Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

Molecular Targeted Therapy for the Bone Loss Secondary to Pyogenic Spondylodiscitis Using Medications for Osteoporosis: A Literature Review

Pyogenic spondylodiscitis can cause severe osteolytic and destructive lesions in the spine. Elderly or immunocompromised individuals are particularly susceptible to infectious diseases; specifically, infections in the spine can impair the ability of the spine to support the trunk, causing patients to be bedridden, which can also severely affect the physical condition of patients. Although treatments for osteoporosis have been well studied, treatments for bone loss secondary to infection remain to be elucidated because they have pathological manifestations that are similar to but distinct from those of osteoporosis. Recently, we encountered a patient with severely osteolytic pyogenic spondylodiscitis who was treated with romosozumab and exhibited enhanced bone formation. Romosozumab stimulated canonical Wnt/β-catenin signaling, causing robust bone formation and the inhibition of bone resorption, which exceeded the bone loss secondary to infection. Bone loss due to infections involves the suppression of osteoblastogenesis by osteoblast apoptosis, which is induced by the nuclear factor-κB and mitogen-activated protein kinase pathways, and osteoclastogenesis with the receptor activator of the nuclear factor-κB ligand-receptor combination and subsequent activation of the nuclear factor of activated T cells cytoplasmic 1 and c-Fos. In this study, we review and discuss the molecular mechanisms of bone loss secondary to infection and analyze the efficacy of the medications for osteoporosis, focusing on romosozumab, teriparatide, denosumab, and bisphosphonates, in treating this pathological condition.     

Radiophotoluminescence phenomenon in copper-doped aluminoborosilicate glass

Radiophotoluminescence phenomena have been widely investigated on various types of materials for dosimetry applications. We report that an aluminoborosilicate glass containing 0.005 mol% copper exhibits intense photoluminescence in the visible region induced by X-ray and γ-ray irradiation. The luminescence is assigned to the 3d⁹4s¹ → 3d¹⁰ transition of Cu⁺. The proportionality of the intensity of the induced photoluminescence to the irradiation dose was confirmed up to 0.5 kGy using ⁶⁰Co γ-ray irradiation. Based on the spectroscopic results, a potential mechanism was proposed for the enhancement of the photoluminescence. The exposure to the ionizing radiation generates electron-hole pairs in the glass, and the electrons are subsequently captured by the Cu²⁺ ions, which are converted to Cu⁺ and emit the luminescence. For the glass containing 0.01 mol% copper, the pronounced enhancement of the photoluminescence was not observed because the reverse reaction, ie, the capture of the holes by the Cu⁺ ions, becomes prominent. The photoluminescence induced by the irradiation was stably observed for the glasses kept at room temperature and even for the glasses heat-treated at 150°C. However, the induced photoluminescence could be eliminated by the heat treatment at a temperature at 500°C, and the glass returned to the initial pre-irradiation state. The Cu-doped aluminoborosilicate glass is a potential candidate for use in dosimetry applications.     

A highly transparent and thermally stable copolymer of 1‐adamantyl methacrylate and styrene

Thermal and optical properties of copolymers of 1‐adamantyl methacrylate (AdMA) and styrene (St) prepared by free radical polymerization in the bulk are investigated. The copolymer forms an azeotrope when the composition is AdMA/St = 55/45 mol%. The glass transition temperature and decomposition temperature of the azeotropic copolymer are 170 and ca 340 °C, respectively. The refractive index increases nonlinearly with St content from 1.522 to 1.591. The light scattering loss at 633 nm is 28.1 dB km^?1, which is less than half of that of polystyrene. The total optical loss including molecular vibrational absorption, which is evaluated using a copolymer‐based optical fiber, is 292–645 dB km^?1 at 500–700 nm. These values correspond to transmittances of 86–93% for a 1 m optical path length. © 2014 Society of Chemical Industry     

Mechanisms of orientational and photoelastic birefringence generation of methacrylates for the design of zero–zero‐birefringence polymers

The intrinsic birefringence Δn⁰ and photoelastic coefficient C of poly(methyl methacrylate), poly(2,2,2‐trifluroethyl methacrylate), poly(phenyl methacrylate), and poly(2,2,3,3,3‐pentafluorophenyl methacrylate) were determined. We categorized these methacrylate polymers into four birefringence‐types, even though their molecular structures differed only by the substituents on the side chains. Based on the results of Δn⁰ and C, novel polymers that exhibit neither orientational nor photoelastic birefringence, i.e., zero–zero‐birefringence polymers, were designed and synthesized by quaternary copolymerization system. Furthermore, we confirmed that the mechanisms of orientational birefringence and photoelastic birefringence generation were different in these methacrylate polymers. The conformation of the repeat unit of the polymers was nearly constant during the generation of orientational birefringence. In contrast, the conformation of the repeat unit of the polymers changed during the generation of photoelastic birefringence in the glassy state. These findings demonstrated the reasonability of evaluating orientational and photoelastic birefringence separately, as well as the adequacy of the classification of polymers into four birefringence‐types. Given these results and the fact that zero–zero‐birefringence polymers could be prepared successfully by four‐birefringence type monomers, we demonstrated the reasonability of the method for designing the zero–zero‐birefringence polymers. POLYM. ENG. SCI., 55:1330–1338, 2015. © 2015 Society of Plastics Engineers     

CD46 (membrane cofactor protein of complement, measles virus receptor): structural and functional divergence among species (review)

OBJECT: In this retrospective study, the authors analyzed the frequency, anatomical distribution, and appearance of traumatic brain lesions in 42 patients in a posttraumatic persistent vegetative state. METHODS: Cerebral magnetic resonance (MR) imaging was used to detect the number of lesions, which ranged from as few as five to as many as 19, with a mean of 11 lesions. In all 42 cases there was evidence on MR imaging of diffuse axonal injury, and injury to the corpus callosum was detected in all patients. The second most common area of diffuse axonal injury involved the dorsolateral aspect of the rostral brainstem (74% of patients). In addition, 65% of these patients exhibited white matter injury in the corona radiata and the frontal and temporal lobes. Lesions to the basal ganglia or thalamus were seen in 52% and 40% of patients, respectively. Magnetic resonance imaging showed some evidence of cortical contusion in 48% of patients in this study; the frontal and temporal lobes were most frequently involved. Injury to the parahippocampal gyrus was detected in 45% of patients; in this subgroup there was an 80% incidence of contralateral peduncular lesions in the midbrain. The most common pattern of injury (74% in this series) was the combination of focal lesions of the corpus callosum and the dorsolateral brainstem. In patients with no evidence of diffuse axonal injury in the upper brainstem (26% in this series), callosal lesions were most often associated with basal ganglia lesions. Lesions of the corona radiata and lobar white matter were equally distributed in patients with or without dorsolateral brainstem injury. Moreover, cortical contusions and thalamic, parahippocampal, and cerebral peduncular lesions were also similarly distributed in both groups. CONCLUSIONS: The data indicate that diffuse axonal injury may be the major form of primary brain damage in the posttraumatic persistent vegetative state. In addition, the authors demonstrated in this study that MR imaging, in conjunction with a precise clinical correlation, may provide useful supportive information for the accurate diagnosis of a persistent vegetative state after traumatic brain injury.     

Successful treatment by direct hemoperfusion of coma possibly resulting from mitochondrial dysfunction in acute valproate intoxication

PURPOSE: We evaluated the efficacy of direct hemoperfusion (DHP) for treatment of acute valproate (VPA) intoxication and speculate on the biochemical perturbations that suggest a mechanism of coma induced by VPA overdose. PATIENT AND METHODS: The comatose patient was hospitalized approximately 6 h after ingesting 18 g VPA. DHP, with 200 g activated charcoal, was performed for 6 h. The plasma concentrations of VPA and Glasgow coma scale scores after admission were estimated. Before and after DHP, urine samples were tested in serial fashion for VPA metabolites, organic acids, and acyl carnitine esters of fatty acids. RESULTS: Plasma VPA was efficiently adsorbed on activated charcoal. The patient's plasma concentration of VPA decreased from 471 microg/ml (2,830 microM) to 45 microg/ml (270 microM), at which point the patient became alert. The half-life (t1/2) of VPA was calculated as 4.4 h before DHP and as 1.8 h during DHP. Before DHP, lactate and VPA-glucuronide markedly increased in urine samples, but beta-keto-VPA, a major mitochondrial metabolite, was not detected. Urinary excretion of carnitine esters of medium chain (C8-C10) dicarboxylic acids was increased. After DHP, lactate and VPA-glucuronide decreased, but a significant amount of beta-keto-VPA was demonstrated. Carnitine esters of medium chain dicarboxylic acids were decreased. CONCLUSIONS: DHP with activated charcoal was effective treatment for the patient with acute VPA intoxication and coma. The onset of coma may have been related to inhibition of beta-oxidation in the mitochondria, which was reversible by elimination of plasma VPA by DHP.     

Generation of gas bubbles in microflow using micropipette with ultrasound

Ultrasound was applied to a micropipette micromixer to improve dispersion of gas and liquid in a microchannel. Flow visualization using a high-speed camera was performed to examine the effect of ultrasonic irradiation on bubble generation in the microchannel. Basically, nitrogen gas was injected using a (0.5 µm ID) glass micropipette into ethanol flowing in a rectangular (100 µm×200 µm) microchannel on polydimethylsiloxane (PDMS). Gas and liquid flow rates were regulated using mass flow controllers. At aflow condition that is typical of bubbly flow, ultrasound was transmitted into the microchannel using a piezo-electric (PZT) transducer over a range of operating voltages (2 to 200 Vp-p) and frequencies (50 to 60 kHz). Images captured during the action of the PZT transducer indicate that bubble formation is influenced by ultrasound. When subjected to ultrasound above 50 Vp-p and at the resonant frequency of the PZT transducer, bubbles formed that were smaller and closer together, signifying enhanced shearing of the gas at the micropipette tip by the liquid. The observation of gas slugs occurring sooner might be attributed to the coalescence of gas bubbles that became closely spaced.     

Characteristics of thermally expanded core fiber

Thermally expanded core (TEC) fiber is expected to reduce fiber-to-fiber and fiber-to-laser diode connection loss. This paper describes the characteristics of TEC fiber theoretically and experimentally. We reveal theoretically that when fabricating TEC fiber the mode field diameter (MFD) is enlarged more effectively by increasing the heating temperature rather than the heating time. In the 1300-1600°C temperature range with heating times between 0 and 60 min, it is necessary to control the temperature accurately so that no deviation from the target temperature is more than ±30°C. This is in order to ensure that any connection loss caused by MFD mismatch is less than 0.1 dB. We show experimentally that the propagation loss of TEC fiber is dependent on the heating region and wavelength by using a micro burner with a propane/oxygen flame. Based on the relationship between the loss characteristics and the expanded MFD, we suggest a method for nondestructively measuring the MFD in TEC fibers