Monte Carlo simulation of gas phase polymerization of 1,3‐butadiene. Part II: Kinetics optimization and confirmation

Studies on the deactivations and initiations of gas phase polymerizations of 1,3‐butadiene have been achieved by Monte Carlo simulation. Initiation and deactivation control the reaction before and after the peak of the polymerization rate, respectively. The influence of polymerization temperature has been studied. Monte Carlo modeling of polymerization kinetics and mechanism was confirmed by the agreement of experimental data and simulation results of polymerizations run with a temporary evacuation of monomer. The balance of catalysts and active chains is established by both initiation and chain transfer reactions with cocatalyst, which causes a ‘pseudo‐stability’ stage. © 2003 Society of Chemical Industry     

Unicast-based multicast communication in wormhole-routed networks

Multicast communication, in which the same message is delivered from a source node to an arbitrary number of destination nodes, is being increasingly demanded in parallel computing. System supported multicast services can potentially offer improved performance, increased functionality, and simplified programming, and may in turn be used to support various higher-level operations for data movement and global process control. This paper presents efficient algorithms to implement multicast communication in wormhole-routed direct networks, in the absence of hardware multicast support, by exploiting the properties of the switching technology. Minimum-time multicast algorithms are presented for n-dimensional meshes and hypercubes that use deterministic, dimension-ordered routing of unicast messages. Both algorithms can deliver a multicast message to m-1 destinations in [log ₂ m] message passing steps, while avoiding contention among the constituent unicast messages. Performance results of implementations on a 64-node nCUBE-2 hypercube and a 168-node Symult 2010 2-D mesh are given     

变压器的经济运行与节电

基于变压器的节电与变压器的运行有着密切的关系，阐述了实现变压器经济运行的方法与措施。     

FAST MEASUREMENT OF ASH CONTENT IN COAL WASHING PLANT

The coal filter cake is a product of fine coal after floatation which has an ash content of 7-13%, water content of 30±2%, and a particle size of less than 1 mm. The ash content was measured by the intensity of the single backscattered gamma-ray, and its accuracy is mainly dependent on the energy of the gamma-ray. The 238Pu low energy photon source is selected in this work. The energy of its gamma-ray is 15 keV, which can result not only in the best sensitivity, but also in the lowest contribution to the environment radiation. The root mean square deviation of the ash measurement is±0.33% (±1σ).     

Influence of Intraperitoneal Injection of Rare Earth Compounds on the Activities of Antioxidant Enzymes and the Level of Lipid Peroxidation in Mice Livers

ＩｎｆｌｕｅｎｃｅｏｆＩｎｔｒａｐｅｒｉｔｏｎｅａｌＩｎｊｅｃｔｉｏｎｏｆＲａｒｅＥａｒｔｈＣｏｍｐｏｕｎｄｓｏｎｔｈｅＡｃｔｉｖｉｔｉｅｓｏｆＡｎｔｉｏｘｉｄａｎｔＥｎｚｙｍｅｓａｎｄｔｈｅＬｅｖｅｌｏｆＬｉｐｉｄＰｅｒｏｘｉｄａｔｉｏｎｉｎＭｉｃ...     

Parallel Algorithms for Image Template Matching on Hypercube SIMD Computers

This correspondence presents several parallel algorithms for image template matching on an SIMD array processor with a hypercube interconnection network. For an N by N image and an M by M window, the time complexity is reduced from O(N2M2) for the serial algorithm to O(M2/K2 + M * log2 N/K + log2 N * log2 K) for the N2K2-PE system (1 ? K ? M), or to O(N2M2/L2) for the L2-PE system (L ? N). With efficient use of the inter-PE communication network, each PE requires only a small local memory, many unnecessary data transmissions are eliminated, and the time complexity is greatly reduced.     

Preparations and properties of thermosensitive terpolymers of N‐isopropylacrylamide,sodium 2‐acrylamido‐2‐methyl‐propanesuphonate,and N‐tert‐butylacrylamide

Terpolymers based on N‐isopropylacrylamide, sodium 2‐acrylamido‐2‐methyl‐propanesulfonate, and N‐tert‐butylacrylamide were synthesized by free‐radical copolymerization with 2,2′‐azobisisobutyronitrile as an initiator. The lower critical solution temperatures (LCSTs) of the linear polymer aqueous solutions were determined by the measurement of the transmittance on UV at different temperatures. The influence of the polymer concentration, polymer composition, and ionic strength on the LCSTs of the linear polymers was investigated. The LCST decreased with increases in the hydrophobic monomer N‐tert‐butylacrylamide, polymer concentration, and ionic strength. The phase transition became sharp when the polymer concentration and ionic strength increased. Meanwhile, the crosslinked hydrogels were prepared with the same recipe used for the linear terpolymers, but a crosslinker was added to the reaction system. The swelling ratios of the hydrogels at various temperatures and salt solutions were determined. The hydrogels possessed both high swelling ratios and thermosensitivity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Integrated size and topology optimization of skeletal structures with exact frequency constraints

The present paper studies the integrated size and topology optimization of skeletal structures under natural frequency constraints. It is found that, unlike the conventional compliance-oriented topology optimization problems, the considered problem may be strongly singular in the sense that the corresponding feasible domain may be disconnected and the global optimal solutions are often located at the tips of some separated low dimensional sub-domains when the cross-sectional areas of the structural components are used as design variables. As in the case of stress-constrained topology optimization, this unpleasant behavior may prevent the gradient-based numerical optimization algorithms from finding the true optimal topologies. To overcome the difficulties posed by the strongly singular optima, some particular forms of area/moment of inertia-density interpolation schemes, which can restore the connectedness of the feasible domain, are proposed. Based on the proposed optimization model, the probability of finding the strongly singular optimum with gradient-based algorithms can be increased. Numerical examples demonstrate the effectiveness of the proposed approach.     

Study of different effect on foaming process of biodegradable bionolle in supercritical carbon dioxide

Microcellular foaming of biodegradable Bionolle in supercritical CO₂ has been produced. The effects of a series of variable factors, such as saturation temperature, saturation pressure, and depressurization time and step on the foam structures and density, were studied through measurement of density and SEM observation. The experimental results show that higher saturation temperatures lead to an increase in bulk densities; and different depressurization time and step result in different product cell morphology. In addition, at some saturation temperature, the orientation of the cells can be found in the product morphology. XRD experimental results show that the foaming treatment with SC CO₂ increased the crystallinity of Bionolle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2901–2906, 2006     

高速公路收费站车辆能耗研究

车辆通过高速公路收费站时,需要减速或停车缴费,当车辆较多时,容易形成排队,产生大量延误,大大削弱了车辆的运行效率,增加了车辆的能耗,同时使得车辆尾气的排放量增加,严重污染了环境。本文使用排队论知识对收费站车辆排队与疏散情况进行分析,减少车辆的排队等候时间和驶离站口所需时间,以达到减少行车能耗的目的。最后,通过一个实例给出几种收费方式下的能耗,并给出了相应的分析和建议,可为高速公路收费方式和能耗研究提供一定的参考。