Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

Immunoelectron localization of mitochondrial F1 factor in cryosections of heart muscle cells

Immunocytochemistry was used to investigate the localization of F1 ATPase in mitochondria of cryosections of adult mouse heart muscle cells. The initial aldehyde fixation was the only denaturation step for antigens. The fine structure was preserved with contrast enhancement as the sections were maintained hydrated, with the advantage that the entire procedure is completed in one working day. The reaction was highly specific, and entire mitochondria were labeled with the Protein A-gold complex. A new analytical technique, electron spectroscopic imaging (ESI), contributed to a better visualization of the localization of the F1 factor.     

Purification of Ellagic Acid by UF Membranes

Ellagic acid (2, 3, 7, 8‐tetrahydroxy(1)benzopyrano(5, 4, 3‐cde)(1)benzopyran‐5, 10‐dione) was selected as a model pollutant which is present in the tannic fraction of cork processing wastewater. The ultrafiltration of aqueous ellagic acid solutions through three membranes was studied in tangential UF laboratory equipment. Two of the membranes were polyethersulfone (Biomax10K and Biomax5K, with MWCO of 10000 and 5000 Da, respectively), and the third made of regenerated cellulose (Ultracel5K, with MWCO of 5000 Da). The water hydraulic permeability was evaluated for each membrane. The evolution of the permeate flow rate with processing time was followed, and the influence of the main operating variables (feed flow rate, trans‐membrane pressure and nature of the membranes) on the permeate flux was also established. According to the hypothesis of the film theory, the intrinsic and apparent rejection coefficients, as well as the mass transfer coefficients, were also determined, and the values obtained were discussed as a function of the operating conditions used.     

Correlation between synthesis conditions, coherently diffracting domain size and cubic phase stabilization in barium titanate

The Constant Rate Thermal Analysis method has been used under different experimental conditions to obtain barium titanate powder of very small grain size. Both a crystallographic and a dielectric study ham been carried out on samples sintered at different temperatures. It is deduced that the formation of small coherently diffracting domains is improved by the generation of oxygen vacancies and the cubic phase stabilization depends on the coherently diffracting domain size rather than on the particle size.     

Kinetics of the Initial Stage of Sintering from Shrinkage Data: Simultaneous Determination of Activation Energy and Kinetic Model from a Single Nonisothermal Experiment

A new method for the kinetic analysis of the initial stage of sintering for constant-heating-rate data has been proposed. Unlike all of the methods previously reported in the literature, this new method proposed here allows the simultaneous determination of the activation energy and the kinetic model from a single dilatometric curve recorded under a linear-heating-rate program. The proposed method has been tested with simulated sintering curves and experimental results have been obtained for the sintering of a rutile sample.     

Hefestos: an intelligent system applied to ubiquitous accessibility

This article proposes Hefestos, an intelligent system applied to ubiquitous accessibility. This model uses ubiquitous computing concepts to manage accessibility resources for people with disabilities. Among the concepts employed, context awareness, user profiles and trails management can be highlighted. The paper proposes an ontology for accessibility and delineates scenarios of its application in everyday life of people with disabilities. Moreover, the implementation of a smart wheelchair prototype and its application in a practical experiment is described. Ten users with a range of disability degrees tried the system and filled out a survey based on the technology acceptance model. This experiment demonstrated the main functionalities and the acceptance of the system. The results showed 96 % of acceptance regarding perceived easy of use and 98 % in perceived usefulness. These results were encouraging and show the potential for implementing Hefestos in real life situations.     

数学形态学多结构元素的道路提取

提出了一种从遥感图像中提取道路的有效算法。该算法在数学形态学的基础上,针对图像中噪声和边缘形态的不同选择不同的结构元素进行道路边缘提取。实验表明,该算法具有良好的道路提取能力。     

Mechanical and thermal behaviour of an acrylic bone cement modified with a triblock copolymer

The basic formulation of an acrylic bone cement has been modified by the addition of a block copolymer, Nanostrength^® (NS), in order to augment the mechanical properties and particularly the fracture toughness of the bone cement. Two grades of NS at different levels of loading, between 1 and 10 wt.%, have been used. Mechanical tests were conducted to study the behaviour of the modified cements; specific tests measured the bend, compression and fracture toughness properties. The failure mode of the fracture test specimens was analysed using scanning electron microscopy (SEM). The effect of NS addition on the thermal properties was also determined, and the polymerisation reaction using differential scanning calorimetry. It was observed that the addition of NS produced an improvement in the fracture toughness and ductility of the cement, which could have a positive contribution by reducing the premature fracture of the cement mantle. The residual monomer content was reduced when the NS was added. However this also produced an increase in the maximum temperature and the heat delivered during the polymerisation of the cement.     

MPC for battery/fuel cell hybrid vehicles including fuel cell dynamics and battery performance improvement

In this paper, the performance and durability of hybrid PEM fuel cell vehicles are investigated. To that end, a hybrid predictive controller is proposed to improve battery performance and to avoid fuel cell and battery degradation. Such controller deals with this complex control problem by handling binary and continuous variables, piecewise affine models and constraints. Moreover, the control strategy is to track motor power demand and keep batteries close to a desired battery state of charge which is appropriately chosen to minimize hydrogen consumption. It is important to highlight the consideration of constraints which are directly related to the goals of this paper, such as minimum fuel cell power threshold and time limitation between fuel cell startups and shutdowns. Furthermore, different models have been elaborated and particularized for a vehicle prototype. These models include few innovations such as a reference governor which smooths fuel cell power demand during sharp power profiles, forcing batteries to supply such peaks and resulting a longer fuel cell lifetime. Battery thermal dynamics are also taken into account in these models in order to analyze the effect of battery temperature on its degradation. Finally, this paper studies the feasibility of the real implementation, presenting an explicit formulation as a solution to reduce execution time. This explicit controller exhibits the same performance as the hybrid predictive controller does with a reduced computational effort. All the results have been validated in several simulations.     

Stochastic stabilization of differential systems with general decay rate

Some sufficient conditions concerning stability of solutions of stochastic differential evolution equations with general decay rate are first proved. Then, these results are interpreted as suitable stabilization ones for deterministic and stochastic systems. Also, they permit us to construct appropriate linear stabilizers in some particular situations.