Maximum power density for an endoreversible carnot heat engine

An analysis using maximum power-density criteria has been carried out for an endoreversible Carnot heat engine. The results have been compared with known results on maximum power analysis. The design parameters at maximum power density lead to smaller and more efficient endoreversible Carnot heat engines than those working at maximum power output.     

Cellular neural network with trapezoidal activation function

This paper presents a cellular neural network (CNN) scheme employing a new non‐linear activation function, called trapezoidal activation function (TAF). The new CNN structure can classify linearly non‐separable data points and realize Boolean operations (including eXclusive OR) by using only a single‐layer CNN. In order to simplify the stability analysis, a feedback matrix W is defined as a function of the feedback template A and 2D equations are converted to 1D equations. The stability conditions of CNN with TAF are investigated and a sufficient condition for the existence of a unique equilibrium and global asymptotic stability is derived. By processing several examples of synthetic images, the analytically derived stability condition is also confirmed. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

An investigation of some Schiff bases as corrosion inhibitors for austenitic chromium–nickel steel in H2SO4

The corrosion inhibition of austenitic chromium–nickel steel by two Schiff bases, N-(1-toluidine)salicylaldimine and N-(2-hydroxyphenyl)salicylaldimine, was investigated in sulphuric acid medium. The effect of concentration and temperature on inhibition properties was determined. It was found that when the concentrations of inhibitor were increased the inhibition efficiencies () and surface coverage () increased. Some thermodynamic parameters such as free energy of adsorption, G _ads, and enthalpy, H, were determined for the Schiff bases. Experimental results agree with the Temkin isotherm for N-(1-toluidine)salicylaldimine, but the Langmuir isotherm is more appropriate for N-(2-hydroxyphenyl)salicylaldimine.     

Degradation of 4-chloro-2-methylphenol in aqueous solution by electro-Fenton and photoelectro-Fenton processes

Degradation of 4-chloro-2-methylphenol (PCOC), a refractory toxic chemical emitted to the environment from the industrial production of phenoxy herbicides was studied in aqueous solution. Electro-Fenton and photoelectro-Fenton processes were used as the degradation methods. H₂O₂, produced by the reduction of oxygen at carbon cathode reacted with dissolved metal ions to form hydroxyl radicals, which in turn reacted with PCOC sequentially to degrade the aromatic ring. The effects of using different [Fe²⁺]/[PCOC]₀ and the effect of replacing Fe²⁺ by Mn²⁺ ion have been examined. It was found that degradation rate was increased with increasing [Fe²⁺]/[PCOC]₀ ratio from 2 to 4. However, the total charge utilized during the treatment was also increased. The efficiency of PCOC degradation was observed to be higher when Mn²⁺ was used as the catalyst. The mineralization of aqueous solutions of PCOC, withdrawn from the reactor at certain time interval, has been followed by total organic carbon (TOC) decay and dechlorination. A fast and complete degradation of the aromatic ring was achieved in photoelectro-Fenton system. 41.7% TOC decay and complete dechlorination were observed by consuming only 141.4 C electrical charge during a 300 min photoelectron-Fenton treatment. In the case of electro-Fenton system, 280.7 C electrical charge was consumed during 450 min of electrolysis to attain a similar degradation of PCOC. 14.9% TOC removal and 89.3% dechlorination have been obtained in this system under the applied conditions.     

Antibody purification by concanavalin A affinity chromatography

Concanavalin A (Con A) immobilized poly(2‐hydroxyethyl methacrylate) (PHEMA) beads in a spherical form (100–150 μm in diameter) were used for the affinity chromatography purification of human immunoglobulin G (IgG) from aqueous solutions and human plasma. PHEMA adsorbents were prepared by suspension polymerization. Bioligand Con A was then immobilized by covalent binding onto PHEMA beads. The maximum IgG adsorption on the PHEMA/Con A beads was observed at pH 6.0. The nonspecific IgG adsorption onto the plain PHEMA adsorbents was very low (ca. 0.17 mg/g). Higher adsorption values (up to 54.3 mg/g) were obtained when the PHEMA/Con A beads were used from aqueous solutions. A higher adsorption capacity was observed for human plasma (up to 69.4 mg/g) with a purity of 82.5%. The adsorption capacities of other blood proteins were 2.0 mg/g for fibrinogen and 4.2 mg/g for albumin. The total protein adsorption was determined to be 76.0 mg/g. IgG molecules could be repeatedly adsorbed and desorbed with the PHEMA/Con A beads without noticeable loss in the IgG adsorption capacity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1202–1208, 2005     

Chemical,thermal, and mechanical properties and ultraviolet transmittance of novel nano-hydroxyapatite/polyethylene terephthalate milk bottles

Polyethylene terephthalate (PET)/nano-hydroxyapatite (nHAp) composite granules were obtained using twin-screw extruder. Preforms were prepared by injection molding and then PET/nHAp bottles were produced by blow molding. For PET bottles with nHAp, the migration amounts of carboxylic acid (COOH), acetaldehyde (AA), diethylene glycol (DEG), and isophthalic acid (IPA); glass transition temperature (T_g); melting temperature (T_m); and the maximum crystallization temperature (T_cry) were measured. The load-carrying capacity, burst strength, stress cracking, and regional material distribution tests were carried out on the bottles. X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and ultraviolet transmittance analyses were conducted to explain the changes in mechanical, chemical, physical properties, and light transmission of bottles. It was found out that the COOH amount increased and the AA content decreased with increasing nHAp amount. On the other hand, no change was observed in the amounts of DEG and IPA. Although the mechanical properties such as load-carrying capacity and burst strength of the bottles have improved, it has been determined that the standard environmental stress crack resistance test procedure cannot be applied to such a composite. Experimental findings indicate that nHAp disrupts the chemical structure of PET and it isolates harmful chemicals such as AA by forming intermolecular bonds. Moreover, with the addition of up to 0.8% nHAp, PET bottles block the light transmission approximately 80% within 400–700 nm wave length zone. The study demonstrates that the PET/nHAp composite bottles can be used in the food industry, particularly in the packaging of milk and milk products which are vulnerable to light exposure.     

Fair referee assignments for professional football leagues

Assignment of referees to football games is an important problem faced in professional football leagues. Despite its importance, the problem has received limited academic attention. This paper presents a model and analysis of the problem for fair referee assignments, and develops a constructive heuristic and a local search procedure for its solution. Results from an extensive computational study show that the methods are effective in solving the problem in a second of computation time and yielding an excellent solution quality.