Ultrasound evaluation of piglet diaphragm function before and after fatigue

Clinically, a noninvasive measure of diaphragm function is needed. The purpose of this study is to determine whether ultrasonography can be used to 1) quantify diaphragm function and 2) identify fatigue in a piglet model. Five piglets were anesthetized with pentobarbital sodium and halothane and studied during the following conditions: 1) baseline (spontaneous breathing); 2) baseline + CO2 [inhaled CO2 to increase arterial PCO2 to 50-60 Torr (6.6-8 kPa)]; 3) fatigue + CO2 (fatigue induced with 30 min of phrenic nerve pacing); and 4) recovery + CO2 (recovery after 1 h of mechanical ventilation). Ultrasound measurements of the posterior diaphragm were made (inspiratory mean velocity) in the transverse plane. Images were obtained from the midline, just inferior to the xiphoid process, and perpendicular to the abdomen. M-mode measures were made of the right posterior hemidiaphragm in the plane just lateral to the inferior vena cava. Abdominal and esophageal pressures were measured and transdiaphragmatic pressure (Pdi) was calculated during spontaneous (Sp) and paced (Pace) breaths. Arterial blood gases were also measured. Pdi(Sp) and Pdi(Pace) during baseline + CO2 were 8 +/- 0.7 and 49 +/- 11 cmH2O, respectively, and decreased to 6 +/- 1.0 and 27 +/- 7 cmH2O, respectively, during fatigue + CO2. Mean inspiratory velocity also decreased from 13 +/- 2 to 8 +/- 1 cm/s during these conditions. All variables returned to baseline during recovery + CO2. Ultrasonography can be used to quantify diaphragm function and identify piglet diaphragm fatigue.     

High-dose busulfan, melphalan, thiotepa and peripheral blood stem cell infusion for the treatment of metastatic breast cancer

The purpose of this study was to determine the outcome of patients with metastatic breast cancer treated with high-dose busulfan (Bu), melphalan (Mel) and thiotepa (TT) followed by peripheral blood stem cell (PBSC) infusion. Fifty-one patients with chemotherapy refractory (n = 32) or responsive (n = 19) metastatic breast cancer received Bu (12 mg/kg), Mel (100 mg/m2) and TT (500 mg/m2) followed by PBSC collected after chemotherapy and growth factor (n = 43) or growth factor alone (n = 8). The 100 day treatment-related mortality was 8% including one death from cytomegalovirus pneumonia, one from aspiration pneumonia and two from regimen-related toxicity (RRT). Seven of 28 refractory (25%) and 5/7 (71%) responsive patients with evaluable disease achieved a complete response of all measurable disease or all soft tissue disease with at least improvement in bone lesions (PR*). Fifteen of 51 patients (29%) are alive and progression-free a median of 423 days (range 353-934) after treatment, 5/32 (16%) with refractory disease and 10/19 (53%) with responsive disease. The probabilities of progression-free survival (PFS) at 1.5 years for the patients with refractory (n = 32) and responsive (n = 19) disease were 0.24 and 0.53, respectively. These preliminary data suggest that high-dose Bu/Mel/TT has significant activity in patients with advanced breast cancer and may be superior to some previously published regimens.     

Intracranial arterial dolichoectasia in autosomal dominant polycystic kidney disease

Autosomal dominant polycystic kidney disease (ADPKD) is a systemic disorder with a variety of cardiovascular manifestations. This study presents a group of patients with ADPKD who had intracranial arterial dolichoectasia. One hundred seventy-eight ADPKD patients were screened with magnetic resonance angiography, 40 ADPKD patients had conventional angiography, and 98 ADPKD patients underwent a brain autopsy. For comparison, 360 patients without ADPKD who had magnetic resonance angiography and conventional angiography or brain autopsy were also studied. The prevalence of asymptomatic intracranial arterial dolichoectasia was 2.2% (4 of 178), 2.5% (1 of 40), and 2.0% (2 of 98) in the three ADPKD groups, respectively. None of the patients without ADPKD had intracranial arterial dolichoectasia. In addition to the seven patients with asymptomatic disease, two ADPKD patients with vertebrobasilar dolichoectasia had posterior circulation ischemic symptoms. The mean age of the nine patients (five men and four women) was 56.6 yr (range, 41 to 67 yr). The posterior circulation was involved in five patients, the anterior circulation was involved in two patients, and both were involved in two patients. Arterial dissection was believed to have caused middle cerebral artery dolichoectasia in one patient, and intracranial arterial dissections were strongly suspected in two other patients. Six of the nine patients with intracranial arterial dolichoectasia had additional vascular manifestations of ADPKD. Some patients with ADPKD are at an increased risk of developing intracranial arterial dolichoectasia and dissections. Recognizing this association is important because (1) it may be a cause of stroke; (2) it may mimic a saccular aneurysm on radiographic studies; and (3) it suggests that the arteriopathy of ADPKD may be more generalized than previously believed.     

Improved activity and thermostability of Candida antarctica lipase B by DNA family shuffling

DNA family shuffling was used to create chimeric lipase B proteins with improved activity toward the hydrolysis of diethyl 3-(3',4'-dichlorophenyl)glutarate (DDG). Three homologous lipases from Candida antarctica ATCC 32657, Hyphozyma sp. CBS 648.91 and Crytococcus tsukubaensis ATCC 24555 were cloned and shuffled to generate a diverse gene library. A high-throughput screening assay was developed and used successfully to identify chimeric lipase B proteins having a 20-fold higher activity toward DDG than lipase B from C.antarctica ATCC 32657 and a 13-fold higher activity than the most active parent derived from C.tsukubaensis ATCC 24555. In addition, the stability characteristics of several highly active chimeric proteins were also improved as a result of family shuffling. For example, the half-life at 45 degrees C and melting point (T(m)) of one chimera exceeded those of lipase B from C.antarctica ATCC 32657 by 11-fold and 6.4 degrees C, respectively, which closely approached the stability characteristics of the most thermostable parent derived from Hyphozyma sp. CBS 648.91.     

Reflectivity and scattering measurements of an Advanced X-ray Astrophysics Facility test coating sample

Reflectivity and scattering profile measurements were made on a gold-coated witness sample produced to evaluate mirror coatings for the Advanced X-ray Astrophysics Facility program. Reflectivity measurements were made at Al K, Ti K, and Cu K energies as a function of incident graze angle. The results are fit to a model that includes the effects of roughness, particulate and organic contamination layers, and gold-coating density. Reflectivities are close to theoretical, with the difference being well accounted for by 4.1 ? of roughness at spatial frequencies above 4 μm(-1), a gold-coating density equal to 0.98 bulk, and a surface contaminant layer 27 ? thick. Scattering measurements extending to ±35 arcmin of the line center were obtained by the use of Al K x rays and incidence angles from 0.75° to 3°. The scattering profiles imply a power spectral density of surface-scattering frequencies that follows a power law with an index of -1.0 and a total surface roughness for the spatial frequency band between 0.05 μm(-1) and 4 μm(-1) of 3.3 ? Combining the roughnesses derived from both the reflectivity and scattering measurements yields a total roughness of 5.3 ? for scattering frequencies between 0.05 μm(-1) and 15,000 μm(-1).     

Low Voltage Electrowetting-on-Dielectric Platform using Multi-Layer Insulators

A low voltage, two-level-metal, and multi-layer insulator electrowetting-on-dielectric (EWD) platform is presented. Dispensing 300pl droplets from 140nl closed on-chip reservoirs was accomplished with as little as 11.4V solely through EWD forces, and the actuation threshold voltage was 7.2V with a 1Hz voltage switching rate between electrodes. EWD devices were fabricated with a multilayer insulator consisting of 135nm sputtered tantalum pentoxide (Ta(2)O(5)) and 180nm parylene C coated with 70nm of CYTOP. Furthermore, the minimum actuation threshold voltage followed a previously published scaling model for the threshold voltage, V(T), which is proportional to (t/ε(r))(1/2), where t and ε(r) are the insulator thickness and dielectric constant respectively. Device threshold voltages are compared for several insulator thicknesses (200nm, 500nm, and 1μm), different dielectric materials (parylene C and tantalum pentoxide), and homogeneous versus heterogeneous compositions. Additionally, we used a two-level-metal fabrication process, which enables the fabrication of smaller and denser electrodes with high interconnect routing flexibility. We also have achieved low dispensing and actuation voltages for scaled devices with 30pl droplets.     

Fluid Flow and Defect Formation in the Three-Dimensional Dendritic Structure of Nickel-Based Single Crystals

Fluid flow within the dendritic structure at the solid–liquid interface in nickel-based superalloys has been studied in two directionally solidified alloy systems. Millimeter-scale, three-dimensional (3D) datasets of dendritic structure have been collected by serial sectioning, and the reconstructed mushy zones have been used as domains for fluid-flow modeling. Flow permeability and the influence of dendritic structure on flow patterns have been investigated. Permeability analyses indicate that the cross flow normal to the withdrawal direction limits the development of flow instabilities. Local Rayleigh numbers calculated using the permeabilities extracted from the 3D dataset are higher than predicted by conventional empirical calculations in the regions of the mushy zone that are prone to the onset of convective instabilities. The ability to measure dendrite surface area in 3D volumes permit improved prediction of permeability as well.     

Making friends in online games: gender differences and designing for greater social connectedness

ABSTRACT

While online multiplayer games provide an opportunity for players to both maintain and establish new connections, male and female players have been found to experience these environments differently. Interviews (n?=?22) and focus groups (n?=?14) were used to explore these differences as they impact on creating new social connections, as well as to provide recommendations for the development of new social tools and features that account for these differences. While all participants experienced toxicity and performance pressure as barriers to forming new connections, female players uniquely reported the impacts of misogynistic targeting and stereotype threat. In turn, female players wishing to avoid these stresses would often mask their gender. The common practice of gender misrepresentation by both male and female players impacted female players’ ability to create social connections through voice technology, as well as building their distrust of unknown others. Recommendations are made to build social connectedness between players taking into account the specific constraints faced by female players. These include establishing mentoring opportunities as well as profiling players beyond their immediate skill or rank. Additionally, the desire for control of one’s online identity presents practical challenges that may be overcome through thoughtful design.     

Identification of the Trail Pheromone of the Pavement Ant Tetramorium immigrans (Hymenoptera: Formicidae)

Journal of Chemical Ecology - Four species of Tetramorium pavement ants are known to guide foraging activities of nestmates via trail pheromones secreted from the poison gland of worker ants, but...