排序方式: 共有12条查询结果,搜索用时 15 毫秒
1.
2.
织物用热红外透明粘合剂的研究 总被引:4,自引:0,他引:4
三元乙丙橡胶在8~14μm波段无强吸收基团,可以作为很好的热红外透明粘合剂的主要材料。为克服其强度低、粘结力小和透气性差等缺点,进行环氧化改性及透气性改进,对红外发射率和织物各项性能进行了测试。结果表明,改性后的乙丙橡胶可以作为织物用伪装涂料粘合剂,并值得做进一步的研究。 相似文献
3.
4.
环境友好材料特辑可降解高分子材料 总被引:4,自引:0,他引:4
综述了可降解高分子材料的研究动态、重点研究内容、评价方法及应用前景,指出了可降解高分子材料存在的问题以及发展方向. 相似文献
5.
介绍了聚合物阵列波导光栅(AWG)复用器的基本原理,进而用Al掩模制做聚合物AWG光波导。结果表明:AWG器件的制做工艺,Al掩模技术明显优于厚胶掩模技术。用这种技术制备的器件,其结构指标与理论设计相符合而且波导在1.55μm处实现了单模传输。 相似文献
6.
织物用热红外伪装涂料在8~14 μm波段红外发射率的研究 总被引:12,自引:1,他引:12
从金属颜料铝粉的含量,粒子形貌和尺寸,粘合剂的选用和改性等4个方面对织物用热红外伪装涂料在8-14μm波段的红外发射率进行了研究,结果表明,当铝粉质量百分数大于20%时,涂层的发射率不再下降;片状粒子和尺寸较大的粒子对发射率降低的作用较强;以三元乙丙橡胶为基料获得的改性粘合剂在3-14μm波段具有较好的红外透明性。 相似文献
7.
A novel polymer-on-silicon Mach-Zehnder interferometer optical filter and the performance analysis based on spectrum-periodized theory 下载免费PDF全文
The analysis on the traditional asymmetric Mach-Zehnder interferometer (AMZI) optical filter based on two 3 dB directional couplers (DCs) shows that by adding an additional nonlinear phase generated by phase-generating coupler (PGC) to the original phase difference of the AMZI, its non-periodic frequency response can be modified, and a strictly periodic spectrum can be obtained. A novel structure of the AMZI filter using two PGCs before and after the AMZI region is proposed. With the needed free spectrum range (FSR) of 20 nm, the design and optimization of the device are performed using polymer SU-8 as the core and PMMA-GMA as the buffer. Though the insertion loss (IL) gets larger than that of the traditional AMZI filter, the FSR is nearly uniform as the expected period of 20 nm. 相似文献
8.
9.
有机硅防雾耐磨透明涂层的固化分析及性能研究 总被引:2,自引:0,他引:2
对有机硅防雾耐磨涂料的固化反应过程用差热式扫描量热仪(DSC)进行分析,再用FTIR在位跟踪固化反应过程中特征官能团吸收峰的变化.结果表明,有机硅胶体在140℃左右固化,胶体中缔合羟基间脱水缩合速率很高,羟基脱水程度与固化温度有关,温度越高,达平衡时羟基的浓度越低,羟基浓度变化最大是在100~130℃,由此确定最佳固化反应温度为120℃,反应时间为1h.把涂料分别涂覆在聚碳酸酯(PC)片材、聚酯(PET)薄膜、聚酯(PET)不干胶薄膜上,所得涂层的防雾性、耐磨性、透明性、粘接性、抗破裂性优良,表面均一平整,铅笔硬度可达3H-4H,与水的接触角为10°左右. 相似文献
10.
环氧树脂型面模具材料的研究及应用 总被引:2,自引:1,他引:1
研制的JP系列模具材料,是以环氧树脂为基材,添加填料,助剂等组成的复合材料,可作为浇铸快速成型模具用的材料,讨论了该材料的组成和性能之间的关系。 相似文献