排序方式: 共有36条查询结果,搜索用时 15 毫秒
1.
2.
张银珠 叶志镇 吕建国 何海平 顾修全 赵炳辉 Zhang Yinzhu Ye Zhizhen Lü Jianguo He Haiping Gu Xiuquan Zhao Binghui 《半导体学报》2007,28(Z1):322-325
采用脉冲激光沉积技术制备了Li-N双受主共掺杂p型ZnO薄膜,其中Li来自Li掺杂ZnO陶瓷靶,N来自N2O生长气氛.室温Hall测试发现Li-N共掺p型ZnO薄膜的最低电阻率为3.99Ω·cm,迁移率为0.17cm2/(V·s),空穴浓度为9.12×1018cm-3.PL谱测试发现了与Li受主和N受主态相关的发光峰,其受主能级分别约为120和222meV.由p-ZnO:(Li,N)薄膜制备的ZnO同质p-n结具有整流特性. 相似文献
3.
4.
5.
Ag3POa/AgC1 hybrids have been synthesized via a facile ion-exchange method. The hybrids exhibit an enhanced photocatalytie activity for degradation of rhodamine B (RhB) than the single Ag-3PO_4 or AgCl under a visible light irradiation. Such a behavior might be attributed to the increased number of high active sites and suitable energy band structure. The possible mechanism is also discussed. 相似文献
6.
以导电玻璃为阴极,在不同pH下,从含有0.083mol/LCu(CH3COO)2·H2O、0.22mol/L乳酸的电解液中电沉积合成Cu2O薄膜。研究了电解液pH对Cu2O薄膜晶体择优取向和形貌的影响。结果表明,通过调节电解液pH可合成不同择优取向和形貌的Cu2O薄膜,在pH为7~13内合成的Cu2O薄膜均具有较好的光吸收性。pH=11时,可制得具有(111)取向、结合力强、光催化活性高和稳定性好的Cu2O薄膜。Cu2O薄膜的晶面类型对薄膜催化能力有较大影响,(111)择优取向的Cu2O薄膜的光催化活性最高,反应2.5h后罗丹明B的降解率可达63%。 相似文献
7.
Improved performance of perovskite solar cells through using (FA)x(MA)1-xPbI3 optical absorber layer
In this work, the perovskite solar cells (PSCs) were fabricated with the bandgap-tunable (FA)x(MA)1-xPbI3 absorber layers through a facile two-stage deposition route. The doping was realized by adding the formamidinium iodide (FAI) into a precursor MAI solution. Both the surface morphology and electrochemical impedance spectra (EIS) were conducted to evaluate the absorber layers or solar cells. After the optimization, the best PSC performance of 14.73% was achieved at a nominal FAI content of 12.5 at.%. The performance enhancement was attributed to both the enhancement of visible light harvesting and carrier transport capability. Besides, the stability of a PSC device based on the single MAPbI3 absorber layer was also investigated, and a power conversion efficiency (PCE) of 11.27 % remained even after laying in vacuum for 10 days. 相似文献
8.
首先通过水热法在透明导电基底上合成出垂直有序的ZnO纳米线阵列,再对这些ZnO纳米线进行表面处理以得到TiO2纳米管阵列。随后,这些纳米线(管)阵列被用作光阳极组装染料敏化太阳电池(DSSC),以探索它们的光电化学性能。通过研究发现,用TiO2纳米管阵列组装而成的DSSC具有0.81%的太阳能转换效率,高出ZnO纳米线阵列组装而成的DSSC 3倍以上。另外,还运用一个简单的二极管模型对这些DSSC的伏安特性(J-V)曲线进行分析。最终发现,造成DSSC性能大幅度提高的原因在于其内部并联电阻的增加以及泄漏电流的下降。 相似文献
9.
10.
TiO2 nanorod arrays (NRAs) were synthesized directly on the fluorine tin oxide (FTO) coated glass substrates by a facile hydrothermal route. The effects of growth time on the photoelectrochemical (PEC) properties of TiO2 NRAs are investigated. The samples synthesized for 4 h exhibit a photocurrent intensity of 0.37 mA/cm2 at the irradiation of Xe lamp and a bias of 0 V. As the growth time increases, the thickness and order degree of the NRAs are enhanced, but the photocurrent is reduced a lot. It might be associated with the hindering of a high background electron density in NRs due to the long-time hydrothermal reaction in acid environment. Moreover, the decline behavior is observed, which is attributed to the poor charge separation capacity of TiO2 array electrodes and could be suppressed efficiently by applying a suitable positive bias. 相似文献