城市规划中的水资源承载力计算——以惠州市为例

探讨水资源承载力综合评估和多目标计算理论在城市规划中的应用。运用灰色多层次综合评估模型对惠州市水资源承载力进行定性的综合评价,应用多目标规划理论对城市经济发展规划不同方案下的惠州市水资源承载力作了定量计算。     

非标准工况下空分设备增产氩的研究与实践

文章对非标准工况下的空分设备增产氩措施进行了研究。以宝钢6#60000m3/h空分设备为例,通过设计型算法和校核型算法,建立了空分设备精馏的数学模型,通过改变数学模型的参数,分析了在非标准工况下精馏塔内的组分浓度分布,并提出了优化后的操作方案和操作参数,实施后提高了空分设备的氩提取率,取得了显著的经济效益。     

二次盐水及离子膜电解工序常见问题简析

介绍了二次盐水及离子膜电解工序的主要设备和流程,对二次盐水及离子膜电解工序运行中出现的问题进行了分析,并提出了解决措施。     

马钢A高炉炉体冷却水管道在线改造实践

马钢A高炉拟进行快速大修,停炉前需要提前将炉基进行切割,炉底平台管道需要提前进行管道移位,尤其是180°方向和0°方向有大量的主管和支管,需全部移位改造。通过对方案的不断优化,采取新的工艺技术,经过一个半月的施工,完成了高炉冷却水管在线改造。     

二合一石墨合成炉运行总结

简要介绍了二合一石墨合成炉合成氯化氢的工艺流程及设备规格,并对运行情况进行了总结分析。     

Water modeling of molten steel flow in a multi-strand tundish with gas blowing

Fluid flow characteristics in a four-strand tundish with gas blowing were studied by water modeling experiments.It is found that gas blowing can greatly improve the flow characteristics in the tundish with a turbulence inhibitor.It dramatically increases the peak concentration time,and greatly decreases the dead volume,and reduces the minimum residence time.The gas blowing location,gas flow rate,and porous plug area greatly influence the flow characteristics in the tundish;the gas blowing location near t...     

循环流化床烟气脱硫塔进口流场模拟及优化

为了改进循环流化床脱硫塔因下部装有的弯管加文丘里管式入口结构所造成的底部区域不均匀气流场,采用RNGκ-ε湍流模型对脱硫塔的气流场进行了模拟计算,讨论了这种进口结构对脱硫塔流场的影响机理,并对该进口结构进行了优化.结果表明:RNGκ-ε模型对于该流场具有较好的模拟效果,在弯管和文丘里管综合作用下,脱硫塔内中下部的气流场分布不均,而返料口对脱硫塔的气流场影响很小.通过对比3种入口结构的优化方式,发现采用改进导流叶片的方式优化效果较好,可成功均布脱硫塔气流场,造成的床层压损也很小.     

南天山与西昆仑帕米尔冲断带的空间对接关系研究

利用人工和天然地震剖面解释,地面地质资料分析,研究了位于塔里木盆地西北缘的南天山与西昆仑帕米尔冲断带的空间对接关系.结果表明:在浅层阿图什与克拉托—明尧乐背斜带之间是来自于南天山与西昆仑帕米尔冲断带的构造结合带,南天山冲断带可分为浅层叠瓦式冲断系统和深层的隐伏双重冲断系统,西昆仑帕米尔冲断带以乌泊尔基底断裂为界分成北部的克拉托—明尧乐背斜带和南侧的乌泊尔背驮盆地;在深层塔里木地块受到新生代以来印度板块与欧亚板块的碰撞和乌泊尔右行走滑断裂的控制作用,产生南北两侧的双向大陆深俯冲作用,致使南天山与西昆仑仰冲于塔里木地块而抬升,形成南北两大新生代复活造山带.     

Experimental study on the time-dependent dynamic mechanical behaviour of C60 concrete under

To study the dynamic mechanical behavior of C60 concrete at high temperatures, impact tests under different steady-state temperature fields (100, 200, 300, 400 and 500.℃) were conducted under a variety of durations at the corresponding constant high temperature, namely 0, 30, 60, 90 and 120.min, employing split Hopkinson pressure bar (SHPB) system. In addition, the impact tests were also conducted on the specimens cooled from the high temperature to the room temperature and the specimen under room temperature. From the analysis, it is found that C60 concrete has a time-dependent behavior under high-temperature environment. Under 100, 200, 300, 400 and 500.℃ steady-state temperature fields respectively, as the duration at the corresponding constant high temperature increases, the dynamic compressive strength and the elastic modulus decrease but the peak strain generally ascends. After cooling to the room temperature, the dynamic compressive strength and the elastic modulus descend as well, but the peak strain increases first and then decreases slightly, when the duration increases. For specimens under and cooled from the high-temperature, as the temperature increases, the dynamic compressive strength and the peak strain raise first and then reduce gradually,and the dynamic compressive strength of specimen under high temperature is higher than that of the specimen cooled from the same high temperature.     

弧齿锥齿轮传动设计中数据的程序化处理

针对弧齿锥齿轮传动设计手册中复杂数表、线图数据的处理问题进行分析研究,提出了相应的程序化处理方案。将复杂数据有机融入设计计算程序,可实现对当前图形数据的直接检索和调用,解决了弧齿锥齿轮传动设计中的数据处理问题。