Electrolytic cell engineering and device optimization for electrosynthesis of e-biofuels via co-valorisation of bio-feedstocks and captured CO2

Utilizing CO₂ in an electro-chemical process and synthesizing value-added chemicals are amongst the few viable and scalable pathways in carbon capture and utilization technologies.CO₂ electro-reduction is also counted as one of the main options entailing less fossil fuel consumption and as a future electrical energy storage strategy.The current study aims at developing a new electrochemical platform to produce low-carbon e-biofuel through multifunctional electrosynthesis and integrated co-valorisation of biomass feedstocks with captured CO₂.In this approach,CO₂ is reduced at the cathode to produce drop-in fuels(e.g.,methanol)while value-added chemicals(e.g.,selective oxidation of alcohols,aldehydes,carboxylic acids and amines/amides)are produced at the anode.In this work,a numerical model of a continuous-flow design considering various anodic and cathodic reactions was built to determine the most techno-economically feasible configurations from the aspects of energy efficiency,environment impact and economical values.The reactor design was then optimized via parametric analysis.     

二氧六环在CA低压反渗透膜中的作用机理

在低压醋酸纤维素一丙酮－甲酰胺反渗船舶这膜铸膜液体体系中，加入二氧六环使膜具有较小的初始平均孔径和较窄的孔径分布，二氧六环起到了调节高分子网络尺寸变小和均一化的作用。在１．０ＭＰａ下进料液浓度为１０００ｍｇ／Ｌ时，膜对Ｎａ２ＳＯ４、ＭＧＳＯ４分离率〉９６％，对ＮａＣｌ为８０％，Ｃ（ＮＯ２）２为８０％，ＭｇＣｌ２为７９％。平均透水率〉１．２５ｍｌ／ｃｍ＾２．ｈ适用于中低盐度水的脱盐软化。     

Analysis of an electricity-cooling cogeneration system for waste heat recovery of gaseous fuel engines

Waste heat recovery(WHR)is one of the most useful ways to improve the efficiency of internal combustion engines,and an electricity-cooling cogeneration system(ECCS)based on Rankin-absorption refrigeration combined cycle for the WHR of gaseous fuel engines is proposed in the paper.This system can avoid wasting the heat in condenser so that the efficiency of the whole WHR system improves,but the condensing temperature of Rankin cycle(RC)must increase in order to use absorption refrigeration system,which leads to the decrease of RC output power.Therefore,the relationship between the profit of absorption refrigeration system and the loss of RC in this combined system is the mainly studied content in the paper.Because the energy quality of cooling and electricity are different,cooling power in absorption refrigeration is converted to corresponding electrical power consumed by electric cooling system,which is defined as equivalent electrical power.With this method,the effects of some important operation parameters on the performance of the ECCS are researched,and the equivalent efficiency,exergy efficiency and primary energy rate are compared in the paper.     

Weak signal detection and adaptive synchronous stability of a novel fifth-order memristive circuit system

This paper is devoted to introduce a novel complex fifth-order memristive circuit system and its applications in synchronous stability and weak signal detection. Firstly, the typical dynamical behaviors of the memristive system are discussed by chaotic phase portrait, complexity analysis, one-parameter bifurcation and Lyapunov exponent spectrum. Secondly, the adaptive control method is applied to realize the synchronization between the drive memristive system (DMS) and the response memristive system (RMS). The results indicate that the synchronization method has strong robustness and anti-interference ability. Thirdly, the weak signal detection of the novel five-dimensional memristive system is realized by using the extreme sensitivity of chaotic system to initial values. Finally, the fifth-order memristive circuit is designed by using basic electronic elements and simulated by Multisim software. And the anti-interference ability and sensitivity of the fifth-order memristive circuit are further verified by adding different weak disturbance signals at different positions of the circuit.     

Si-Al-Y Co-deposition Coatings Prepared on Ti-Al Alloy for Enhanced High Temperature Oxidation Resistance

Si-Al-Y co-deposition coatings were prepared on Ti-Al alloy by pack cementation processes at 1 050 ℃ for 4 h with different halide activators in the packs for enhancing the high temperature oxidation resistance of Ti-Al alloy. The structure, constituent phases, formation process and oxidation behavior of the coatings were investigated. The experimental results showed that the coatings prepared respectively with NaF and NH_4Cl as activators were composed of a(Ti, X)_5Si_4,(Ti, X)_5Si_3(X represents Nb and Cr), and TiSi_2 outer layer, a TiAl_2 inner layer and an Al-rich interdiffusion zone. However, the constituent phases changed into TiSi_2 in the outer layer and(Ti, X)_5Si_4 and(Ti, X)_5Si_3 phases were observed in the middle layer of the coating prepared with AlCl_3·6H_2O activator. Among the halide activators studied, the coating prepared with AlCl_3·6H_2O was thicker and denser, which is the only suitable activator for pack Si-Al-Y co-deposition coatings on a Ti-Al alloy. The oxidation results show that the coating can protect the Ti-Al alloy from oxidation at 1000 ℃ in air for at least 80 h. The excellent oxidation resistance of the coating is attributed to the formation of a dense scale mainly consisted of TiO_2, SiO_2 and Al_2O_3.     

Topology optimization of transient problem with maximum dynamic response constraint using SOAR scheme

Frontiers of Mechanical Engineering - This paper proposes a novel method for the continuum topology optimization of transient vibration problem with maximum dynamic response constraint. An...     

Promoting Xylene Production in Benzene Methylation using Hierarchically Porous ZSM-5 Derived from a Modified Dry-gel Route

Methylation of benzene is an alternative low-cost route to produce xylenes, but selectivity to xylene remains low over conventional zeolitic catalysts. In this work, a combined dry-gel-conversion and s...     

Distributions of polycyclic aromatic hydrocarbons in surface waters, sediments and soils of Hangzhou City, China

Ten polycyclic aromatic hydrocarbons (PAHs) were simultaneously measured in 17 surface water samples and 11 sediments of four water bodies, and 3 soils near the water-body bank in Hangzhou, China in December 2002. It was observed that the sum of PAHs concentrations ranged from 0.989 to 9.663 microg/L in surface waters, from 132.7 to 7343 ng/g dry weight in sediments, and from 59.71 to 615.8 ng/g dry weight in soils. The composition pattern of PAHs by ring size in water, sediment and soil were surveyed. Three-ring PAHs were dominated in surface waters and soils, meanwhile sediments were mostly dominated by four-ring PAHs. Furthermore, PAHs apparent distribution coefficients (K(d)) and solid f(oc)-normalized K(d) (e.g. K(oc)= K(d) / f(oc)) were calculated. The relationship between logK(oc) and logK(ow) of PAHs for field data on sediments and predicted values were compared. The sources of PAHs in different water bodies were evaluated by comparison of K (oc) values in sediments of the river downstream with that in soils. Hangzhou section of the Great Canal was heavily polluted by PAHs released from industrial wastewater in the past and now PAHs in sediment may serve as sources of PAHs in surface water. PAHs in Qiantang River were contributed from soil runoff. Municipal road runoff was mostly contributed to West Lake PAHs.