Dielectric behaviour of glasses and glass ceramics in the system BaO-PbO-TiO2-B2O3-SiO2

Glasses with varying molar ratios of PbO/BaO in the system BaO-PbO-TiO₂-B₂O₃-SiO₂ were prepared keeping (BaO + PbO)/TiO₂ ratio equal to one. The glasses were ceramized by two-stage heat treatment. X-ray diffraction indicates that PbTiO₃ crystallizes in lead-rich glasses while BaTiO₃ precipitates in barium-rich compositions. Solid solution (Ba, Pb)TiO₃ does not seem to crystallize over the entire range of compositions. Simultaneous presence of PbO and BaO in the initial glass composition reduces the yield of ferroelectric phase. Dielectric properties have been interpreted in terms of microstructural features.     

A data mining approach to characterize road accident locations

Data mining has been proven as a reliable technique to analyze road accidents and provide productive results. Most of the road accident data analysis use data mining techniques, focusing on identifying factors that affect the severity of an accident. However, any damage resulting from road accidents is always unacceptable in terms of health, property damage and other economic factors. Sometimes, it is found that road accident occurrences are more frequent at certain specific locations. The analysis of these locations can help in identifying certain road accident features that make a road accident to occur frequently in these locations. Association rule mining is one of the popular data mining techniques that identify the correlation in various attributes of road accident. In this paper, we first applied k-means algorithm to group the accident locations into three categories, high-frequency, moderate-frequency and low-frequency accident locations. k-means algorithm takes accident frequency count as a parameter to cluster the locations. Then we used association rule mining to characterize these locations. The rules revealed different factors associated with road accidents at different locations with varying accident frequencies. The association rules for high-frequency accident location disclosed that intersections on highways are more dangerous for every type of accidents. High-frequency accident locations mostly involved two-wheeler accidents at hilly regions. In moderate-frequency accident locations, colonies near local roads and intersection on highway roads are found dangerous for pedestrian hit accidents. Low-frequency accident locations are scattered throughout the district and the most of the accidents at these locations were not critical. Although the data set was limited to some selected attributes, our approach extracted some useful hidden information from the data which can be utilized to take some preventive efforts in these locations.

     

Communication controller and control unit design for Qi wireless power transfer

Qi, the wireless power standard, has been proposed to allow low power systems to receive power through wireless inductive power transfer. The standard outlines the essential, desired and optional requirements for developing the wireless power transfer platform. In this paper, we present the design and implementation results of communication controller for guided positioning single transmitter–single receiver wireless power transfer platform. Apart from the basic design, additional processing and data storage capability is introduced to make the design adaptive in terms of response time and the size of control data transfer. The method of estimating the amount of power transfer is modified to reduce design complexity and internal power consumption of power transmitter and receiver. The implementation results help to access the ratio of power transferred to resource utilization and the ratio of power transferred to power consumed in simplistic wireless power transfer platform.     

Designing parity check matrix to achieve linear encoding time in LDPC codes

Low-density parity-check (LDPC) codes have become the part of various communication standards due to their excellent error correcting performance. Existing methods require matrix inverse computation for obtaining a systematic generator matrix from parity check matrix. With the change in code rate or code length the process is repeated and hence, a large number of pre-processing computations time and resources are required. In the existing methods, the complexity of encoding is essentially quadratic with respect to the block length. In this paper, it is shown that the parity check matrix can be constructed using patterned sub-matrix structure such that the matrix inverse operation is replaced by matrix multiplication of sparse matrices. The sparseness of matrices is then utilized to obtain efficient encoders which can achieve encoding in real time with reduced pre-computation complexity. Hardware implementation of encoder and simulation results show that the proposed encoder achieves throughput in excess of 1 Gbps with the same error correcting performance as the conventional designs.     

Analysis of temporal jitter in a copper vapor laser system

Temporal jitter in a magnetic pulse compression based copper vapor laser (CVL) system is analyzed by considering ripple present in the input dc power supply and ripple present in the magnetic core resetting power supply. It is shown that the jitter is a function of the ratio of operating voltage to the designed voltage, percentage ripple, and the total propagation delay of the magnetic pulse compression circuit. Experimental results from a CVL system operating at a repetition rate of 9 kHz are presented.     

Shared hardware,high throughput implementation of 2D 4 × 4 and 8 × 8 integer transform for H.264/AVC high-profile coders

Two-dimensional discrete cosine transforms are used in the core transformations in all profiles of the H.264/Advanced video coding (AVC) standard. In this paper, implementing the resource sharing of high throughput 4 × 4 and 8 × 8 forward and inverse integer transforms for high definition H.264 is presented. It is shown that the 4 × 4 forward/inverse transform can be obtained from 8 × 8 forward/inverse transform using selective data input and data arrangement at intermediate stages. Fast 8 × 8 forward and inverse transform is implemented using matrix decomposition and matrix operation such as Kronecker product and direct sum. The proposed implementation does not require any transpose memory and has a dual clocked pipeline structure. Compared with existing designs, the gate count is reduced by 27.7% in the proposed design. The maximum operating frequency of the proposed system is approx. 1.3 GHz, while the throughput is 7 G and 18.7 G pixels/s for 4 × 4 and 8 × 8 forward integer transforms, respectively. The proposed design can be used for real time H.264/AVC high definition processing owing to its high throughput and low hardware cost.     

Performance and emission characteristics of diesel engine operated on plastic pyrolysis oil with exhaust gas recirculation

The objective of this research was to study the performance and emission characteristics of using waste plastic pyrolysis oil in diesel engine without any engine modification. The engine used in this study is a four-stroke single-cylinder naturally aspirated diesel engine (compression ignition). In the present work, the engine fuelled with blends of diesel fuel (DF) with plastic oil in the ratio of 90:10 (blend10%), 80:20 (blend20%), 70:30 (blend30%), and 50:50 (blend50%) are experimentally measured the efficiencies and emissions, analysed the performance, and compared results with that of DF.     

Influence of Montmorillonite Clay Content on Thermal,Mechanical, Water Absorption and Biodegradability Properties of Treated Kenaf Fiber/ PLA-Hybrid Biocomposites

Silicon - Nowadays, the starring attentions of the polylactic acid based composites are improved due to environmental awareness and diminution of petroleum oil. The bio-plastics were restricted to...     

Stabilization of foams and emulsions by mixtures of surface active food-grade particles and proteins

Surface active biopolymers such as proteins can form films with particularly high interfacial elasticities and viscosities and these molecules are widely exploited as foaming and emulsifying agents in foods. Solid particles of the correct size and wetting characteristics can also be extremely effective stabilizers of foams and emulsions, although the underlying mechanism of stabilization is somewhat different. Relatively little is known about what happens when both surface active polymers and surface active particles are present together. This work presents recent findings on the effects of mixtures of proteins plus novel food-compatible surface active particles. The proteins include caseins and whey proteins. The surface active particles prepared include cellulose + ethyl cellulose complexes, hydrophobically-modified starch granule particles and stable (non-spreading) protein-stabilized oil droplets. Interfacial shear rheology of adsorbed films was measured via a biconical bob apparatus and interfacial dilatational rheology was measured via a Langmuir trough type apparatus. The corresponding stability of bubbles to coalescence and disproportionation was assessed in separate experiments. Stability of oil-in-water emulsions was assessed via measurement of particle size distributions as function of time and visual assessment of the tendency to creaming and oiling off. In general, it is shown that the surface active particles on their own exhibit much lower measures of interfacial elasticity and viscosity than the proteins, but in combination with the proteins they appear to enhance the interfacial viscoelasticity considerably, with concomitant increases in bubble and emulsion droplet stability. There is little evidence of attractive interactions between the particles and the proteins, so a possible explanation of the increased stability is that the proteins increase the accumulation of particles at the interface, giving rise to increased jamming of particles at the interface.