Experimental Thermal Performance Characterization of Flat Grooved Heat Pipes

ABSTRACT

The thermal characterization of aluminum flat grooved heat pipes is performed experimentally for different groove dimensions. Three heat pipes with groove widths of 0.2?mm, 0.4?mm, and 1.5?mm are used in the experiments. The effect of the amount of the working fluid is extensively studied for each groove width. The results reveal that, although all three succeed in dissipating the heat input through the phase change of the working fluid by continuous evaporation and condensation, the effectiveness of the heat transfer increases with reduced groove width. Furthermore, it is observed that there exists an optimum operating point, where the temperature difference between the heating and cooling sections is at a minimum, and the magnitude of this temperature difference is a strong function of the groove width. To the best of the authors’ knowledge, the combined effects of groove dimensions and the amount of the working fluid, from fully flooded to dry, is reported for the first time for aluminum flat grooved heat pipes.     

3D Hair sketching for real-time dynamic & key frame animations

Physically based simulation of human hair is a well studied and well known problem. But the “pure” physically based representation of hair (and other animation elements) is not the only concern of the animators, who want to “control” the creation and animation phases of the content. This paper describes a sketch-based tool, with which a user can both create hair models with different styling parameters and produce animations of these created hair models using physically and key frame-based techniques. The model creation and animation production tasks are all performed with direct manipulation techniques in real-time.     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

CFAR processing with switching exponential smoothers for nonhomogeneous environments

Conventional constant false alarm rate (CFAR) methods use a fixed number of cells to estimate the background variance. For homogeneous environments, it is desirable to increase the number of cells, at the cost of increased computation and memory requirements, in order to improve the estimation performance. For nonhomogeneous environments, it is desirable to use less number of cells in order to reduce the number of false alarms around the clutter edges. In this work, we present a solution with two exponential smoothers (first order IIR filters) having different time-constants to leverage the conflicting requirements of homogeneous and nonhomogeneous environments. The system is designed to use the filter having the large time-constant in homogeneous environments and to promptly switch to the filter having the small time constant once a clutter edge is encountered. The main advantages of proposed Switching IIR CFAR method are computational simplicity, small memory requirement (in comparison to windowing based methods) and its good performance in homogeneous environments (due to the large time-constant smoother) and rapid adaptation to clutter edges (due to the small time-constant smoother).     

Exploring brain connectivity with two-dimensional neural maps

We introduce two-dimensional neural maps for exploring connectivity in the brain. For this, we create standard streamtube models from diffusion-weighted brain imaging data sets along with neural paths hierarchically projected into the plane. These planar neural maps combine desirable properties of low-dimensional representations, such as visual clarity and ease of tract-of-interest selection, with the anatomical familiarity of 3D brain models and planar sectional views. We distribute this type of visualization both in a traditional stand-alone interactive application and as a novel, lightweight web-accessible system. The web interface integrates precomputed neural-path representations into a geographical digital-maps framework with associated labels, metrics, statistics, and linkouts. Anecdotal and quantitative comparisons of the present method with a recently proposed 2D point representation suggest that our representation is more intuitive and easier to use and learn. Similarly, users are faster and more accurate in selecting bundles using the 2D path representation than the 2D point representation. Finally, expert feedback on the web interface suggests that it can be useful for collaboration as well as quick exploration of data.     

An infrastructure for smart hospitals

In healthcare facilities most of the daily activities require strict coordination between clinicians, who often operate under heavy workloads and minimal workforce conditions in environments filled with increasingly complex technology. Ubiquitous Computing applications constitute a suitable solution for both reducing medical costs and improving patient safety by better supporting clinical processes. In this study we introduce an intelligent infrastructure for smart hospitals which implements basic services to optimize medical staff/patient interactions and grants ubiquitous and transparent access to clinical data stored in standard clinical databases. This infrastructure relies on the integration of Radio Frequency IDentification (RFID) and photosensor technologies to identify, locate and track clinicians and patients equipped with mobile devices and wearable RFID tags.     

Aromatic products of 340 °C supercritical-toluene extraction of two Turkish lignites: an n.m.r. study

Fractions of Elbistan and Seyitomer (Turkish) lignites, extracted with supercritical toluene at 340 °C and 8 MPa, have been separated by solvent extraction and silica-gel chromatography. Analyses by n.m.r. and i.r. spectroscopies and other methods have been combined in structural-analysis schemes to yield information about the average molecule in aromatic extracts. Carbon aromaticities, f_a, derived from 22.63 MHz ¹H-decoupled pulse Fourier-transform (PFT) ¹³C-n.m.r. are more widely spread for Elbistan (0.34–0.56) than for Seyitomer (0.40–0.43), and are lower than for supercritical-gas (SCG) products from bituminous coals. ¹³C-n.m.r. also reveals the presence of aromatic ether-O in polar fractions. Narrow aromatic signals in 100 MHz ¹H-n.m.r. spectra suggest the presence of single-aromatic-ring average structures. In the hexane-soluble aromatics, 27% (Elbistan) and 29% (Seyitomer) of the available sites are substituted by alkyI groups, some of which are at least eight carbon atoms long; the hexane-soluble polar and asphaltene/asphaltol fractions contain fewer such groups.