Corrected Sum Rule, Generalized Virial Identity and Elementary Excitation Spectrum of Bose–Einstein Condensates at Any Trapped Atom Number

Using a corrected sum rule and a generalized virial identity, we study the analytical expression for entire modes of the collective elementary excitation spectrum in a trapped Bose–Einstein condensate at any atom number. Explicit analytical formulas for the spectrum are obtained for the harmonic traps with both spherical symmetry and axial symmetry using the gaussian approximation for the N-body ground-state wave function of the condensate. These formulas give the simple dependence of all energy levels on the atom numbers, their interaction strength and trap geometry parameters.     

中频反应溅射SiO2膜与直流溅射ITO膜的在线联镀

多数ITO透明导电玻璃生产线在实现SiO2膜与ITO膜在线联镀时，应用SiO2靶射频溅射沉积SiO2膜工艺和ITO靶直流溅射沉积ITO膜工艺，如果SiO2膜应用硅靶反应磁控溅射工艺，存在这种工艺是否可以与ITO靶直流溅射沉积ITO膜工艺在线联用以及如何实现联用的问题。作者对现有的生产线进行了改造设计、加工，做了大量实验、质谱分析和多项测试研究，成功地实现反应溅射SiO2膜与ITO膜在线联镀，做到SiO2镀膜室的工作状态的变化基本上不影响ITO镀膜室的工艺条件。     

竹坑水库大坝安全鉴定分析

在竹坑水库大坝安全鉴定中,认真分析了该工程存在的主要问题,并针对大坝的结构稳定和渗流稳定作了详细的分析论证.     

Rapid pyrolysis of brown coal and oil shale

A brown coal, peat and oil shale were subjected to a rapid pyrolysis process and medium-heat-value gases together with tar were collected. The char residue was of high activity and suitable for gasification to create a two-stage gasification system. The coal-tar is used for manufacturing liquid fuels and chemicals.     

Fast method for SAR echo simulation of a three-dimensional ground scene

Due to huge calculation of SAR echo simulation of a three-dimensional (3D) ground scene, a fast simulation method is proposed. First, the data of a 3D ground scene are fractionally interpolated based on the Fractional Brownian Motion (FBM) model. Second, the data interpolated are divided into lots of small facets whose precision meets the simulation requirement, the backscattering coefficients of the small facets are calculated. Third, the shaded area is judged by the comparison method of overlook angles. Three parallel levels are analyzed and the kernel function is designed. Finally, the computing method of reduction adding and external thread are also utilized under the framework of GPU in order to get high efficiency. With the methods mentioned above, the imaging result of experimental DEM data verifies the validity and superiority of the proposed method.     

电动汽车用锂离子电池热特性试验研究

为研究锂离子电池的热特性,以3 200 m A·h、3.67 V圆柱形三元材料锂电池为研究对象,进行了不同温度、不同充/放电倍率的热特性试验和低温加热试验.试验结果表明:随着充/放电电流的增大以及环境温度的降低,电池温度快速升高,低温下加热可以提高锂离子电池的充/放电性能.     

Direct 5-axis tool-path generation from point cloud input using 3D biarc fitting

In reverse engineering, geometrical information of a product is obtained directly from a physical shape by a digitizing device. To fabricate the product, manufacturing information (usually tool-path) must be generated from a CAD model. The data digitized must be processed and in most cases, a surface model is constructed from them using some of the surface fitting technologies. However, these technologies are usually complicated and the process for constructing a surface patch from a massive digitizing data is time-consuming. To simplify the process for getting tool-path information, a simple algorithm is proposed in this paper. The algorithm is used to generate a 5-axis machining tool-path. Instead of implementing any complicated surface fitting techniques, a direct method is proposed for constructing three-dimensional (3D) triangular mesh from the digitizing data with the mesh points considered as the tool contact locations. Depending on the locations of the points digitized, a decimation procedure is applied such that some of the digitizing data will be filtered out. Then, the tool axis orientations which must be determined in 5-axis tool-path are calculated and the tool center locations are determined accordingly. A 3D biarc fitting technique is applied for all the tool center locations so that a complete 5-axis tool-path is obtained.     

基于STUN协议的NAT路由器穿越算法设计与实现

NAT穿越是多媒体传输技术中的一个重要研究课题,STUN解决方案能解决部分NAT的穿越问题,但是还有一定的弊端.在STUN技术的基础上,介绍了NAT路由器的识别方法,详细分析并设计一种解决NAT路由器穿越问题的算法.并对处于不同NAT路由器环境下的直接通信给出一种解决方案.既提高了NAT路由器的识别效率,也改善了通信质量.     

跨谱段SAR散射中心多维参数解耦和估计方法

微波光子雷达发射大带宽跨谱段的信号,为目标的精细电磁特性描述和准确识别提供基础的同时,也亟需与之相应的大带宽大转角情况下的电磁模型参数提取方法.相比窄带条件,跨谱段信号数据量大,所含物理量信息维度高且复杂,大转角情况下距离和方位向耦合.该文提出跨谱段SAR散射中心多维参数解耦和估计方法,首先结合极坐标格式算法(PFA)和属性散射中心模型构造2维解耦波数域散射中心模型,再结合坐标下降法(CDA)将复杂的高维耦合参数估计方法简化为循环迭代的1维参数估计方法,有效降低字典维度和估计复杂度,并引入Hooke-Jeeves算法提高估计精度.最后根据各个散射中心的参数估计结果对它们的结构和位置进行识别,对仿真数据的处理实验验证了该文方法的有效性.