness and bulk flexural strength were found to depend strongly on the implantation temperature, and were largely correlated with the residual surface compressive stress measured by using a cantilever beam technique. The surface amorphization that occurred only by the implantation at 100 K and at doses larger than 2×10s15 Ni cm^–2 reduced the hardness to 0.6 relative to the value of the unimplanted sapphire, and considerably increased the surface plasticity. Furthermore, the amorphization was found to involve a large volume expansion of 30% and to change drastically the apparent shape and size of a Knoop indentation flaw made prior to implantation. This effect was suggested to reduce stress concentrations at surface flaws and hence to increase the flexural strength.     

Supramolecular Nanofibers from Collagen-Mimetic Peptides Bearing Various Aromatic Groups at N-Termini via Hierarchical Self-Assembly

Self-assembly of artificial peptides has been widely studied for constructing nanostructured materials, with numerous potential applications in the nanobiotechnology field. Herein, we report the synthesis and hierarchical self-assembly of collagen-mimetic peptides (CMPs) bearing various aromatic groups at the N-termini, including 2-naphthyl, 1-naphtyl, anthracenyl, and pyrenyl groups, into nanofibers. The CMPs (R-(GPO)_n: n > 4) formed a triple helix structure in water at 4 °C, as confirmed via CD analyses, and their conformations were more stable with increasing hydrophobicity of the terminal aromatic group and peptide chain length. The resulting pre-organized triple helical CMPs showed diverse self-assembly into highly ordered nanofibers, reflecting their slight differences in hydrophobic/hydrophilic balance and configuration of aromatic templates. TEM analysis demonstrated that 2Np-CMP_n (n = 6 and 7) and Py-CMP₆ provided well-developed natural collagen-like nanofibers and An-CMP_n (n = 5–7) self-assembled into rod-like micelle fibers. On the other hand, 2Np-CMP₅ and 1Np-CMP₆ were unable to form nanofibers under the same conditions. Furthermore, the Py-CMP₆ nanofiber was found to encapsulate a guest hydrophobic molecule, Nile red, and exhibited unique emission behavior based on the specific nanostructure. In addition to the ability of CMPs to bind small molecules, their controlled self-assembly enables their versatile utilization in drug delivery and wavelength-conversion nanomaterials.     

Effects of magnetic field and hydrostatic pressure on martensitic transformation

Effects of magnetic field and hydrostatic pressure on martensitic transformations in some ferrous and nonferrous alloys have been studied. The studies clarified the effects of magnetic field and hydrostatic pressure on martensitic transformation start temperature, magnetoelastic martensitic transformation, morphology of martensites and transformation kinetics of athermal and isothermal transformations. That is, transformation start temperatures of all the ferrous alloys examined increase with increasing magnetic field, but those of non-ferrous, such as Ti-Ni and Cu-Al-Ni shape memory alloys, are not affected. On the other hand, transformation start temperature decreases with increasing hydrostatic pressure in some ferrous alloys, but increases in Cu-Al-Ni alloys. The magnetic field and hydrostatic pressure dependences of the martensitic start temperature are in good agreement with those calculated by the equations proposed by our group. In the work on the Fe-Ni-Co-Ti alloy, we found that magnetoelastic martensitic transformation appear. In addition, several martensite plates grow nearly parallel to the direction of applied magnetic field in the specimen of an Fe-Ni alloy single crystal. Moreover, we found that the isothermal process in an Fe-Ni-Mn alloy changes to the athermal one under magnetic field and the athermal process changes to the isothermal one under hydrostatic pressure. Based on the facts, a phenomenological theory is constructed, which unifies the two transformation processes.     

New catalytic functions of Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys in the conversions of methanol

Pd and Pt supported on ZnO, Ga₂O₃ and In₂O₃ exhibit high catalytic performance for the steam reforming of methanol, CH₃OH+H₂OCO₂+3HH₂, and the dehydrogenation of methanol to HCOOCH₃, 2CH₃OHHCOOCH₃+2HH₂. Combined results with temperature-programmed reduction (TPR) and XRD method revealed that Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys were produced upon reduction. Over the catalysts having the alloy phase, the reactions proceeded selectively, whereas the catalysts having metallic phase exhibited poor selectivities.