Cost-benefit analysis of power system reliability: two utility casestudies

There is an emerging recognition that utility investments and other decisions that affect electric service reliability should be explicitly evaluated on the basis of their cost and benefit implications. A cost-benefit approach that quantifies the reliability benefits of alternatives in terms of the reduction in costs resulting from unserved energy enables the evaluation of generation and transmission capacity additions on a consistent, economic basis. This approach has been applied to two utility case studies. In a case study for Pacific Gas and Electric Company, it was used to evaluate three options for maintaining reliability in a major load center-two involving local generation, and the third, a new 230 kV transmission connection. In a case study for Duke Power Company, the approach was used to evaluate alternative designs for proposed additions to a transmission station. This paper describes the methodology and presents the two utility studies     

Savings in relearning: II. On the formation of behavior-based trait associations and inferences.

Five experiments based on Carlston and Skowronski's (1994) relearning paradigm suggest that people spontaneously derive trait knowledge about actors from behaviors but that this knowledge may reflect either explicit trait inference processes or implicit actor–trait associations. Experiments 1 and 2 found that inference-instructed and control Ss showed equivalent savings in subsequent efforts to learn actor–trait pairs but not when instructed Ss initially inferred the wrong trait. Experiment 3 showed that savings were equivalent for stimuli from different sources, and Experiment 4 showed that savings effects persisted even when the target was only incidentally associated with a stimulus behavior. Finally, Experiment 5 suggests that after several days, even explicit trait inferences can become inaccessible to intentional retrieval, although the earlier experiments show that they continue to exert an implicit effect on learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Site and parameters of microstimulation: evidence for independent effects on the properties of saccades evoked from the primate superior colliculus

1. Microstimulation is used to investigate how activity in the superior colliculus (SC) contributes to determining the properties of primate saccadic eye movements. The site of collicular stimulation, the duration of the stimulation train, and the frequency of the stimulation train are each varied to examine the relative contributions of the locus, duration, and level of collicular activity to determining saccade amplitude, direction, duration, and velocity. 2. For any given site of stimulation, a relationship between movement amplitude and train duration can be demonstrated. Movement amplitude is a monotonically increasing, but saturating, function of increasing train duration. The size of the largest movement is dictated by the site of stimulation. Within the range over which amplitude can be modulated, movement offset is linked to the offset of the stimulation train. As a result, each decrement or increment in train duration produces a corresponding decrement or increment in movement duration. 3. The peak velocity of an evoked movement is influenced by the frequency of stimulation; a higher frequency of stimulation produces a movement of higher velocity. 4. The effects of train duration and frequency can be traded to produce movements that have comparable amplitudes but different dynamic characteristics; high-velocity movements of short duration and low-velocity movements of long duration can be produced by stimulating with high-frequency, short-duration, and low-frequency, long-duration trains, respectively. Across stimulation frequencies, the amplitude of an evoked movement is best related to the total number of pulses in the stimulation train. 5. Because it is possible to compensate for reduced velocity by increasing the duration of the stimulation train, the same site-specific maximum amplitude can be attained with different frequencies of stimulation. 6. Small, but significant, changes in movement direction occur as a result of varying train duration or train frequency. 7. The latency to movement onset (i.e., interval from stimulation onset to movement onset) depends upon the frequency of stimulation. A higher frequency of stimulation produces a movement of shorter latency. 8. These data demonstrate that both the site of stimulation and the parameters of stimulation contribute to determining the properties of a movement evoked from the primate SC. In doing so, they contradict the results of early microstimulation studies that suggest that the properties of eye movements evoked from the primate SC are determined solely by the site of stimulation. The findings conflict with the traditional view of collicular function that suggests that the collicular motor representation is purely anatomic. Rather, these data support a revised view whereby the locus, duration, and level of collicular activity contribute to determining the properties of a primate saccadic eye movement. According to this view, independent information relating to desired displacement and saccade velocity are extracted from the spatiotemporal profile of collicular activity.     

Effects of Particle Size of Bulk Drug and food on the Bioavailability of U-78875 in Dogs

The effects of particle size and food on the absolute bioavailability of U-78875 in dogs after oral administration of either a suspension or tablet dosage form were investigated. A reduction of particle size caused a significant increase in bioavailability along with an increase in dissolution rate. Additionally, both suspension and tablet dosage forms administered after food caused an increase in bioavailability. Thus, to accelerate drug dissolution, a reduction of U-78875 particle size from the unmilled state is important for the optimization of formulation compositions. To increase the bioavailability of U-78875, postprandial dosing should be considered.     

Antimicrobial effect of combinations of EDTA-Tris and amikacin or neomycin on the microorganisms associated with otitis externa in dogs

Combinations of EDTA-Tris and two aminoglycoside antibiotics (amikacin and neomycin) were tested for synergistic activities against the microorganisms associated with otitis externa in dogs and for the solutions' stability over time. Synergistic activity was observed when EDTA-Tris plus amikacin and EDTA-Tris plus neomycin were tested against Staphylococcus intermedius, Proteus mirabilis, Pseudomonas aeruginosa, and Escherichia coli, but not against Candida albicans. Stability studies over a 3-month period indicated that the test solutions were stable at room temperature and that their antimicrobial activity was maintained.     

The Danish Twin Apartment Study – Part II: Mathematical modeling of the relative strength of sources of indoor air pollution

Abstract This study deals with the modeling of air pollution in apartments from laboratory measurements of source strengths, using formaldehyde and Total Volatile Organic Compounds (TVOCs) as model pollutants. The sources in two test apartments were grouped into two: building-related sources and occupant-related sources. The measured source strengths and ventilation rates were used for the prediction of concentrations expected in the apartments. These predictions were compared to measurements in the apartment over 12 months. The conclusions were that the model predictions based on emission rates measured in the laboratory can be used to predict the long-term concentration of the two model pollutants in the apartments. Considering the measured differences in ventilation between the apartments, an occupant emission rate of between 0.2 and 0.3 mg/h/kg body weight could be estimated. Based on previous suggested limits of acceptable exposures of humans to VOCs, an acceptable average emission rate of VOCs from building materials in general was estimated to be about 30 (μ/m²/h. The modeling showed that during the first 200 days, building materials dominated the emissions. After this, sources relating to the occupants dominated. On average about half of the VOC pollution originated from the building materials.     

Current collecting efficiency of micro tubular SOFCs

In this study, current collecting efficiency of the micro tubular solid oxide fuel cell (SOFC) was estimated to determine optimum size of the micro tubular SOFC. Two models for collecting current from single terminal (ST) and double terminal (DT) of anode tube were proposed and used to calculate the current collecting efficiency as functions of anode thickness, tube length and operating temperature. It was shown that design of the cell geometry and current correcting method are significantly important to achieve high performance micro tubular SOFC stacks. The efficiency loss estimated from the DT model was about 2–4-fold lower than those of obtained from the ST model. The DT model was shown to be more effective for higher operating temperature and the tube length.     

Adsorption of urea,creatinine, and uric acid from three solution types using spherical activated carbon and its recyclability

In this paper, we propose that the urinary toxins from the wastewater be adsorbed on an adsorbent such as spherical activated carbon and the latter be regenerated by subjecting it to high temperatures to recycle activated carbon and also to recycle the water used in dialysis. We studied the adsorption of artificial waste dialysate, which is a mixed solution of urea, creatinine, and uric acid, and the separate solutions for each of these and found that their extents of adsorption onto the spherical activated carbon material were nearly identical. The amount of adsorption was approximately 1.4 mg·g^-1 for urea, 18 mg·g^-1 for creatinine, and 20 mg·g^-1 for uric acid. The urea, creatinine, and uric acid adsorbed onto the spherical activated carbon decomposed on heat treatment at 500℃, and the adsorption capacity of the spherical activated carbon was regenerated. Our study successfully demonstrated that the spherical activated carbon can be recycled in the waste dialysate treatment process.     

Determination of hydroperoxides and structures by high-performance liquid chromatography with post-column detection with diphenyl-1-pyrenylphosphine

A high-performance liquid chromatographic method, using post-column detection with diphenyl-1-pyrenyl-phosphine (DPPP), was developed for the quantitative and qualitative determination of isomeric lipid hydroperoxides (OOH). The OOH eluted from a normal-phase column were passed through a photodiode array detector and then mixed with DPPP solution in a reaction coil heated at 80°C. DPPP oxide formed by the reaction with OOH was determined by monitoring the fluorescence intensity at 380 nm and excitation at 352 nm. The conjugated diene OOH (13-cis, trans- and 9-cis, trans-OOH) and nonconjugated OOH (12-cis-trans- and 10-cis, trans-OOH) from photosensitized oxidation of methyl linoleate were determined in a molar ratio of 31∶29∶19∶21, respectively. However, only the two conjugated hydroperoxides were detected by ultraviolet absorption at 234 nm. Further applications were carried out for the determination of OOH of methyl oleate and methyl linolenate. This method proved to be useful for the determination of the OOH containing both conjugated and nonconjugated diene structures.     

Studies on miscibility in homopolymer/ random copolymer blends by equation of state theory

The miscibility of poly(methyl methacrylate) (PMMA) and styrene-acrylonitrile random copolymers (SAN) blends was investigated on the basis of the Flory—Orwoll—Vrij equation of state theory. To obtain the equation of state parameters (P*, V*_sp, T*: characteristic parameters), the pressure—volume—temperature (PVT) behaviour was measured for PMMA and a series of SANs with various acrylonitrile contents. The exchange energy parameter X_ij was also calculated by fitting the theory to some phase diagrams of PMMA/SAN blends. The Flory—Huggins interaction parameter χ was separated into two contributions based on the equation of state theory for mixtures: the exchange energy term χ_inter and the free volume term χ_free. Both the temperature and copolymer composition dependences of χ_inter and χ_free were estimated by calculations using the equation of state parameters. There exists a region in which χ_inter is negative, leading to a miscibility window in PMMA/SAN blends. However, the immiscibility at high temperatures in the blends cannot be explained only by χ_inter; it is caused by the free volume contribution, χ_free. The miscibility window behaviour in PMMA/SAN blends may be explained within the framework of the equation of state theory.