Heat transfer and pressure drop in a new type of corrugated channels

An experimental investigation of heat transfer and pressure drop from a new type of corrugated channels is presented. The investigation has been carried out for Reynolds numbers in the range of $\text{800 <}\text{Re}\text{< 5000}$ for one corrugated and one smooth channel. It is found that the heat transfer from the corrugated channel is up to 3.5 times higher than for the smooth one. The pressure drop is however large (5 – 6 times the value of a smooth channel) and it is suggested that the corrugation height and length should be altered in order to balance the increases in heat transfer and pressure drop.     

Testing for the equivalence of factor covariance and mean structures: The issue of partial measurement invariance.

Addresses issues related to partial measurement invariance using a tutorial approach based on the {lisrel} confirmatory factor analytic model. Specifically, we demonstrate procedures for (a) using "sensitivity analyses" to establish stable and substantively well-fitting baseline models, (b) determining partially invariant measurement parameters, and (c) testing for the invariance of factor covariance and mean structures, given partial measurement invariance. We also show, explicitly, the transformation of parameters from an all-X to an all-Y model specification, for purposes of testing mean structures. These procedures are illustrated with multidimensional self-concept data from low (n?=?248) and high (n?=?582) academically tracked high school adolescents. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Photochemical oxidation of fatty acid esters with and without chlorophyll

1. It has been confirmed that the principal products formed in the oxidation of methyl oleate by oxygen under a variety of conditions are predominantlytrans hydroperoxides. However no inversion of the double bond occurs in unoxidized oleate. Hence the conversion ofcis totrans double bonds and peroxide formation occur together in the same molecules.
2. The autoxidation of methyl linoleate at low temperature yields predominantlycis,trans conjugated hydroperoxides. Autoxidation at 25°C., oxidation catalyzed by visible light, or ultraviolet light and copper soap catalyzed oxidation at temperatures appreciably above 0°C., lead to the formation primarily oftrans,trans conjugated hydroperoxides. The inversion of the second double bond in this case appears to be independent of the peroxide-forming reactions.
3. The photochlorophyll oxidation of methyl linoleate leads to the formation of some unconjugated hydroperoxides, some of which containtrans double bonds.
4. Under all of the conditions employed in the present investigation, the oxidation of methyl oleate and linoleate led primarily to the formation of monomeric peroxides which retained most of the unsaturation of the parent compound.

     

EVALUATION OF A METHOD FOR MEASURING MIXING TIME USING NUMERICAL SIMULATION AND EXPERIMENTAL DATA

A method for measuring mixing performance in large-scale vessels is investigated. The method is evaluated experimentally in a pilotscale reactor and by using a model based on the three-dimensional calculation of the flow field. The method is based on injection of a tracer and measuring the concentration with several detectors at different locations. The mixing performance is measured as the decay rate of the difference between the concentration at the detectors and the final concentration.

The model predicts a strong dependence on injection point. The assumption of a first-order decay rate of the concentration deviation is more appropriate for some injection points.     

Effect of patchwise slip on fluid flow

In this paper, we show that large connected slip patches (hydrophobic patches) are a necessity to induce macroscopic slip effects of water flow in microchannels. For this purpose, the 2D fluid flow between a planar stationary surface with alternating stick and slip patches and a parallel planar surface moving with a constant relative velocity has been studied by computer simulations based on Navier–Stokes equations. A slip patch is defined as the slipping length in a 2D system or a slip area of the surface in a 3D system. The simulations reveal that the ratio (size of each slip patch)/(distance between the two parallel interfaces) has profound effect on the viscous stress on the moving surface when this ratio is around and above one. However, when the ratio is much below one, the effect of the slip patches are minor, even if the area fraction of slip patches are higher than 50 %. Obviously, the stick patches adjacent to the slip patches act as effective barriers, preventing the fluid velocity to increase near the surface with alternating stick and slip patches. The obtained results are scalable and applicable on all length scales, with an exception for narrow channels in the subnano regime, i.e. <1 nm where specific effects as the atomistic composition and the nanostructure of the wall as well as the interactions between the wall and the water molecules have an effect.     

Photocross-linking of low-density polyethylene. III. Supermolecular structure studied by SALS

The supermolecular structure of photocross-linked polyethylene (XLPE) has been studied by small-angle light scattering (SALS). The data show that the spherulitic structure of XLPE gradually deteriorates with increasing degree of cross-linking and increasing irradiation temperature from well-developed spherulites to rodlike aggregates and disordered lamellar structures. A photocross-linked sample of PE has lower crystallinity, smaller crystallites, and smaller spherulites than does the original sample. At high degrees of cross-linking, the SALS patterns show little or no spherulitic structure. Results with photocross-linked polyethylene demonstrate that the overall effect of cross-linking on the morphological structure is similar to that of an increase in molecular weight of the polymer. © 1993 John Wiley & Sons, Inc.     

Two-variable periodic perturbation of kinetic oscillations

Using one of the generic models (CO oxidation on Pt with surface-oxide formation) predicting kinetic oscillations in heterogeneous catalytic reactions, we show that the efficiency of two-variable periodic perturbations with respect to converting natural period-1 oscillations to period-l oscillations at the forcing frequency is remarkably sensitive to the kind of perturbations used. Counter-phase perturbations are much more effective compared to in-phase perturbations. The physics underlying these findings is suggestive of their applicability to many other models and/or real systems exhibiting kinetic oscillations.     

A case study of factor influencing role improvisation in crisis response teams

Common characteristics of crisis situations are ambiguous and unplanned for events. The need for improvised roles can therefore be an imperative factor for the success of an operation. The aim of this study is to deepen the understanding of the processes taking place during improvised work “as it happens”. A case study of a crisis management team at work is presented and provides an in-depth analysis of the information and communication flow of persons acting in improvised roles, including contextual factors influencing the task at hand. The analysis suggests that three main factors lay behind decreased performance by the team when some of its members were forced to take on roles for which they lacked professional training; lack of language skills, lack of domain knowledge and insufficient organizational structure of the tasks. Based on the observations from this case study, we suggest three ways of improving a team’s performance and hence resilience when forced to improvise due to lack of personnel in one or more required competence areas. These are training to take on the responsibility for tasks or roles outside ones professional area of specialization, developing formal routines for changes in roles and tasks and developing and using tools and routines for information sharing.