Recent advances in isotropic conductive adhesives for electronics packaging applications

Isotropic conductive adhesives (ICAs) have recently received a lot of focus and attention from the researchers in electronics industry as a potential substitute to lead-bearing solders. Numerous studies have shown that ICAs possess many advantages over conventional soldering such as environmental friendliness, finer pitch printing, lower temperature processing and more flexible and simpler processing. However, complete replacement of soldering by ICAs is yet not possible owing to several limitations of ICAs which are mainly related to reliability aspects like limited impact resistance, unstable contact resistance, low adhesion and conductivity etc. Continued efforts for last 15 years have resulted in development of ICAs with improved properties. This review article is aimed at providing a better understanding of ICAs, their principles, performance and significant research and development work addressing the technological utility of ICAs.     

Observers for stabilization of systems with matched uncertainty

In this article, we study the design of observer-based robust linear feedback controllers. The uncertainty, which can enterA, and either theB orC matrices, is assumed to satisfy certain matching conditions. Lyapunov techniques are used to establish sufficient conditions for stability, given an uncertainty bound. In particular, sufficient conditions are obtained that, if met, result in stabilizing controllers regardless of the size of the uncertainty entering the system matrix, as long as the standard constraints on the uncertainty entering the input or output matrices are met. As with the case of more general forms of uncertainty, the resulting observers often have high gains. To study performance, the problem of disturbance rejection is considered. Sufficient conditions are presented for obtaining control laws that stabilize the closed loop system, regardless of the size of the uncertainty entering the system matrix, while simultaneously guaranteeing arbitrarily small infinity norm for the transfer function from the plant disturbances to the outputs.     

Dynamic analysis and drilling degrees of freedom

Finite element methods for dynamic analysis employing elements with drilling degrees of freedom are presented. The formulation is based on a variational principle in which displacements and rotations are interpolated independently. The issue of zero masses corresponding to rotational degrees of freedom is addressed and techniques for defining consistent and lumped rotational mass matrices are presented.     

A knowledge-based system for sensor selection

This paper presents a Knowledge-based system (KBS) developed to allow users, who may not be knowledgeable about sensors, to select sensors suitable for their specific needs. The KBS runs on a micro-computer. The selection criteria are user specified and are based on the desired measurement parameters. The system output includes all of the operational and dimensional parameters of the recommended sensor, price, and vendor information.     

On the application of Harris hawks optimization (HHO) algorithm to the design of microchannel heat sinks

Engineering with Computers - A novel Harris hawks optimization algorithm is applied to microchannel heat sinks for the minimization of entropy generation. In the formulation of the heat transfer...     

Preparation,Properties and Applications of the Hybrid Organic/Inorganic Nanocomposite Based on Nanoporous Carbon Matrix

Journal of Inorganic and Organometallic Polymers and Materials - Nanoporous carbon matrix was prepared by the sol–gel process from pyrogallol-formaldehyde (PF) mixtures in water using picric...     

Microstructure and Sliding Wear Behaviour of Ni(Cr)-TiB_2 Coatings Deposited by HVOF Spraying of SHS Powders

THERMAL SPRAYING provides a large range ofcoatings,which increase the wear resistance ofsubstrates[1].One of the major coating families is thecermet,composed of hard ceramic particles with ametallic binder.The most commonly used cermetcoatings in industrial applications are based on eitherthe WC-Co or the Cr3C2-Ni(Cr)systems with WC-17wt%Co and Cr3C2-25wt%Ni(Cr)being typicalcompositions[2,3].Although WC-Co deposits are hardand wear resistant at ambient temperatures their rangeof ap…     

Methodology to resolve the transport equation with the discrete ordinates code TORT into the IPEN/MB-01 reactor

Resolution of the steady-state Neutron Transport Equation in a nuclear pool reactor is usually achieved by means of two different numerical methods: Monte Carlo (stochastic) and Discrete Ordinates (deterministic). The Discrete Ordinates method solves the Neutron Transport Equation for a set of selected directions, obtaining a set of directional equations and solutions for each equation which are the angular flux. In order to deal with the energy dependence, an energy multi-group approximation is commonly performed, obtaining a set of equations depending on the number of energy groups. In addition, spatial discretization is also required and the problem is solved by sweeping the geometry mesh. However, special cross-sections are required due to the energy and directional discretization, thus a methodology based on NJOY99 code capabilities has been used. Finally, in order to demonstrate the capability of this method, the 3D discrete ordinates code TORT has been applied to resolve the IPEN/MB-01 reactor.     

Ellipsoidal neighbourhood outlier factor for distributed anomaly detection in resource constrained networks

Anomaly detection in resource constrained wireless networks is an important challenge for tasks such as intrusion detection, quality assurance and event monitoring applications. The challenge is to detect these interesting events or anomalies in a timely manner, while minimising energy consumption in the network. We propose a distributed anomaly detection architecture, which uses multiple hyperellipsoidal clusters to model the data at each sensor node, and identify global and local anomalies in the network. In particular, a novel anomaly scoring method is proposed to provide a score for each hyperellipsoidal model, based on how remote the ellipsoid is relative to their neighbours. We demonstrate using several synthetic and real datasets that our proposed scheme achieves a higher detection performance with a significant reduction in communication overhead in the network compared to centralised and existing schemes.     

Positional distribution of CLA in TAG of lamb tissues

The content and positional distribution of CLA in TAG fractions of lamb tissues was examined with either preformed CLA or the linoleic acid precursor of CLA in the diet as experimental treatments. The CLA content of phospholipid (PL) from these tissues was also examined. Thirteen lambs were randomized to the following dietary treatments: (i) control diet (no supplement); (ii) CLA supplementation (0.33 g d⁻¹ for 21 d prior to weaning) to milk-replacer of pre-ruminating lambs, or (iii) feeding linoleic acid-rich oil (6% safflower oil on a dry matter basis) to weaned ruminating lambs. At slaughter, tissue samples were procured from diaphragm, rib muscle, and subcutaneous (SC) adipose tissue. Safflower oil supplementation in the diet resulted in an increase in CLA content of the TAG from diaphragm, rib muscle, and SC adipose tissue by about threefold (P<0.05) on a mol% basis. CLA was localized to the sn-1/3 positions of TAG. Animals that received pre-formed CLA, however, had increased proportions of CLA at the sn-2 position of TAG from SC adipose tissue, suggesting that there were tissue-specific dietary effects and possible age-related effects on the mode of FA incorporation into TAG. Safflower oil supplementation in the diet had no effect on the CLA content of PL from diaphragm, rib muscle, and SC adipose tissue, suggesting that CLA was preferentially incorporated into the TAG of these tissues.