Influence of solvents on extraction of U(Ⅵ) by N,N'-didecanoylpiperazine

Extraction behavior of N, N'-didecanoylpiperazine (DDPEZ) for U(Ⅵ)in a series of solvents from aqueous nitric acid media was investigated for the first time.The dependence of distribution ratios on the concentration of aqueous nitric acid.extractant and temperature has been discussed. The increasing sequence of extractiveability of DDPEZ is given: chloroform, carbon tetrachloride, dimethylbenzene, toluene,benzene.``     

强化计算机网络可靠性的方法研究

随着人们生活水平的不断提高,计算机的使用在人们生活占有的比例越来越大。因此,提高计算机网络的可靠性方法的研究,对于建设安全的网络环境和促进国民经济,社会经济都是非常必要的。本文就如何提高计算机网络可靠性进行探讨,从而为计算机网络可靠性设计者提供一份比较有参考价值的方案。     

基于高速摄像机的电磁电器动态特性测试及其图像处理的研究

为了研究电磁电器动态特性测试的新方法,以智能交流接触器为例拍摄了智能交流接触器的动态过程,对采集的接触器触头、铁心等动态位移图像进行处理,然后应用二进小波多层多尺度分解完成降噪处理,此外本文采用样条求导方式对运动速度进行软测量,从而获得智能交流接触器的真实动态特性,介绍了电磁电器动态特性测试装置与数据处理新方法。该研究采用非接触测试方式,进行图像拍摄与降噪处理,实现了电磁电器动态过程全面、高速与准确的测量,为加快电磁电器产品的研究开发奠定基础。     

Relationship of hydrocarbon and source-rock in Nos.3-5 tectonic belts of the Lenghu area, northern Qaidam Basin

Based on analyses of the components of crude oil hydrocarbons and carbon isotopes, the content of normal alkane de-creased from 49.00% to 20.10% when moving from the No.3 to No.5 tectonic belt of the Lenghu area of the Qaidam Basin, while cycloalkanes increased from 30.00% to 52.20% and aromatic and branch chain alkanes increased gradually as well. The maturity of sterane in crude oil is higher than that of its source-rock, which shows that the hydrocarbons were generated from a deep source-rock of high maturity around the tectonic belts of the Lenghu area. The analysis of the characteristics of carbon isotopes also shows that these isotopes of hydrocarbon compounds in the No.4 and No.5 tectonic belt are apparently heavier than those in the No.3 belt. The results of our research show that the hydrocarbons in the No.3 tectonic belt are mainly from a relatively rich sapropelic substance, while the hydrocarbons in the No.4 and No.5 tectonic belt originated mainly from organic matter of a rela-tively rich humic type substance.     

膨胀聚苯板外墙外保温工程施工质量问题分析及控制

结合工程实例,阐述了膨胀聚苯板外墙保温工程施工中的质量控制措施及控制要点.     

基于储氢合金的太阳能制冷系统理论研究

结合金属氢化物的特点,提出了一种新型太阳能吸附式制冷循环系统;具体介绍了系统结构形式,建立了系统能量转换与分析模型,并对构成系统的各部件进行了分析;根据具体算例,计算了系统各部件的效率与损失,结果表明,系统具有较好的节能效果,且系统优化应以太阳能辐射量为基准,以提高金属氢化物系统中的氢气转化率为目标进行。系统优化的另一方向在于发展与其他太阳能利用技术相结合的复合式系统。     

Fast method for SAR echo simulation of a three-dimensional ground scene

Due to huge calculation of SAR echo simulation of a three-dimensional (3D) ground scene, a fast simulation method is proposed. First, the data of a 3D ground scene are fractionally interpolated based on the Fractional Brownian Motion (FBM) model. Second, the data interpolated are divided into lots of small facets whose precision meets the simulation requirement, the backscattering coefficients of the small facets are calculated. Third, the shaded area is judged by the comparison method of overlook angles. Three parallel levels are analyzed and the kernel function is designed. Finally, the computing method of reduction adding and external thread are also utilized under the framework of GPU in order to get high efficiency. With the methods mentioned above, the imaging result of experimental DEM data verifies the validity and superiority of the proposed method.     

液压夹具夹持力对金属材料室温拉伸曲线的影响及处理

针对日常检测中金属材料室温拉伸曲线出现的异常现象,分析材料试验机液压夹具夹持力大小对金属材料室温拉伸曲线的影响情况。结果表明:液压夹具夹持力对拉伸曲线的影响不可忽视,应注意观察试样最大拉力并适时调整夹具夹持力;在判明曲线异常为液压夹具夹持力所致时,应人为处理曲线得出正确测试结果。     

基于MATLAB的热定型机PID张力控制器设计

文章介绍了热定型机的工作原理,及其定型过程中张力系统控制结构图,并以此为基础建立了张力控制系统的数学模型.基于比例积分微分(PID)控制器的原理,利用MATLAB软件设计了张力控制器,其编写的PID参数整定函数能作为MATLAB函数进行直接调用.实验和仿真结果表明:该控制器完全满足张力控制系统的性能要求,降低了超调量,提高了系统的动静态性能;同时设计简单、易于实现.