如何受益硅烷偶联剂的奇妙功效

介绍了硅烷偶联剂的常规品种和新型产品：简述了硅烷偶联剂的作用机理和性能改进；总结了硅烷偶联剂的使用方法和注意要点：提出了只有正确使用才能奇效凸显，获益匪浅。     

基于GC-MS指纹图谱和化学计量学方法鉴别陈皮

制备了陈皮挥发油提取物并建立其气相色谱-质谱（GC-MS）指纹图谱,对不同批次的陈皮指纹图谱进行相似度评价;对其共有成分峰面积数据进行主成分分析（PCA）和层次聚类分析（HCA）。建立了具有16个共有峰的新会陈皮挥发油指纹图谱,通过化学计量学分析方法能将新会陈皮和其他陈皮样品准确区分开来;不同采摘期及贮存时间陈皮的成分呈现规律性特征。方法可用于不同产地、采摘期及贮存时间陈皮的鉴别,并为陈皮的质量控制提供依据。     

基于ARM的粉料自动仓库智能控制节点开发

基于ARM7芯片LPC2132和功率驱动芯片A3977，设计了一种两轴运动控制卡。给出了该运动控制卡硬件组成以及通讯协议、插补算法等具体实现方案。描述了所设计的粉末物料自动化仓库关键功能的实现方式，以及该运动控制卡作为智能节点在此对象中的实际应用情况。     

基于JPEG2000的ROI改进编码算法研究

在许多的图像应用中，基于感兴趣区域（ROI）图像编码技术占有重要地位。对图像压缩和传输处理，总是希望自己所感兴趣的图像区域能够得到相对于背景（BG）区域更好的压缩效果。在JPEG2000中采用了General Scaling Based Method 和 Maxshift Method的ROI编码技术。最重要平移和逐个平移法在最大位移法的基础上进行了改进、实验结果表明，该方法可行且性能优越。     

Effects of Bismuth Sesquioxide on the Characteristics of ZnO Varistors

The nonlinearity of ZnO varistors is significantly influenced by the Bi₂O₃ and Sb₂O₃ contents, as well as by the phase composition of the Bi₂O₃. Degradation of the current-voltage characteristics due to the applied voltage is not always lowered by the β—γ transition of the Bi₂O₃ phase. Lattice parameter determinations and stress analyses suggest that the Bi₂O₃-rich phase in multigrain junctions causes mechanical strain at the grain boundary which may play an important role in the current-voltage characteristics of ZnO varistors.     

切达干酪加速成熟方法及其研究现状

概述了对切达干酪的加速成熟的现状与研究方法,通过提高温度、添加促熟酶、修饰发酵剂细胞、高压处理等方法缩短切达干酪的成熟时间,提高经济效益。     

基于Visual FoxPro中表复制技术的研究

表复制是国家计算机等级考试中常出现的考试内容.通过对VFP中多个命令的介绍,分别阐述了几种实现表复制的不同方法与技术.     

SPINNING DISC MEASUREMENT OF TWO-STAGE CLEANING OF HEAT TRANSFER FOULING DEPOSITS OF MILK

The efficient and effective cleaning of milk protein – based deposits from heat transfer equipment is essential in the dairy industry. The aim of this study was to evaluate the effectiveness of two‐stage cleaning using acid and caustic. Stainless steel discs were fouled during heat transfer by skimmed milk and whey protein. The discs were then cleaned with acid and sodium hydroxide solutions under controlled mass transfer conditions using spinning disc techniques. The use of 0.5% nitric acid, and a commercial acid known as Triplex, as a rinse before caustic cleaning increased the cleaning rate by 2.5 times. The foulant was found to swell about 40% and calcium was leached out within 5 min after exposure to acid. The acid treatment is believed to cause a reduction in the viscosity, and hence an increase in dissolution, of the gel layer formed when caustic cleaning takes place.     

中空纤维更新液膜技术处理模拟含铜电镀废水

以10%(体积分数)LIX984N/煤油为液膜相,2 mol/L硫酸溶液为反萃相,研究了中空纤维更新液膜(HFRLM)技术对模拟电镀废水中二价铜离子的去除及浓缩效果,并讨论了停留时间对二价铜离子去除率的影响.结果表明,中空纤维更新液膜技术可同时实现废水中二价铜离子的分离与富集.经7级处理后,废水中二价铜离子的含量低于1.0 mg/L,二价铜离子的去除率为99.0%,达到国家排放标准;富集液中二价铜离子的浓度达1700 mg/L,富集因子为25.中空纤维更新液膜技术在含铜废水处理方面具有广阔的应用前景.