Effect of temperature and cyclic heating on the structure and strength of glass textolite

The article established the regularities of change of the physicomechanical characteristics and strength of glass textolites in single and repeated thermal loading. It shows that under multiple loading the intense loss of strength of the investigated materials is due to increased porosity on account of the large number of microcracks appearing in the structure. A correlation is obtained between the elastic and strength characteristics and porosity in dependence on the temperature of multiple heating which in the first approximation is described by a polynomial of second degree with respect to temperature, multiplied by the reciprocal of porosity.Translated from Problemy Prochnosti, No. 6, pp. 53–58, June, 1991.     

Converting harmonic oscillations into chaos

A new simple model of a system with chaotic dynamics, based on the equations of bistable systems, is considered. The possibility of converting harmonic signals into chaotic oscillations, which represent intermittent irregular and switching quasi-regular motions, is demonstrated by numerical methods. The mechanism of chaotization is analyzed using the results of numerical calculations.     

An in vitro model of traumatic neuronal injury: loading rate-dependent changes in acute cytosolic calcium and lactate dehydrogenase release

We developed a new in vitro model of neuronal injury using NT2-N cells to examine the effects of hydrodynamic loading rate on intraneuronal calcium dynamics and lactate dehydrogenase (LDH) release. Our apparatus consisted of a parallel disk viscometer which induced fluid shear stress with well-defined magnitudes and loading rates to cultured cells. We found that the deformation response of the cells was dependent on the severity of the insult, with increased cellular strains generated for higher shear stresses at a constant loading rate. Peak intracellular free calcium concentration correlated with strain, suggesting that mechanical deformation may regulate calcium response. Slowly applied fluid shear stress elicited no response, whereas high loading rates resulted in peak calcium increases 2.9 to 3.6 times baseline values as injury severity was increased. LDH release measured within 5 min after the insult correlated with loading rate. In addition, LDH release continued to increase out to 24 h following high loading rate conditions, demonstrating that the application of fluid shear stress led to prolonged cell damage. The acute response in NT2-N cells subjected to an insult with the CSID is dependent on the loading rate, and these results suggest that initial membrane deformation may trigger subsequent events.     

Intelligent control of the feeding of aluminum electrolytic cells using neural networks

To be efficient, the control of alumina feeding of the electrolytic cell must be based on cell resistance, alumina concentration, and cell state. Most control schemes now in use are based on cell resistance only, and, thus, constitute an open-loop control that lacks robustness because their decision criteria are not explicitly tied to concentration nor to cell state. This results in the cell operating at nonoptimal concentrations, and cell efficiency is diminished. An optimal operation requires a knowledge of concentration and an adjustment of the decision criteria as a function of concentration. A learning vector quantization (LVQ) type of neural network was built and trained to recognize the cell state. Knowing the state of the cell and its resistance, concentration can be estimated using predetermined regression functions. The decision criteria for the control logic are then consequently adapted. A closed-loop control scheme is thus obtained. Results show that, with its control so structured, the cell can operate at or near optimal concentrations independently of its state. This flexible and intelligent character of the neural control can provide a considerable advantage as compared to the standard control.     

Mechanism of displacement of electrolyte solutions from metal surface by inhibited oils

Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 5, 11–13, May, 1991.     

Composition of lithium aluminoborosilicate glass and abrasive

The properties of glasses of the lithium-aluminoborosilicate system were investigated, namely, the density, spreadability, thermal expansion, and nature of crystallized phases at various temperatures. A crystal-optical analysis was conducted. The glasses were used to prepare abrasive compositions. Their strength properties were studied as a function of the composition of the glass binder and the regime of heat treatment.Translated from Steklo i Keramika, No. 3, pp. 27–30, March, 1996.     

Test of the deterministic conjecture for the instantaneous time phase fluctuations of an oscillator

The fluctuations observed by recording the picosecond pulses of a mode-locked laser with a synchroscan streak camera are due to the laser jitter and to the variations of the zero crossing of the synchronization. By means of a simple model, it is shown that the dispersions measured when the synchronization is generated from the mode-locker oscillator reflect the instantaneous time phase fluctuations of this oscillator. From the study of the experimental recordings with methods of time series analysis it results that the phase noise of the electronic oscillator is consistent with an underlying low-dimensional strange attractor.     

A Study of the Dust Collection Process in the Production of Refractories

An experimental setup for studying filter-assisted dust collection is described. The role of various factors — hydraulic resistance, filtering velocity, dust concentration, pressure drop, efficiency of recovery — in the performance of filters intended for use in the production of refractory materials is considered. The dust removal method was tested under industrial conditions at the Semilukskii Refractory Plant and can be recommended for wider use in different branches of industry.