Unsaturated polyesters. II. Structure and properties of polyester resins based on cinnamylsuccinic acid

Unsaturated Polyester resins were prepared by the reaction of cinnamylsuccinic acid with saturated diols, namely, ethylene, diethylene, propylene, dipropylene, tetramethylene, and hexamethylene glycols, and the unsaturated diols, namely, 1,4-butene- and 1,4-butynediols. All the polyester resins obtained have been characterized and were found to cure with styrene, with relatively low conversions. The properties of the cured polyesters in the form of films were determined. IR and ¹H-NMR spectroscopy were used for both qualitative and quantitative analyses of the polyesters and their hydrolyzate products, after curing with styrene.     

Modeling of multilevel converters

In this paper, the imbricated cells multilevel converters are studied and modeled from a control viewpoint. These converters make use of several switches connected in a series, which allows using switches with reduced voltage ratings; these low voltage switches have lower conduction losses and can switch at higher frequency. In addition to this feature common to all converters using series connected switches, the control signals of multilevel converters can be phase shifted to increase the apparent switching frequency and improve the dynamic performances of the whole converter. It is shown that a multilevel inverter leg, composed of p pairs of switches and p-1 capacitors, forms a multivariable nonlinear system that cannot be properly modeled by standard methods such as state-space averaging. The transient behavior of this system depends on the current harmonics and their phase shift with the different control signals. A specific model is detailed, studied, and used to illustrate the properties of these converters. In particular, the natural balancing of the voltage across the switches is demonstrated and the time constants involved in this process are determined     

Organotin polymers. IV. Binary and ternary copolymerizations of tributyltin acrylate and methacrylate with styrene,allyl methacrylate,butyl methacrylate,butyl acrylate,and acrylonitrile

The monomer reactivity ratios for the copolymerization of tributyltin acrylate with styrene and allyl methacrylate have been found to be r₁ = 0.213, r₂ = 1.910 and r₁ = 0.195, r₂ = 2.257, respectively. Also, the copolymerization parameters of tributyltin methacrylate with styrene and allyl methacrylate were as follows: r₁ = 0.256, r₂ = 1.104 and r₁ = 2.306, r₂ = 1.013. Copolymerization reactions were carried out in solution at 70°C using 1 mole % AIBN, and the copolymer compositions were determined by tin analysis. Ternary copolymerization of the three systems butyl methacrylate–tributyltin methacrylate–acrylonitrile, butyl acrylate–tributyltin methacrylate–acrylonitrile, and styrene–tributyltin acrylate–acrylonitrile have been studied, and the terpolymer composition of each system was determined through tin and nitrogen analyses. The variation of instantaneous and average terpolymer composition with conversion fit satisfactorily the experimental results over a wide range of conversion.     

Effect of Molybdenum on the Structure and on the Crystallization of SiO2–Na2O–CaO–B2O3 Glasses

Crystallization of the poorly durable Na₂MoO₄ phase able to incorporate radioactive cesium must be avoided in SiO₂–Al₂O₃–B₂O₃–Na₂O–CaO glasses developed for the immobilization of Mo-rich nuclear wastes. Increasing amounts of B₂O₃ and MoO₃ were added to a SiO₂–Na₂O–CaO glass, and crystallization tendency was studied. Na₂MoO₄ crystallization tendency decreased with the increase of B₂O₃ concentration whereas the tendency of CaMoO₄ to crystallize increased due to preferential charge compensation of BO₄⁻ entities by Na⁺ ions. ²⁹Si MAS NMR showed that molybdenum acts as a reticulating agent in glass structure. Trivalent actinides surrogate (Nd³⁺) were shown to enter into CaMoO₄ crystals formed in glasses.     

Effect of diffusional mass transfer on the performance of horizontal subsurface flow constructed wetlands in tropical climate conditions

The effect of mass transfer on the removal rate constants of BOD5, NH3, NO3 and TKN has been investigated in a Horizontal Subsurface Flow Constructed Wetland (HSSFCW) planted with Phragmites mauritianus. The plug flow model was assumed and the inlet and outlet concentrations were used to determine the observed removal rate constants. Mass transfer effects were studied by assessing the influence of interstitial velocity on pollutant removal rates in CW cells of different widths. The flow velocities varied between 3-46 m/d. Results indicate that the observed removal rate constants are highly influenced by the flow velocity. Correlation of dimensionless groups namely Reynolds Number (Re), Sherwood Number (Sh) and Schmidt Number (Sc) were applied and log-log plots of rate constants against velocity yielded straight lines with values beta = 0.87 for BOD5, 1.88 for NH3, 1.20 for NO3 and 0.94 for TKN. The correlation matched the expected for packed beds although the constant beta was higher than expected for low Reynolds numbers. These results indicate that the design values of rate constants used to size wetlands are influenced by flow velocity. This paper suggests the incorporation of mass transfer into CW design procedures in order to improve the performance of CW systems and reduce land requirements.     

Characterization of Ge–Bi–S glass by thermal, electrical, switching and optical measurements

A study of the synthesized Ge22.5Bi7S70.5 glassy system has been carried out. Differential thermal analysis data indicate the retention in the as-quenched sample of two amorphous phases. Thermal conductivity, , measurements on bulk sample reveal that the main contribution to is due to phonon thermal conductivity. Thermal evaporation of the synthesized ingot gives films with Ge20.7Bi6.8S72.5 as composition. The values of the activation energy and the pre-exponential factor calculated from the direct current electrical conductivity above 53 °C suggest that carrier conduction occurred between extended states in these films. The I–V characteristics in the off-state and the switching phenomenon are investigated. A memory switch with a threshold voltage decreasing with temperature is detected for the studied films. Optical parameters such as absorption coefficient, optical gap and refractive index are also determined. Comparison with binary Ge–S glass reveals that the addition of Bi introduces additional absorbing states at band edges. © 1998 Kluwer Academic Publishers     

Electrical and spectrophotometric properties of charge transfer complexes of picric acid and some aniline derivatives

The charge transfer complexes produced by the reaction between picric acid and some aniline derivatives were prepared. The prepared charge transfer complexes (CTC) were investigated using infrared and nuclear magnetic resonance spectroscopy aiming to throw more light on their molecular structure. It was proved that a proton transfer interaction takes place between PiOH and x-Ph.NH₂ leading to the formation of PiO^} and x-Ph.NH₃ ⁺ ions. The normal -¹ electronic interaction takes place by transferring an electron from the aniline ring to the picric acid. The semiconducting properties of the CTC were investigated. All the prepared complexes were proved to have a semiconducting character within the temperature range investigated.     

Seismic Retrofit of State Street Bridge on Interstate 80

The State Street Bridge, in Salt Lake City, was designed and built in 1965 according to the 1961 AASHO specifications; the design did not include earthquake-induced forces or displacements since only wind loads were considered. The bridge consists of four reinforced concrete (RC) bents supporting composite welded steel girders; the bents are supported on cast-in-place concrete piles and pile caps. A vulnerability analysis of the bridge was conducted that determined deficiencies in (1) confinement of column lap splice regions, (2) anchorage of longitudinal column bars in the bent cap, (3) confinement of column plastic hinge zones, and (4) shear capacity of columns and bent cap–column joints. Seismic retrofit designs using carbon-fiber-reinforced-polymer (CFRP) composites and steel jackets were performed and compared for three design spectra, including the 10% probability of exceedance in 250 years earthquake. The CFRP composite design was selected for implementation and application of the composite was carried out in the summer of 2000 and 2001, while the bridge was in service. The paper describes the CFRP composite design, which, in addition to column jackets, implemented an “ankle wrap” for improving joint shear strength and a “U-strap” for improving anchorage of column bars in the bent cap; other retrofit measures were implemented, such as bumper brackets and a deck slab retrofit. A capacity versus demand evaluation of the as-built and retrofitted bents is presented.     

Joint physical and link layer error control analysis for nanonetworks in the Terahertz band

Nanonetworks consist of nano-sized communicating devices which are able to perform simple tasks at the nanoscale. The limited capabilities of individual nanomachines and the Terahertz (THz) band channel behavior lead to error-prone wireless links. In this paper, a cross-layer analysis of error-control strategies for nanonetworks in the THz band is presented. A mathematical framework is developed and used to analyze the tradeoffs between Bit Error Rate, Packet Error Rate, energy consumption and latency, for five different error-control strategies, namely, Automatic Repeat reQuest (ARQ), Forward Error Correction (FEC), two types of Error Prevention Codes (EPC) and a hybrid EPC. The cross-layer effects between the physical and the link layers as well as the impact of the nanomachine capabilities in both layers are taken into account. At the physical layer, nanomachines are considered to communicate by following a time-spread on-off keying modulation based on the transmission of femtosecond-long pulses. At the link layer, nanomachines are considered to access the channel in an uncoordinated fashion, by leveraging the possibility to interleave pulse-based transmissions from different nodes. Throughout the analysis, accurate path loss, noise and multi-user interference models, validated by means of electromagnetic simulation, are utilized. In addition, the energy consumption and latency introduced by a hardware implementation of each error control technique, as well as, the additional constraints imposed by the use of energy-harvesting mechanisms to power the nanomachines, are taken into account. The results show that, despite their simplicity, EPCs outperform traditional ARQ and FEC schemes, in terms of error correcting capabilities, which results in further energy savings and reduced latency.