Optimization of Pathogen Capture in Flowing Fluids with Magnetic Nanoparticles

Magnetic nanoparticles have been employed to capture pathogens for many biological applications; however, optimal particle sizes have been determined empirically in specific capturing protocols. Here, a theoretical model that simulates capture of bacteria is described and used to calculate bacterial collision frequencies and magnetophoretic properties for a range of particle sizes. The model predicts that particles with a diameter of 460 nm should produce optimal separation of bacteria in buffer flowing at 1 L h⁻¹. Validating the predictive power of the model, Staphylococcus aureus is separated from buffer and blood flowing through magnetic capture devices using six different sizes of magnetic particles. Experimental magnetic separation in buffer conditions confirms that particles with a diameter closest to the predicted optimal particle size provide the most effective capture. Modeling the capturing process in plasma and blood by introducing empirical constants (c_e), which integrate the interfering effects of biological components on the binding kinetics of magnetic beads to bacteria, smaller beads with 50 nm diameters are predicted that exhibit maximum magnetic separation of bacteria from blood and experimentally validated this trend. The predictive power of the model suggests its utility for the future design of magnetic separation for diagnostic and therapeutic applications.     

Investigations of surface characterization of silicone rubber due to tracking phenomena under a.c. and d.c. voltages

In the present work, tracking phenomena has been studied with silicone rubber material under the a.c. and d.c. voltages following IEC-587 standards. The surface condition of the tracked zone was analysed using wide angle X-ray diffraction (WAXD) and thermogravimetric differential thermal analysis (TG-DTA) studies. The tracking time was different for a.c. and d.c. voltages.     

Accommodation of a D-Phe residue into a right-handed 3(10)-helix: structure of Boc-D-Phe-(Aib)4-Gly-L-Leu-(Aib)2-OMe, an analogue of the amino terminal segment of antiamoebins and emerimicins

Recently an unstable trinucleotide CTG repeat, located within the 3' untranslated region of a gene on 19q13.3 was discovered in kindreds with myotonic dystrophy (DM). The age-of-onset/severity of DM shows a good correlation with CTG repeat size, and pedigrees and data reported to date have shown a striking trend toward amplification of the size of the CTG repeat during transmission from parent to child. The amplification has been accepted as the biological explanation for anticipation in the clinical severity observed in many families with DM. In this paper we report on 3 families where CTG amplification decreased during transmission from parent to child. In one case there was a gene conversion event, while in the remaining 2 there was a simpler reduction in the size of the repeat length. The changes appear to have been accompanied by a reduction in clinical severity in the child when compared to the parent. These observations are discussed in terms of their clinical implications and the biases that may exist in much of the reported data.     

One-step oxidation of cyclohexane to adipic acid

Liquid-phase oxidation of cyclohexane with Co(III) catalyst and gaseous oxygen was found to be influenced by reaction temperature, catalyst concentration and the duration. Maximum adipic acid product selectivity (77%) with about 85% cyclohexane conversion was attained at 100°C using catalyst: cyclohexane molar ratio 0·08. Under these conditions more than 80% cyclohexane was converted in the first hour, although selectivity to adipic acid continued to increase for the next 5 h. Cyclohexyl acetate and cyclohexyl monoadipate were identified as important intermediates. This study supports the mechanism proposed by Schultz, J. G. D. and Opchenko, A., J. Org. Chem., 38 (21) (1973) 3729.     

Transport properties in a mixed inorganic ion exchanger—zirconium phosphomolybdate—in comparison to its single salt counterparts

Amorphous inorganic ion exchangers zirconium phosphate, zirconium molybdate and zirconium phosphomolybdate have been prepared and characterized by elemental analysis, TGA, FTIR and surface area measurements. The protonic conductivity in these materials were determined at various temperatures and compared. It was found that the mixed material zirconium phosphomolybdate showed maximum conductivity at all temperatures.     

Wear and Wear Transition in Silicon Carbide Ceramics during Sliding

Wear and wear transition in silicon carbide ceramics during sliding have been investigated. Three different microstructures, i.e., solid-state-sintered silicon carbide, liquidphase-sintered silicon carbide, and a liquid-phase-sintered SiC-TiB₂ composite, were produced by hot pressing. Wear data and examinations of worn surfaces showed that the wear behavior of these silicon carbide ceramics was significantly different. In the solid-state-sintered silicon carbide, the wear occurred by a grooving process. In the liqudphase-sintered silicon carbide and composite, on the other hand, an abrupt transition in the wear mechanism from an initial grooving process to a grain pullout process occurred during the test. The transition occurred significantly earlier in the composite than in the carbide. The different wear behavior in these silicon carbide ceramics is discussed in relation to the grain or interphase boundary strength.     

Variational density matrix approach to the temperature-dependent elementary excitation spectrum of two-dimensional liquid4He

Using the variational density matrix method, we obtain a temperature-dependent elementary excitation spectrum for two-dimensional liquid⁴He. For more precise results, we use a Jastrow-Feenberg-type trial wave function and include the contribution of elementary diagrams within the hypernetted chain approximation. The behavior of the excitation spectrum as a function of the temperature and density in two dimensions is similar to that of the bulk system, but has a smaller roton minimum. The roton minimum of the excitation spectrum decreases with increasing temperature and increases with increasing density at low densities but decreases at large densities. The results agree well with Monte Carlo calculations and are closer than pevious theories to experimental measurements of⁴He film adsorbed on substrates.     

k-Nearest neighbor query processing algorithm for cloaking regions towards user privacy protection in location-based services

Due to the advancement of wireless internet and mobile positioning technology, the application of location-based services (LBSs) has become popular for mobile users. Since users have to send their exact locations to obtain the service, it may lead to several privacy threats. To solve this problem, a cloaking method has been proposed to blur users’ exact locations into a cloaked spatial region with a required privacy threshold (k). With the cloaked region, an LBS server can carry out a k-nearest neighbor (k-NN) search algorithm. Some recent studies have proposed methods to search k-nearest POIs while protecting a user’s privacy. However, they have at least one major problem, such as inefficiency on query processing or low precision of retrieved result. To resolve these problems, in this paper, we propose a novel k-NN query processing algorithm for a cloaking region to satisfy both requirements of fast query processing time and high precision of the retrieved result. To achieve fast query processing time, we propose a new pruning technique based on a 2D-coodinate scheme. In addition, we make use of a Voronoi diagram for retrieving the nearest POIs efficiently. To satisfy the requirement of high precision of the retrieved result, we guarantee that our k-NN query processing algorithm always contains the exact set of k nearest neighbors. Our performance analysis shows that our algorithm achieves better performance in terms of query processing time and the number of candidate POIs compared with other algorithms.     

Material Design for 3D Multifunctional Hydrogel Structure Preparation

Hydrogels are recognized as one of the most promising materials for e-skin devices because of their unique applicable functionalities such as flexibility, stretchability, biocompatibility, and conductivity. Beyond the excellent sensing functionalities, the e-skin devices further need to secure a target-oriented 3D structure to be applied onto various body parts having complex 3D shapes. However, most e-skin devices are still fabricated in simple 2D film-type devices, and it is an intriguing issue to fabricate complex 3D e-skin devices resembling target body parts via 3D printing. Here, a material design guideline is provided to prepare multifunctional hydrogels and their target-oriented 3D structures based on extrusion-based 3D printing. The material design parameters to realize target-oriented 3D structures via 3D printing are systematically derived from the correlation between material design of hydrogels and their gelation characteristics, rheological properties, and 3D printing processability for extrusion-based 3D printing. Based on the suggested material design window, ion conductive self-healable hydrogels are designed and successfully applied to extrusion-based 3D printing to realize various 3D shapes.