Wasserabsorptionseigenschaften natürlicher polyionenkomplexe

As the cationic component of natural polymer polyionic complexes, polysaccharide chitosan or polypeptide polylysine, and as the anionic component, polysaccharide carboxymethyl cellulose (=CMC) or polypeptide poly(glutamic acid) (PGA) were used. The degree of chitosan/CMC or polylysine/PGA complex film swelling was minimum, when the amounts of the cationic and anionic groups in these polymers were balanced at 1 : 1 ratio. On the other hand, the degree of chitosan/PGA film swelling was minimum at the ratio with excess of PGA which is a linear flexible chain. Comparing the enthalpies estimated by DSC analysis, it was suggested that the larger quantity of water in the form of nonfreezable bound water was absorbed in the complex films with polysaccharide which is a chain of ring structure. Further, the compressive moduli of swollen complex films were high, when the complex consisted of polysaccharide components.     

Thermomechanical behavior of Ti-Ni shape memory alloy films deposited by DC magnetron sputtering

In this study, thermomechanical properties of titanium-nickel (Ti-Ni) shape memory alloy (SMA) films are investigated in order to derive constitutive relations. Ti-Ni SMA films, deposited by DC magnetron sputtering under controlled film composition, are characterized by uniaxial tensile tests. At room temperature (R.T.), Ti-Ni films having Ti contents less than 50 at% exhibit superelastic behavior, and those having Ti contents greater than 50 at% exhibit shape memory behavior. However, the Ni—53.2 at% Ti film fractured at a tensile strain of 0.8% because of an increase in brittleness with increasing Ti content. At elevated temperatures, Ti-Ni films having Ti contents of 50.2 to 52.6 at% undergo phase change from martensite to austenite. The Young's modulus of the Ti-Ni films depends on temperature at each phase, regardless of film composition. Film composition does, however, affect the measured material constants b_A, b_M, c_A, and c_M. Stress-strain curves calculated from the constructed constitutive equation closely agree with those obtained from tensile tests, for both the martensite and austenite phases. The constitutive equations are expected to find great utility in the design of Ti-Ni film-actuated microelectromechanical systems (MEMS).     

DC‐linked hybrid generation system with an energy storage device including photovoltaic generation and gas engine cogeneration for residential houses

For the past few years, hybrid generation systems including solar panel and gas cogeneration have been used for residential houses. Solar panels can generate electronic power at daytime but not at night. But the power consumption of residential houses usually peaks in the evening. The gas engine cogeneration system can generate electronic power without such a restriction, and it also can generate heat power to warm up a house or to produce hot water. In this paper we propose a solar panel and gas engine cogeneration hybrid system with an energy storage device, combined by a DC bus. If a blackout occurs, the system still can supply electronic power for special house loads. We propose a control scheme for the system related to the charging level of the energy storage device and the voltage of the utility grid, which can be applied to both grid‐connected and standalone operation. Finally, we report experiments designed to demonstrate system operation and calculations for loss estimation. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 182(4): 29–46, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ).DOI 10.1002/eej.22321     

Collagen and elastin synthesis by desmoid tumor in vitro

In order to characterize human desmoid tumors in vitro, the production of collagen and elastin and the expression of collagen types alpha1(I), alpha1(III) and transforming growth factor (TGF)-beta1 mRNA were investigated in six desmoid tumors; five derived from familial adenomatous polyposis patients and one from a sporadic case. The proportion of collagen production to total protein production was determined by 3H-imino acid incorporation, an indicator of collagen synthesis, using high-performance liquid chromatography (HPLC). The proportion of collagen production to total protein production was much higher in all six desmoid tumors compared with human skin fibroblasts (HSF). Quantitatively, the rate of elastin synthesis in desmoid tumor cells monitored by valine-proline peptide was also significantly higher than in HSF. Pro-alpha1(I) collagen mRNA was highly expressed in both desmoid tumors and HSF at approximately the same level, whereas pro-alpha1(III) collagen mRNA was more abundant in some of the desmoid tumors than the normal skin fibroblastic cell lines. Tumor growth factor-beta1 mRNA, which is believed to stimulate collagen synthesis, was expressed in both desmoid tumors and HSF to the same extent. These results demonstrate the increased formation of collagen and elastin in desmoid tumors in vitro and suggest that the increased synthesis of elastin rather than of collagen and TGF-beta1 may be involved in increased fibrogenesis by desmoid tumors.     

Integration of GaAs m.e.s.f.e.t.s and Gunn elements in a 4 bit-gate device

A GaAs m.e.s.f.e.t. and a Schottky electrode-triggered Gunn element have been integrated into a single device which operated as a negative logic inhibitor. A monolithic device of four such inhibitors, connected in cascade, was operated in a stable manner, with a signal delay per gate as small as 40 ps.     

Transferred-electron negative-resistance amplifier

It has experimentally been shown that the travelling domain oscillations in an n type GaAs bulk element can be suppressed by applying externally a large microwave-signal electric field. A computer calculation indicates a possibility of amplifying the signal when the element mounted in a stripline is subject to such a relatively large microwave signal.     

Novel structure of GaAs-based interdigital-gated HEMT plasma devices for solid-state THz wave amplifier

Theoretical analysis of potential distribution in the interdigital-gated high electron mobility transistor (HEMT) plasma wave device was carried out. The dc I–V characteristics of capacitively coupled interdigital structure showed that uniformity of electric field under the interdigital gates was improved compared to the dc-connected interdigital gate structure. Admittance measurements of capacitively coupled interdigital gate structure in the microwave region of 10–40 GHz showed the conductance modulation by drain–source voltage. These results indicate the existence of plasma wave interactions.     

Realization of an extremely low reflectance surface based on InP porous nanostructures for application to photoelectrochemical solar cells

Extremely low reflectance was obtained from InP porous nanostructures in UV, visible, and near-infrared ranges. Porous samples were electrochemically prepared on which 130-nm-diameter nanopores were formed in a straight, vertical direction and were laterally separated by 50-nm-thick InP nanowalls. The reflectance strongly depended on the surface morphology. The lowest reflectance of 0.1% in the visible light range was obtained after the irregular top layer had been completely removed. Superior photoelectrochemical properties were obtained on the InP porous structures due to two unique features: the large surface area inside pores, and the large photon absorption enhanced on the low reflectance surface.     

Effects of winding connections on characteristics of a five‐phase stepping motor

A method for calculating the single‐step response of five‐phase hybrid stepping motors is obtained. The effects of winding connecting methods—(1) star‐bipolar SB, (2) pentagon PD, and (3) new pentagon NP—on the single‐step response are investigated. By application of the above calculation method, the continuous rotating characteristics are studied. It is found that the maximum slewing pulse rate of NP is higher than that of SB and PD connections, and that the variation of the rotor speed at high speed with the SB and PD connections is larger than that with the NP connection. The effects of the current waveform on the oscillation characteristics and relations between the current waveform and the winding connections are investigated. © 2001 Scripta Technica, Electr Eng Jpn, 136(1): 47–56, 2001     

Non-destructive testing

Takashi Nakai and Toshinari Tanaka of the Forestry and Forest Products Research Institute in Japan present the results of tests, using the easy handling and reasonable cost technique of fundamental vibration frequency measurement, on larger than usual cross-sections. Modulus of elasticity measurements showed this method to have high possibilities for stress grading, overcoming the size limitations of existing commercial equipment at the saw mill or lumber yard. This paper was first presented at CIB Working Commission W18a in Vancouver in September 1988.