Experimental technique using FTIR to estimate IR optical properties at variable temperatures: application to PMDA-ODA polyimide thin films from 100 to 380 degrees C

An experimental technique is presented to measure reflectance at high sample temperature with respect to room temperature in the infrared using Fourier transform infrared fitted with a reflectometer. Sample temperature artifacts are accounted for by sequential measurements taken with the lamp source on and with the lamp source off. The sequential measurements are shown mathematically to correct for the modulation of sample and detector thermal emissions. Further, the technique is applied to a polyimide (PMDA-ODA) film on a layer of gold deposited on a thermally oxidized Si wafer. It is shown that the optical properties (index of refraction and extinction coefficient) remain relatively constant with temperature (from room temperature to 380 degrees C) in the 4000-6000 cm(-1) spectral region. The significant changes that occur with temperature are the change in thickness of the film and also the spectral properties in the 2000-4000 cm(-1) region. Also, by using a Lorentz oscillator model, it is shown that this method is able to discern that spectral features corresponding to the OH stretching bands at 3630 and 3470 cm(-1) show significant variation with increasing temperature.     

Dissolution and Solubility Behavior of Fenofibrate in Sodium Lauryl Sulfate Solutions

The solubility of fenofibrate in pH 6.8 McIlvaine buffers containing varying concentrations of sodium lauryl sulfate was determined. The dissolution behavior of fenofibrate was also examined in the same solutions with rotating disk experiments. It was observed that the enhancement in intrinsic dissolution rate was approximately 500-fold and the enhancement in solubility was approximately 2000-fold in a pH 6.8 buffer containing 2% (w/v) sodium lauryl sulfate compared to that in buffer alone. The micellar solubilization equilibrium coefficient (k*) was estimated from the solubility data and found to be 30884 ± 213 L/mol. The diffusivity for the free solute, 7.15 × 10^{? 6} cm²/s, was calculated using Schroeder's additive molal volume estimates and Hayduk-Laurie correlation. The diffusivity of the drug-loaded micelle, estimated from the experimental solubility and dissolution data and the calculated value for free solute diffusivity, was 0.86 × 10^{? 6} cm²/s. Thus, the much lower enhancement in dissolution of fenofibrate compared to its enhancement in solubility in surfactant solutions appears to be consistent with the contribution to the total transport due to enhanced micellar solubilization as well as a large decrease ( ～ 8-fold) in the diffusivity of the drug-loaded micelle.     

Dispatching rules for scheduling in assembly jobshops - Part 1

Research on jobshop scheduling has tended to concentrate on the development of dispatching rules for jobs that are independent, i.e. single-component jobs. However, in real-life situations, many jobs involve assembly operations that require scheduling of multiple components through the jobshop where both serial and parallel operations take place. In this two-part paper, we consider the problem of scheduling in assembly jobshops, i.e. jobshops that manufacture multi-level assembly jobs. The development of new and efficient dispatching rules with a view to address various measures of performance related to flowtime and staging delay of jobs is first undertaken. A new concept, called 'operation synchronization date' is introduced and made use of in the new dispatching rules. The best existing dispatching rules and the proposed dispatching rules are relatively evaluated by an exhaustive simulation study. The results indicate that the proposed rules emerge to be superior to the existing ones for most measures of performance.     

The effect of nitrogen and sulphur compounds on extreme pressure lubrication

This paper reports the synthesis of hydroxyheptadecyl-substituted-1,3,4-thiadiazoles and mercapto-1,2,4-triazoles and the evaluation of extreme pressure activity of their admixtures (0.5% and 1% w/ v) with a paraffinic oil in a four-ball test. Alloy steel bearing balls of 12.7 mm diameter were used as test specimens. All the additives exhibited good activity in reducing wear and increasing the values of mean Hertz load (MHL) and flash temperature parameter (FTP) as compared to the base fluid. The presence of p-methoxy- and p-chloro- groups in the thiadiazole and mercapto triazole rings has been found to enhance the activity of these additives. Scanning Auger Electron Spectroscopy surface studies were conducted to analyse the additive-metal interaction.     

Studies on nonlinear optical parameters of bis-chalcone derivatives doped polymer

Two bis-chalcone derivatives, 1,5-[di(4-methoxyphenyl)]penta-1,4-dien-3-one and 1,5-[di(4-chlorophenyl)]penta-1,4-dien-3-one were synthesized. Their SHG conversion efficiencies are reported to be 6.0 and 5.0 times that of urea and hyper polarizabilities are 9.9×10⁻³⁰ and 10.2×10⁻³⁰ esu, respectively. The third-order nonlinear optical properties in PMMA matrix were studied by Z-scan technique using 7 ns laser pulses at 532 nm. The nonlinear refractive index γ, nonlinear absorption coefficient β, magnitude of effective third order susceptibility χ⁽³⁾ and the coupling factor ρ have been investigated. The values obtained are of the order of 10⁻¹⁴ cm²/W, 1.2 cm/GW, 10⁻¹⁴ esu and 0.2, respectively, which are comparable with the values obtained in stilbazoleum like dyes. The experimental investigation also shows that they are very interesting optical limiting materials and their optical limiting behaviour is mainly due to two photon absorption phenomenon.     

Superparamagnetic Nanostructures for Off‐Resonance Magnetic Resonance Spectroscopic Imaging

This study proposes a new method to generate positive contrast in magnetic resonance imaging (MRI) using superparamagnetic contrast agents. Superparamagnetic nanostructures consisting of octahedron manganese ferrite nanoparticles embedded in spherical nanogels are fabricated using a bottom‐up approach. The composite nanoparticles are strongly magnetized in an external magnetic field and produce a unique NMR frequency shift in water protons, which can be demonstrated in MR spectroscopy and imaging to be different from the bulk pool. Moreover, the particles exhibit excellent colloidal stability in aqueous media and good cell biocompatibility. Hence, these particles are potentially useful as biomarkers by taking advantage of the positive contrast effects produced in MRI.     

On the Impact of Performance Faults in Modern Microprocessors

Modern microprocessors incorporate a variety of architectural features, such as branch prediction and speculative execution, which are not critical to the correctness of their operation yet are essential towards improving performance. Accordingly, while faults in the corresponding hardware may not necessarily affect functional correctness, they may, nevertheless, adversely impact performance. In this paper, we investigate quantitatively the performance impact of such faults using a superscalar, dynamically-scheduled, out-of-order, Alpha-like microprocessor, on which we execute SPEC2000 integer benchmarks. We provide extensive fault simulation-based experimental results that elucidate the various aspects of performance faults and we discuss how this information may guide the inclusion of additional hardware for performance loss recovery and yield enhancement.     

Variability of mesopause temperature derived from two independent methods using meteor radar and its comparison with SABER and EOS MLS and a collocated multi-wavelength dayglow photometer over an equatorial station,Thumba (8.5° N, 76.5° E)

Two independent methods for deriving mesopause temperature using meteor radar installed at an equatorial station, Thumba (8.5° N, 76.5° E), are discussed in this article. This meteor radar-derived mesopause temperature is then compared with two different types of spaceborne measurement, namely (i) Sounding the Atmosphere using Broadband Emission Radiometry (SABER) and (ii) the Earth Observing System Microwave Limb Sounder (EOS MLS), and a collocated multi-wavelength dayglow photometer (DGPM). The meteor radar-derived temperature is in fairly good agreement with all the three measurement techniques, with an uncertainty of ±10°. This study focuses on a detailed evaluation and inter-comparison of mesopause temperature derived from different measurement techniques. An attempt is also made to compare the suitability of these observations to study planetary waves and other oscillation activities in the mesospheric region.