Effect of heat treatment on the microstructure and hardness of C-Cr-W-Mo-V-RE Fe-based hardfacing layer

0IntroductionHot-rollers and scissors are the critical parts of thesteel rolling equipments.At present,the surface soften-ing,the early wearing and the tearing are the primary rea-sons for the lowservice life of the hot-rollers and scissors.Although hardfacing has been applied to repaire the partseasily being worn and torn,such as the hot-rollers and thescissors,and has been obtained economic benefits[1-3],this technology has common problem:if the hardfacing lay-er contains more excessive allo…     

晶化机制与激活能的晶化速率参比法确定

本文根据修正的Kissinger公式提出一种确定非晶材料晶化机制与激活能的最大晶化速率参比法。以Ar_(70)Cu_(30)非晶合金为例,研究了晶化机制与激活能及其与压力的关系。     

40Cr钢渗氮过程中碳原子的迁移

将正火４０Ｃｒ钢样在不同温度下进行不同时间的气体渗氮，对其横断面进行波谱分析，发现渗氮前沿附近自始至终存在着典型的贫碳区，其两侧为富碳区，透射电镜分析结果表明，碳原子的重新分布包括碳化物的回溶、碳的扩散及碳化物长大三个过程。     

CORROSION FAILURE ANALYSIS OF FLAME SPRAYED Zn-A115 COATING IN SEA WATER

The morphology,microstructure,chemical composition and electrochemical behavior of theflame sprayed Zn-Al15 coating after corrosion test in sea water have been investigated.Theresults show that the selective dissolution of the laminar euteetic structure of the Zn-AI15coating is the fundamental cause for its similarity in electrochemical behavior with Zn coatingand kinetic behavior with Al coating.In the beginning period of sea water corrosion,the com-bined action of the laminar eutectic structure of the coating together with the residual stressmay induce the stress corrosion cracking of the coating,and result in the crevice corrosion.The coating then will bulge and.fail in local areas due to embrittlement itself,stacking and ex-pansion of corroded products under the residual stress.     

不同压力温度条件下聚合的Si-Ni-B中介聚晶金刚石(PCD)抗压强度及组织特征研究

在一系列高温超高压条件下,制备了Si-Ni-B中介结合的聚晶金刚石(PCD),用压缩试验、X射线衍射分析、SEM、金相分析研究了PCD聚合的温度、压力条件对其抗压强度及组织特征的影响。     

快速自适应运动估计算法

为降低H.264中运动估计的复杂性,通过对自然图像序列的分析,提出了一种基于块的运动特征的快速自适应搜索算法。该算法充分利用视频序列中当前块的运动状态,根据不同块的运动情况合理选择运动搜索模板。实验表明,该算法在保证重构图像质量的前提下,编码速度有了显著提高,保证了实时应用的要求。     

基于主运动轮廓线的步态表示与识别

提出了一个基于步态主运动轮廓线构造特征矩阵, 并进行特征表示和分类识别的算法. 该算法首先从步态轮廓线提取三段代表人体主要运动的部分, 基于它们到质心的横向距离构造描述步态图像序列的三个特征矩阵. 然后, 采用主分量分析(Principal component analysis, PCA)方法去除特征矩阵中的冗余数据, 并利用多元判别分析(Multiple discriminant analysis, MDA)将特征矩阵投影到更易于分类的空间. 最后, 在USF步态数据库上计算测试对象的Rank n识别率, 并与其他三个有代表性的算法进行比较. 实验结果显示, 本文算法的平均识别率更高, 抗干扰性更强.     

Solution of a hollow thick-wall cylinder subject to quadric function pressures and its limit when l→∞

Analytical solution of basic equations in any discipline, especially in engineering science, is important. The solution of a hollow thick-wall cylinder subject to variable pressures, which is in fact a solution to the spatial symmetric problem, has found wide applications[1]. But the pressure is not always distributed uniformly in engineering prac-tice. So it is very significant to get the solution of arbitrarily distributed pressures. Among various functions, the multinomial function is most …