A wafer level monitoring method for plasma-charging damage usingantenna PMOSFET test structure

A novel monitoring method for plasma-charging damage is proposed. This method performs a quick and accurate evaluation using antenna PMOSFET. It was found that not only hot-carrier (HC) lifetime but transistor parameters such as initial gate current and substrate current were changed according to the degree of plasma-charging damage. However, the present work suggests that monitoring the shift of drain current after a few seconds of HC stress is a more accurate method to indicate plasma-charging damage. The monitoring method using the present test structure is demonstrated to be useful for realizing highly reliable devices     

Stabilization of inter-area and/or oscillatory modes in large-scale power system by voltage impedance power system (VIPS) apparatus based on decentralized control scheme

New technologies such as power electronics have made it possible to change continuously the impedance of a power system not only to control power flow but also to enhance stability. A power system incorporating a variable impedance apparatus such as a variable series capacitor (VSrC) and high-speed phase shifter (HSPS) is called VIPS (Variable Impedance Power System) by the authors. This paper proposes a novel control method of VIPS apparatus such as VSrC and HSPS installed at an interconnecting point for stabilizing inter-area unstable and/or oscillatory modes. The proposed design method of the control system is a kind of hierarchical decentralized control method of a large-scale power system based on a Lyapunov function. Under the proposed control scheme, each subsystem can be stabilized independently by local controllers such as AVR, speed governor and PSS, and then the whole interconnected system can be stabilized by VIPS apparatus taking into account interactions between subsystems. The effectiveness and robustness of the VIPS apparatus control are shown by numerical examples with model systems including a large-scale power system.     

Functioning survival rate of fixtures and superstructures of osseointegrated implants: ten years of progress in Tokyo Dental College Hospital (second report)

Endoglucanase production was measured in culture filtrates of four species of Saccobolus growing in media containing glucose or crystalline cellulose as the only carbon sources. Enzyme activity was four to seven times higher in the presence of cellulose than glucose. S. saccoboloides showed maximal growth and enzyme production. The extracellular proteins secreted during growth on cellulose were separated by polyacrylamide gel electrophoresis and stained for proteins. A zymogram technique was used to visualize bands with endoglucanase activity. The four species showed different protein and isoenzyme patterns.     

Detection of Target Embedded in Sea Clutter by Means of Millimeter Wave Radar

Sea clutter was measured using a millimeter wave radar with a frequency of 34.86GHz and pulse length of 30ns. A car carrier ship target was embedded in sea clutter. It has been discovered that target pulse-to-pulse fluctuations obey a Weibull distribution and sea clutter obey a Rayleigh distribution. We obtained target to clutter ratio improvement of 23.8dB by applying the cell average LOG/CFAR techniques. The computer simulation has been made to evaluate the detection probability and the false alarm probability. The simulation result was in good agreement with the observed data.     

OSP-P200最新开放式数控系统

上世纪90年代末，受到以国际互联网为代表的信息技术革命的影响，制造业为了构筑新的生产方法，开始引入各种信息技术工具。这是为了满足消费者品种多样化和个性化的需求，以大量生产为主的产品导向模式（Product Out）向多品种小批量的市场导向模式（Marketin）的变化为目的，充分利用信息技术和设计制造知识，更加快速和低价地向市场提供各种高附加价值产品。     

Pb1−x Bi x /Bi/Pb1−x Bi x Josephson junction

A superconductor/semimetal/superconductor (S/SM/S) Josephson junction has been developed. We have used an alloy of Pb_1–x Bi _x (0x 0.6) as the superconductor and Bi as the semimetal. By irradiating at X-band microwave of 10 GHz, Shapiro steps were observed for various bismuth barrier thicknesses inÅ and bismuth weight ratiosx. Finally, we obtained the empirical relationship for barrier thickness, below which microwaves could be detected for various bismuth weight ratiosx at the temperature of 4.2 K.     

Synthesis of tetramethyl-p-silphenylenesiloxanedimethylsiloxane triblock copolymer by employing living anionic polymerization

Dimethylsiloxane-tetramethyl-p-silphenylenesiloxane-dimethylsiloxane (DMS-TMPS-DMS) triblock copolymer was synthesized by employing living anionic polymerization of hexamethylcyclotrisiloxane (D₃). Two synthetic methods were carried out for the polymerization. One of those methods was the anionic polymerization of D₃ initiated at the silanolate anion which was prepared from the terminal hydroxyl group of silanol-terminated TMPS prepolymer by reaction with n-butyllithium (method 1). The other was the coupling reaction of vinyl-terminated TMPS prepolymer with hydrosilyl-terminated DMS prepolymer obtained from the anionic polymerization of D₃ by using diphenylmethylsilanolate anion as initiator (method 2). In method 1, DMS contents of the copolymers ranged from 25.8 to 72.5 wt% and the values agreed with the ratio of D₃ to TMPS prepolymer. The weight-average molecular weights ranged from 1.36×10⁴ to 19.4×10⁴ and were close to the predicted values calculated from the $\text{M}\text{?}{}_{\mathrm{v}}$ of the TMPS prepolymer and the amount of D₃ added. In the case of method 2, weight-average molecular weights ranged from 19.5×10⁴ to 24.2×10⁴. The high molecular weight copolymer could thus be obtained by method 2. Intrinsic viscosity values of the triblock copolymers agreed with calculated values obtained by considering the copolymer as a binary mixture of these homopolymers. Differential scanning calorimetry and thermogravimetry were carried out on the triblock copolymers. The equilibrium melting temperatures of each of the copolymers were very close to that of poly-TMPS (160°C). The glass transition temperature and heat of fusion were decreased as the DMS content was increased. The thermogravimetric curves for the copolymers indicated that the thermal stability of the triblock copolymer was intermediate between the DMS and TMPS homopolymers.     

Effect of inorganic salt on adsorption of sodium alkyl sulfates and fatty acid sodium salts from aqueous solution onto ion exchange resins

The adsorption isotherms of sodium salts of alkyl sulfonic acid and fatty acid with various carbon numbers onto ion exchange resins were measured in the absence and in the presence of sodium chloride in aqueous solutions. In the absence of the inorganic salt, the amount of adsorption remarkably increased with an increase in the length of alkyl groups in the adsorbates. Furthermore, the amount of adsorption apparently decreased with addition of sodium chloride into the solutions and almost reached a constant value at high concentrations of NaCl. This behavior strongly suggested that the electrostatic interaction on the adsorption decreased with increasing salt concentration and that the effect of hydrophobic interaction seems to play an important role on adsorption.     

Decolorization and mineralization of Oolong tea polyphenols in colored soft drink wastewater by photo Fenton reaction

The decolorization and the mineralization of the colored soft drink wastewater including Oolong tea polyphenols by the photo Fenton reaction have been investigated. The decolorization of the colored soft drink wastewater including Oolong tea polyphenols by the photo Fenton reaction could be divided into 3 phases. Just after H2O2 was added to the solution, the color of the solution immediately increased from absorbance of 0.247 to 0.711 at the wavelength of 400 nm, which was defined as the 1st phase. Subsequently the significant decolorization by the photo Fenton reaction occurred at the 2nd phase. Finally, complete decolorization (the color attributed to the color of Fe3+) could be achieved in 180 min at the 3rd phase. The instantaneous and considerable color increase at the 1st phase could be attributed to the formation of intermediate colored compounds like quinones and soluble iron complexes produced by the Fenton reaction. About 95% mineralization of model colored soft drink wastewater with 229 mg L(-1) initial TOC concentration was achieved after 165 min.