Intramolecular triplet energy migration in poly(2-vinylnaphthalene) and poly(naphthylalkyl methacrylate)s in solid solution: Effects of side chain length

Summary The effect of side chain length on intramolecular triplet energy migration of naphthalene containing polymers was investigated by a delayed fluorescence (DF) spectroscopy for the solid solution of the polymers. The degree of triplet energy migration depends strongly on whether the chromophores are directly attached to the main chain or not.     

Temperature and pressure effects on supercritical CO2 extraction of tomato seed oil

Tomato seed oil was extracted with supercritical carbon dioxide in a semibatch-flow extractor within the temperature range 313–343 K and the pressure range 10.8–24.5MPa. The extraction rates increased with pressure, but decreased with temperature increase because of the variation in solvent density and resultant differences in oil solubility. The fatty acid composition of the extracted oil was similar to that of soybean oil.     

Prolonged exposure to intravesical foreign body induces a giant calculus with attendant renal dysfunction

A 31-year-old man came to our hospital complaining of severe voiding pain. He had inserted a fishing line made of nylon into his urethra at the age of eighteen, which was unable to be taken out and had been left there for 13 years. Preoperative ultrasonogram showed severe bilateral hydronephrosis and the serum BUN and creatinine level were as high as 45.2 mg/dl and 4.8 mg/dl, respectively. A huge bladder stone was demonstrated in X-ray film, the patient was admitted and vesicolithotomy was performed. The size of the stone was 10.5 x 7.5 x 7.5 cm and the weight was 360 grams. The fishing line was found inside the stone and the length was over 3 meters. The serum BUN and creatinine level after the operation were still high as 28.4 mg/dl and 4.1 mg/dl, respectively, and they did not improve even after six months following.     

High-performance polymer alloys of polybenzoxazine and bismaleimide

Two series of high-performance polymer alloys were prepared by mixing typical benzoxine monomers, 3-phenyl-3,4-dihydro-2H-1,3-benzoxazine (P-a) or 6,6-(1-methylethyliden)-bis-(3,4-dihydro-3-phenyl-2H-1,3-benzoxazine) (B-a), with a typical bismaleimide, 4,4-bismaleimidodiphenyl methane by various ratios followed by thermal treatment up to 240 °C. DSC and IR of the alloys were examined to follow the curing reaction. These analyses showed that the obtained polymer alloys are AB co-cross-linked polymer networks through the formation of ether linkage between the hydroxyl group of polybenoxazine and the double bond of bismaleimide. Viscoelastic analysis and softening temperature measurement revealed that the polymer alloys have much higher glass transition temperatures than those of each homopolymer. The thermal stability also increased with the increase of bismaleimide content as evidenced by TGA.     

Antitumor activity of 1 M tegafur-0.4 M 5-chloro-2,4-dihydroxypyridine-1 M potassium oxonate (S-1) against human colon carcinoma orthotopically implanted into nude rats

The purpose of this study was to establish a nude rat orthotopic (organ-specific) human colorectal cancer model as an in vivo secondary screen for general evaluation of new anticancer agents against colorectal cancer and to evaluate practically the antitumor activity of 1 M tegafur-0.4 M 5-chloro-2,4-dihydroxypyridine-1 M potassium oxonate (S-1), a new p.o. fluoropyrimidine, in comparison to 1 M tegafur-4 M uracil [(UFT) effective on colorectal tumor in clinical]. After implantation of KM12C, a human colorectal cancer cell line, into the subserosal layer of the colon as a single-cell suspension, extensive local tumor growth and invasion to both the mucosal and the serosal sides were observed in all rats. Metastatic foci were also formed in both lymph nodes and lungs following local tumor growth in all of them. Using this method, an equitoxic dose of S-1 (15 mg/kg/day) and UFT (30 mg/kg/day) was administered p.o. for 14 consecutive days from 7 days after tumor cell implantation. S-1 showed a higher tumor growth inhibition than UFT did [S-1, 57% (significantly different from the tumor weight of the untreated group at P < 0.05) and UFT, 18% (P > 0.05)]. When both drugs were administered to nude rats bearing KM12C injected into the cecal wall for 28 consecutive days at equitoxic doses, the mean survival in the S-1 group was 16 days longer than that in the untreated group (P < 0.01) but that in the UFT group was only 8 days longer (P > 0.05). After the administration of an equitoxic dose of both drugs, S-1 gave the higher levels than UFT in various pharmacokinetic parameters as follows: area under the curve 0-24 h of 5-fluorouracil in plasma (3.5-fold), area under the curve 0-24 h of 5-fluorouracil incorporated into RNA in the tumor (1.3-fold), and thymidylate synthase inhibition rate (percentage) in the tumor (about 20%). Collectively, these findings suggested that this orthotopic human colorectal tumor model in nude rats is useful to evaluate the clinical therapeutic efficacy of drugs or therapies for colorectal cancer, and that S-1 had a higher therapeutic effect on human colorectal tumor than UFT did.     

A novel quarter‐wave retardation film for improving viewing angle properties in time‐sequential stereoscopic 3D‐LCDs

We have successfully developed a quarter‐wave retardation film (QWF) for wide viewing angle 3D liquid crystal displays (3D‐LCDs) that provides high luminance, low crosstalk, low color change, and low head‐tilt‐angle dependency. It was found that the out‐of‐plane retardation (Rth) of the QWF in the LCD needs to be close to 0 nm in order to improve the 3D display properties at an off‐axis position and that the in‐plane retardation (Re) needs to be adjusted from 120 to 130 nm to achieve low color change with head tilting. We adopted a coating process for making our QWF because of its potential for retardation control. 3D‐LCDs with this QWF whose Rth was nearly zero had high performance and allowed off‐axis other than on‐axis.     

Properties of indium oxide/tin oxide multilayered films prepared by ion-beam sputtering

The preparation and characterization of indium oxide (InO _x )/tin oxide (SnO _y ) multilayered films deposited by ion-beam sputtering are described and compared with indium tin oxide (ITO) films. The structure and the optoelectrical properties of the films are studied in relation to the layered structures and the post-deposition annealing. Low-angle X-ray diffraction analysis showed that most films retained the regular layered structures even after annealing at 500° C for 16 h. As an example, we obtained a resistivity of 6×10^–4 cm and a transparency of about 85% in the visible range at a thickness of 110 nm in a multilayered film of InO _x (2.0 nm)/SnO _y (0.2 nm)×50 pairs when annealed at 300° C for 0.5 h in air. Hall coefficient measurements showed that this film had a mobility of 17 cm² V^–1 sec^–1 and a carrier concentration (electron density) of 5×10²⁰ cm^–3.     

Modification of mesophase pitch by blending Part 2 Modification of mesophase pitch fibre precursor with thermoresisting polyphenyleneoxide (PPO)

Polyphenyleneoxide was blended in amounts of 5 or 10 wt% into petroleum-derived mesophase pitch to reinforce the pitch fibre before the oxidative stabilization to achieve better handling properties. Although polyphenyleneoxide was fusible but hardly soluble in the mesophase pitch even at a spinning temperature of 350° C, blended pitch could be smoothly spun into pitch fibre 10m diameter, as could the parent pitch. Fibrous polyphenyleneoxide of less than 1m diameter was homogeneously dispersed in the pitch fibre, being arranged along the fibre axis. Such fibrous polyp henyleneoxide reinforced the pitch fibre considerably. The fibrous substances at the centre of the fibre disappeared in the carbonized fibre at 1300° C after oxidation at 250° C, although some short ones were observed in the skin region of the fibre, suggesting that polyphenyleneoxide was co-carbonized to be assimilated with mesophase pitch at the centre of the fibre, where the effects of oxidation may be rather limited. The oxidation reactivity and its mechanical strength after carbonization were slightly lower in comparison with those of the parent mesophase pitch.