Tunneling Conductance Dependence of the Tunneling Spectra in Bi2Sr2CaCu2O8

We have measured the tunneling spectra in Bi₂Sr₂CaCu₂O₈ with a scanning tunneling microscope(STM) at various tip-sample distances by changing the tunneling conductance in a controlled manner. When the tunneling conductance is increased from 1×10^–9 to 1×10^–5 S, the spectra do not show changes in particular. However, the gap value decreases steeply and the asymmetric back ground density of states turns inverted V-shaped one above 6×10^–4 S. The changes in the tunneling spectra at the high tunneling conductances are explained by the enhancement of the local carrier density induced by the pressure that the STM tip applied to the sample.     

Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.     

A case of inflammatory pseudotumor of the liver causing elevated serum CA19-9 levels

Inflammatory pseudotumor of the liver is a rare lesion characterized by proliferating fibrovascular tissue admixed with inflammatory cells. A 50-yr-old Japanese man was hospitalized because of upper abdominal pain and high fever. Computed tomography revealed a poorly demarcated, low density mass in the left lobe of the liver, and abnormal laboratory findings included WBC 9340/mm3, CRP 10.5 mg/dl, and marked elevation of CA19-9 to 1167.9 U/ml. Endoscopic retrograde cholangiography showed irregularity of the intrahepatic bile duct of the left lateral segment, and the lateral segmental branches of the portal vein were not visualized on the venous phase of abdominal angiography. Ultrasound-guided liver biopsy was performed, but malignant disease, including intrahepatic cholangiocarcinoma, could not be completely ruled out. The patient underwent left hepatic lobectomy with lymph node dissection. Histopathological examination yielded a definitive diagnosis of inflammatory pseudotumor. The lesion was immunohistochemically stained for CA19-9 by the ABC method, and the biliary epithelium in severely inflamed portal canals was found to be positive. The markedly elevated preoperative level of CA 19-9 decreased to almost within the normal range and the patient remains well 2 yr 9 months after surgery, without any complications.     

Improvement of a neural network-based motion generator with bimanual coordination for upper limb prosthesis

We propose to redesign a neural network used as a motion generator with bimanual coordination for upper limb prosthesis in order to improve its learning capability. We assumed that the wearer of the prosthesis was a unilateral amputee. In our previous work, we proposed a prosthesis control system using a neural network that learned bimanual coordination in order to implement smooth motion with both hands. However, the previously proposed system has the problem that a neural network cannot generate the desired motion of the prosthesis in special cases. The reason is that the motion generator calculates the desired posture of the prosthesis from the current posture of the healthy arm only, regardless of the current posture of the prosthesis. We propose to use the current posture of both the healthy arm and the prosthesis as neural network inputs in order to solve this problem. In this article, we show that a single neural network whose input was the current posture of both arms could learn the relationships of the coordinated motions of holding boxes of different sizes, and the newly proposed system can calculate the desired motion of the prosthesis in special cases through computer simulations.     

Basic constructs of the SIM operating system

The basic constructs of SIMPOS (Sequential Inference Machine Programming and Operating System) are explained. SIMPOS is an operating system for a super-personal computer (SIM), based on logic programming language (a modified Prolog, called KL0). Our design principle is simplicity both in concept and structure. The entire system will be constructed using these basic constructs.     

Organosulfonic acid-functionalized mesoporous composites based on natural rubber and hexagonal mesoporous silica

This study is the first report on synthesis, characterization and catalytic application of propylsulfonic acid-functionalized mesoporous composites based on natural rubber (NR) and hexagonal mesoporous silica (HMS). In comparison with propylsulfonic acid-functionalized HMS (HMS-SO₃H), a series of NR/HMS-SO₃H composites were prepared via an in situ sol–gel process using tetrahydrofuran as the synthesis media. Tetraethylorthosilicate as the silica source, was simultaneously condensed with 3-mercaptopropyltrimethoxysilane in a solution of NR followed by oxidation with hydrogen peroxide to achieve the mesoporous composites containing propylsulfonic acid groups. Fourier-transform infrared spectroscopy and ²⁹Si MAS nuclear magnetic resonance spectroscopy results verified that the silica surfaces of the NR/HMS-SO₃H composites were functionalized with propylsulfonic acid groups and covered with NR molecules. After the incorporation of NR and organo-functional group into HMS, the hexagonal mesostructure remained intact concomitantly with an increased framework wall thickness and unit cell size, as evidenced by the X-ray powder diffraction analysis. Scanning electron microscopy analysis indicated a high interparticle porosity of NR/HMS-SO₃H composites. The textural properties of NR/HMS-SO₃H were affected by the amount of MPTMS loading to a smaller extent than that of HMS-SO₃H. NR/HMS-SO₃H exhibited higher hydrophobicity than HMS-SO₃H, as revealed by H₂O adsorption–desorption measurements. Moreover, the NR/HMS-SO₃H catalysts possessed a superior specific activity to HMS-SO₃H in the esterification of lauric acid with ethanol, resulting in a higher conversion level.     

A novel anionic surfactant templating route for synthesizing mesoporous silica with unique structure

Anionic surfactants are used in greater volume than any other surfactants because of their highly potent detergency and low cost of manufacture. However, they have not been used as templates for synthesizing mesoporous silica. Here we show a templating route for preparing mesoporous silicas based on self-assembly of anionic surfactants and inorganic precursors. We use aminosilane or quaternized aminosilane as co-structure-directing agent (CSDA), which is different from previous pathways. The alkoxysilane site of CSDA is co-condensed with inorganic precursors; the ammonium site of CSDA, attached to silicon atoms incorporated into the wall, electrostatically interacts with the anionic surfactants to produce well-ordered anionic-surfactant-templated mesoporous silicas (AMS). These have new structures with periodic modulations as well as two-dimensional hexagonal and lamellar phases. The periodic modulations may be caused by the coexistence of micelles that differ in size or curvature, possibly owing to local chirality. These mesoporous silicas provide a new family of mesoporous materials as well as shedding light on the structural behaviour of anionic surfactants.     

ADAPTIVE CONTROL DESIGN FOR NONLINEARLY PARAMETERIZED SYSTEMS WITH A TRIANGULAR STRUCTURE

A novel adaptive backstepping design for a class of nonlinearly parameterized systems with a triangular structure is proposed. Under the Lipschitz condition with respect to unknown parameters of the system, an effective adaptive controller is designed without the requirement on the compactness of the unknown parametric set. Especially, the proposed adaptive control enables the advantage of “tuning function concept”, which results in only one estimation law for the unknown parameters. Our simulation with induction motor model particularly shows the viability of the obtained results.