Isothermal Gas Forming of Mg Alloy AZ31 Sheet

There have been reports on sheet forming of Mg alloy in industry via the punch and die method;this paper is probably the first formal one for studying the sheet formability of AZ31 employing pressurized gas to press the sheet into a female die cavity at various elevated temperatures.The results indicate it is feasible to form a rectangular box via pressurized gas from extruded sheets of 0.5 and 1.7 mm thick.The formed box has 1:2 depth over width ratio,which should be large enough when dealing with realistic industrial sheet forming parts.Presently,forming a sheet of 0.5 mm thick is considered a technical challenge by industry,and it is conquered as demonstrated in this paper.Gas forming technique applied to Mg alloy is unprecedented and shows potential for industrial utilization.     

Centrifugal Casting of High Speed Steel/Nodular Cast Iron Compound Roll Collar

Ｈｉｇｈ ｓｐｅｅｄｓｔｅｅｌ (ＨＳＳ) ,ｉｓｃｈａｒａｃｔｅｒｉｚｅｄｂｙｅｘ ｃｅｌｌｅｎｔｈａｒｄｎｅｓｓ ,ｗｅａｒｒｅｓｉｓｔａｎｃｅ ,ａｎｄ ｇｏｏｄｒｅｄｈａｒｄｎｅｓｓ .Ｒｅｃｅｎｔｌｙ ,ＨＳＳｉｓａｐｐｌｉｅｄｔｏｍａｎｕｆａｃｔｕｒｅｈｏｔｒｏｌｌｉｎｇｒｏｌｌｓｔｏｐｒｏｄｕｃｅｓｔｒｉｐｓｏｆｇｏｏｄｓｈａｐｅａｎｄｓｍａｌｌｃｒｏｗｎｗｉｔｈｅｘｔｅｎｄｅｄｒｏｌｌｓｅｒｖｉｃｅｌｉｆｅ[1,2 ] .ＴｈｅＨＳＳｉｓａｐｐｌｉｅｄｔｏｍａｎｕｆａｃｔｕｒｅｒｏｌｌｃｏｌｌａｒｆｏｒ…     

Structure and Magnetic Properties of LaCo_(13-X)M_X Intermetallic Compounds

ＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＬａＣｏ＿（１３－Ｘ）Ｍ＿ＸＩｎｔｅｒｍｅｔａｌｌｉｃＣｏｍｐｏｕｎｄｓＷＵＪｉａｎＭｉｎ；ＬＩＦｅｎｇ；ＴＡＩＬｉＣｈｉａｎｄＺＨＥＭＧＱｕｎＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰ...     

Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor

~~Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor     

CREEP CRACK PROPAGATION IN CONVENTIONAL CAST AND DIRECTIONALLY SOLIDIFIED SUPERALLOY RENE 80

The creep crack propagation in superalloy René80 of two different microstructures,i.e.,equiaxed grain structure by conventional casting and columnar grain by directionalsolidification,was investigated under static load at 1123 K.The creep crack growth rate,da/dt,seems to be correlated with the stress intensity factor,K.The creep crack growth ratein the directionally solidified alloy is lower than that in the conventional cast alloy,owing tothe elimination of transverse grain boundaries.The effect of microstructure on creep crackpropagation has also been discussed.     

院校教育效果与基层部队用人机制关系问题探讨

军事人才来源于院校而用于基层部队,院校是培养人才的基地,影响其教育效果的因素众多,其中基层部队用人机制是其因素之一.从院校教育的基本职能出发,分析了基层部队用人机制所存在的问题及其对院校教育效果的影响,提出了诸多解决这一问题的基本措施.     

Incoherent scatter spectra due to HF heating in the low ionosphere region

The electron velocity distribution function and the incoherent scatter spectra during ionospheric heating in low ionosphere region are presented with consideration of the elastic collision between electrons and neural particles and the excitation of rotation energy level. The effects of pump frequency and electric fields on the spectra are discussed. With the increase of electric field, the non-Maxwellian feature is enhanced, and with the increase of heating frequency, the non-Maxwellian feature is weakened. The non-Maxwellian factor will bring a large error in ionosphere parameters, which must be considered in the inversion. Supported by the National Natural Science Foundation of China (Grant No. 40310223), the National Key Laboratory of Electromagnetic Environment (LEME), and National Key Technologies R&D Program of China (Grant No. 2006BAB18B06)     

Orientation angle workspaces of planar serial three-link manipulators

This paper presents a classification on the workspaces of planar serial three-link manipulators, that is, position workspace and orientation angle workspace. Position workspace indicates the region reached by the reference point on the end-effector. Orientation angle workspace indicates a set of angle ranges by which the end-effector can reach with certain orientation for every point in the reachable position workspace. By introducing a virtual equivalent mechanism, reachable position workspace can be divided into several Grashof intervals and non-Grashof intervals. The calculation equations of orientation angle workspace are deduced in three situations according to the relationships among four link lengths in the virtual four-bar chain. Three examples are given for three kinds of relationship of link lengths. The orientation angle workspace of extended groups, that is, two of the three link lengths equal, and the orientation angle workspace when the reference point on the end-effector moves along a non-radial direction are also discussed. A program is developed to calculate orientation angle workspaces and output variation curves of orientation angle workspace and key data within the position workspace. The approach and program in this paper can be used for fast calculation and identification of the variation rule of the orientation angle workspace of any given planar serial three-link manipulator on the basis of its link parameters, and for the design of a highly dexterous serial manipulator with proposed link relations. Supported by the Natural Science Foundation of Shanxi Province (Grant No. 20041070)     

Coupling System for Food Wastes Anaerobic Digestion and Polyhydroxyalkanoates Production with Ralstonia eutropha

A new technology was developed to couple the anaerobic digestion of food wastes with production of polyhydroxyalkanoates (PHAs). Acetic, propionic, butyric and lactic acids were produced during food wastes anaerobic digestion and their concentrations reached 5.5, 1.8, 27.4 and 32.7 g/L, respectively under appropriate digestion conditions. The fermentative acids were transferred through a dialysis membrane to an air-lift reactor for PHA synthesis by Ralstonia eutropha. Dry cell concentration and PHA content reached 22.7 g/L and 72.6%, respectively. The obtained PHA was a copolymer of b-hydroxybutyrate (HB) and b-hydroxyvalerate (HV) with 2.8% (mole ratio) of HV units in polymer.