Preparation and properties of novel polyurethane insulating coatings based on glycerin‐terminated urethane prepolymers and blocked isocyanate

Novel polyurethane insulating coatings were prepared from the reaction of glycerin‐terminated polyurethane prepolymers (GPUPs) and a blocked isocyanate curing agent (BIC). The GPUPs were prepared from the reaction of one equivalent of polycaprolactone polyol (CAPA 210) with an excess amount of 4,4′‐methylene bis(phenyl isocyanate) (MDI) and subsequent reaction of the NCO‐terminated polyurethane with glycerin. The BIC was prepared from the reaction of trimethylol propane (TMP), toluene diisocyanate (TDI) and N‐methylaniline (NMA). The polyols and curing agent were characterized by conventional methods while the curing condition was optimized via gel content measurements. The curing kinetics of the polyurethane coating were investigated and the kinetic parameters derived. The crosslink densities of the samples were determined via the equilibrium swelling method, using the Flory–Rehner equation. The relationships between the crosslink density and the electrical, physical, mechanical and dynamic mechanical properties of the coatings were also studied. Copyright © 2005 Society of Chemical Industry     

Survival of rotavirus SA-11 on vegetables

Survival of rotavirus on lettuce, radishes, and carrots was studied to evaluate the potential of rotavirus transmission by vegetables irrigated with wastewater. The vegetables were contaminated with rotavirus SA-11 and stored at 4°C and room temperature in covered and uncovered containers to simulate post harvest conditions. Virus decay rates were greater on radishes and carrots than lettuce. Decay rates of rotavirus on lettuce, radish, and carrot ranged from ?0·057 to ?0·479 (log₁₀ pfu/day). Rotavirus SA-11 survived on lettuce, radish, and carrot for 25 to 30 days at 4°C but at room temperature survival was very different for the various vegetables varying from 5 to 25 days. Greatest survival was always observed on the lettuce. These data suggest that rotaviruses can survive long enough on contaminated vegetables as to be transmitted by this vehicle.     

Preparation of heavily dopedn-type Ge-Si thermoelectric alloys

Germanium-silicon alloys doped with phosphorus were prepared in vacuum by rapidly pouring the molten alloy into cooled copper moulds containing the phosphorus dopant. Without any further treatment, the ingots are milled into powder of grain size (L 5 µm) and hot pressed. It is shown that a high degree of homogenization of the alloy constituents can be obtained in the final compacts, thus eliminating the need for zone-levelled starting material. It is also shown that this work is in agreement with the plastic flow model of sintering known as the Mackenzie-Shuttleworth-McClelland model. Electrical measurements indicate that the dopant is effectively and uniformly incorporated into the alloy.     

Adiabatic quantum optimization with qudits

Most realistic solid state devices considered as qubits are not true two-state systems. If the energy separation of the upper energy levels from the lowest two levels is not large, then these upper states may affect the evolution of the ground state over time and therefore cannot be neglected. In this work, we study the effect of energy levels beyond the lowest two energy levels on adiabatic quantum optimization in a device with a double-well potential as the basic logical element. We show that the extra levels can be modeled by adding additional ancilla qubits coupled to the original logical qubits, and that the presence of upper levels has no effect on the final ground state. We also study the influence of upper energy levels on the minimum gap for a set of 8-qubit spin glass instances.     

Dynamic response of Kevlar®29/epoxy laminates under projectile impact-experimental investigation

This authors of this article investigated the dynamic response of woven Kevlar®29/epoxy laminates subjected to the impact loading. The cylindrical aluminum foam projectile and steel projectile were used to exert the impulse on the laminates. Deformation/failure modes, deflections, strain histories, and failure mechanisms were obtained and discussed. The results showed that with the high toughness of Kevlar fiber, the deformation modes of the laminates exhibited some characteristics similar to the metal panel, such as large global deformation. The failure mechanisms like matrix failure, fiber splitting, and fibrillation were observed. These micron failures led to the macroscopic delamination and fracture of the laminates.     

Metal-electroceramic bonding in PZT through the selective application of laser energy

Ferrite powder has been directly bonded to the surface of poled lead zirconate titanate (PZT-4) using direct laser sintering. The resultant cohesion between the metal and ceramic is extremely good although care must be taken with the processing in order to limit the damage inflicted upon the PZT. Four point bending suggests that the strength of the processed samples has reduced to 60 MPa as compared to 76 MPa for the unprocessed ceramic. Electrical and piezoelectric measurements shows that the laser sintering had caused mechanical damage to a depth of 550 μm and thermal damage (depoling) to a depth of 800 μm.     

面向学生的高校智能管理系统的设计与实现

随着网络技术的快速发展,高校对学生信息化的建设和管理愈加重视。高校智能管理系统是高校信息化建设的重要展现。本文针对学生日常的生活轨迹和生活信息,进行相关的数据分析和挖掘,采用Python语言和MySQL数据库技术,在Flask框架上进行改进,实现了以学习管理、健康管理和生活管理三大功能模块的轻量级Web和安卓应用,将面向学生的高校智能管理系统打造成一个集成化的平台,以提升校园管理的工作效率和提供健康安全保障。     

Manual Therapy Facilitates Homeostatic Adaptation to Bone Microstructural Declines Induced by a Rat Model of Repetitive Forceful Task

The effectiveness of manual therapy in reducing the catabolic effects of performing repetitive intensive force tasks on bones has not been reported. We examined if manual therapy could reduce radial bone microstructural declines in adult female Sprague–Dawley rats performing a 12-week high-repetition and high-force task, with or without simultaneous manual therapy to forelimbs. Additional rats were provided 6 weeks of rest after task cessation, with or without manual therapy. The control rats were untreated or received manual therapy for 12 weeks. The untreated TASK rats showed increased catabolic indices in the radius (decreased trabecular bone volume and numbers, increased osteoclasts in these trabeculae, and mid-diaphyseal cortical bone thinning) and increased serum CTX-1, TNF-α, and muscle macrophages. In contrast, the TASK rats receiving manual therapy showed increased radial bone anabolism (increased trabecular bone volume and osteoblast numbers, decreased osteoclast numbers, and increased mid-diaphyseal total area and periosteal perimeter) and increased serum TNF-α and muscle macrophages. Rest, with or without manual therapy, improved the trabecular thickness and mid-diaphyseal cortical bone attributes but not the mineral density. Thus, preventive manual therapy reduced the net radial bone catabolism by increasing osteogenesis, while rest, with or without manual therapy, was less effective.     

Subspace analysis of spatial time-frequency distribution matrices

Spatial time-frequency distributions (STFDs) have been previously introduced as the natural means to deal with source signals that are localizable in the time-frequency domain. Previous work in the area has not provided the eigenanalysis of STFD matrices, which is key to understanding their role in solving direction finding and blind source separation problems in multisensor array receivers. The aim of this paper is to examine the eigenstructure of the STFD matrices. We develop the analysis and statistical properties of the subspace estimates based on STFDs for frequency modulated (FM) sources. It is shown that improved estimates are achieved by constructing the subspaces from the time-frequency signatures of the signal arrivals rather than from the data covariance matrices, which are commonly used in conventional subspace estimation methods. This improvement is evident in a low signal-to-noise ratio (SNR) environment and in the cases of closely spaced sources. The paper considers the MUSIC technique to demonstrate the advantages of STFDs and uses it as grounds for comparison between time-frequency and conventional subspace estimates