贵港航运枢纽工程通过交工验收

广西西江航运建设二期贵港航运枢纽工程交工验收会于2001年1月10日至12日在贵港举行。 　　本次验收工作由区交通厅主持，参加单位有工程指挥部、监理部、设计单位、施工单位及运行单位。在验收会上，各方代表对广西电力院的设计工作给予了很高的评价。区交通厅质量监督站对本工程的质量等级核定为优良。经过一年多试运行考验，所有设备运行指标均达到设计要求。1999年2月1日至2000年11月30日发电量已达9.16亿kW*h，创电费收入2.437亿元，开始发挥巨大的工程效益。 　　 (撰稿　刘益祥)     

苯乙烯与1-(2-叔丁基过氧异丙基)-3-异丙烯基苯共聚行为研究

苯乙烯与1－（2－叔丁基过氧异丙基）－3－异丙烯基苯（D120）能进行自由基共聚合反应，聚合后过氧基团以侧基的形成被保留在共聚物大分子链上，凝胶色谱分析发现，随原料单体中D120比例增加，共聚物的分子量减小，分子量分布变窄，DSC分析发现共聚物中过氧基团的分解温度随D120结构单元含量的增加而下降，但仍高于D120单体过氧基团的分解温度，苯乙烯与D120的竞聚率为：rD120=0.700,rSt=0.714。     

THERMAL DEBINDING OF A NEW BINDER

ＴＨＥＲＭＡＬＤＥＢＩＮＤＩＮＧＯＦＡＮＥＷＢＩＮＤＥＲ①ＺｈｏｕＪｉｃｈｅｎｇ，ＨｕａｎｇＢａｉｙｕｎ，ＷｕＥｎｘｉ，ＹｕＬｉｇｏｎｇ，ＱｕＸｕａｎｈｕｉＮａｔｉｏｎａｌＫｅｙＬａｂｏｒａｔｏｒｙｆｏｒＰｏｗｄｅｒＭｅｔａｌｕｒｇｙ，Ｃｅｎｔｒａ...     

Effect of a direct magnetic field on the interfacial microstructure between molten aluminium and solid iron

Many processing techniques, such as hot dip aluminizing, bimetal formation, liquid metal corrosion, cementing, welding and diffusion bonding, are basically dependent on interfacial reactions [1-3]. It is therefore important to investigate the formation and growth of intermetallic layers at the interface. There have been several studies carried out to examine chemical compositions and growth kinetics of intermetallic layers in the Al-Fe system [4-9]. Most authors have come to an agreement that…     

Advances in the research of nitrogen containing stainless steels

The current status of nitrogen containing stainless steels at home and aboard has been introduced. The function and existing forms of nitrogen in the stainless steels, influence of nitrogen on mechanical properties and anti-corrosion properties as well as the application of nitrogen containing cast stainless steels were discussed in this paper. It is clear that nitrogen will be a potential and important alloying element in stainless steels. And Argon Oxygen Decarbonization (AOD) refining can provide an advanced manufacture process for nitrogen containing stainless steels with ultra-low- carbon and high cleanliness.     

EFFECT OF COMPOSITION ON PHYSICAL PROPERTIES OF AMORPHOUS Fe-Si-B ALLOYS

ＥＦＦＥＣＴＯＦＣＯＭＰＯＳＩＴＩＯＮＯＮＰＨＹＳＩＣＡＬＰＲＯＰＥＲＴＩＥＳＯＦＡＭＯＲＰＨＯＵＳＦｅＳｉＢＡＬＬＯＹＳ①ＷａｎｇＬｉｎｇｌｉｎｇ，ＺｈａｏＬｉｈｕａ，ＨｕＷａｎｇｙｕ，ＷｕＬｉｊｕｎ，ＺｈａｎｇＢａｎｇｗｅｉＤｅｐａｒｔｍｅ...     

Discussion on compact mechanism of air-stream and synchro-formed clamp plate impact molding

1 .Introduction Due to many advantages such as simple molding machine structure high compact compaction of sand mold, speed and well-distributed the air-stream impact molding method However, has been extensively used in production.when this molding method is applied to mold complicated pattern with wider top surface and deep     

低银无镉Ag-Cu-Zn钎料的合金化改性

介绍了低银无镉Ag-Cu-Zn系钎料的成分特点和研发思路,采用Sn、P元素对含银21 mass%的Ag-Cu-Zn系钎料进行合金化,讨论了Sn、P元素含量对钎料熔化温度及显微组织的影响。结果表明,随Sn含量增加,钎料的熔化温度可持续下降,同时晶内及晶界相的Sn固溶量增大,钎料趋于硬脆。微量P的添加能显著降低银钎料的熔点,(Sn+P)低水平复合添加可在满足熔化特性的同时,避免由于过量Sn固溶导致的加工成型困难,有利于钎料的实用生产。     

HIPS/HDPE共混物的动态黏弹行为与相形态

采用动态流变测试和扫描电子显微镜技术,考察高抗冲聚苯乙烯(HIPS)/高密度聚乙烯(HDPE)共混物的动态黏弹行为与相形态,对比1%(质量分数,下同)的纳米和微米CaCO_3对HIPS/HDPE(30/70)不相容共混物的增容效果。结果表明:当HDPE小于30%时,HIPS/HDPE共混物在低频区的复数黏度和储存模量均显示出明显的正偏差,而当HDPE大于30%时,则呈现负偏差;前者与HDPE和PB粒子间的相互作用相关,而后者归因于HDPE基体与PS分散相之间较弱的界面相互作用。当HIPS为基体时,HDPE分散相粒子呈现较宽的尺寸分布;而当HDPE为基体时,PS分散相呈现双模尺寸分布,对应于两种不同类型的PS分散相粒子的存在。1%的纳米CaCO_3对HIPS/HDPE(30/70)不相容共混体系起到了一定的增容效果,CaCO_3纳米粒子主要位于HIPS/HDPE相界面以及HDPE连续相内;而微米CaCO_3对该共混体系仅起到了增黏而非增容作用,CaCO_3微米粒子仅位于HDPE连续相内。     

八氯甲基笼型倍半硅氧烷的合成及表征

以氯甲基三氯硅烷为原料,甲醇、氯仿和石油醚为混合溶剂,在浓盐酸和无水三氯化铁为催化剂的条件下水解缩合制备了八氯甲基笼型倍半硅氧烷(CM-POSS)。利用FT-IR、GPC、1 H-NMR、29Si-NMR和XRD等技术对产物的结构进行了表征,并通过TGA研究了其热稳定性。结果表明产物为八氯甲基笼型倍半硅氧烷,且热稳定性良好。