Ballistic behavior of plain and reinforced concrete slabs under high velocity impact

This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete slabs. In this paper, we focus on the comparison of the performance of the plain and reinforced concrete slabs of unconfined compressive strength 41 MPa under ballistic impact. The concrete slab has dimensions of 675 mm × 675 mm × 200 mm, and is meshed with 8-node hexahedron solid elements in the impact and outer zones. The ogive-nosed projectile is considered as rigid element that has a mass of 0.386 kg and a length of 152 mm. The applied velocities vary between 540 and 731 m/s. 6 mm of steel reinforcement bars were used in the reinforced concrete slabs. The constitutive material modeling of the concrete and steel reinforcement bars was performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. The analysis was conducted using the commercial finite element package Abaqus/Explicit. Damage diameters and residual velocities obtained by the numerical model were compared with the experimental results and effect of steel reinforcement and projectile diameter were studies. The validation showed good agreement between the numerical and experimental results. The added steel reinforcements to the concrete samples were found efficient in terms of ballistic resistance comparing to the plain concrete sample.     

Parametric study on smoothed particle hydrodynamics for accurate determination of drag coefficient for a circular cylinder

Simulations of two-dimensional (2D) flow past a circular cylinder with the smoothed particle hydrodynamics (SPH) method were conducted in order to accurately determine the drag coefficient. The fluid was modeled as a viscous liquid with weak compressibility. Boundary conditions, such as a no-slip solid wall, inflow and outflow, and periodic boundaries, were employed to resemble the physical problem. A sensitivity analysis, which has been rarely addressed in previous studies, was conducted on several SPH parameters. Hence, the effects of distinct parameters, such as the kernel choices and the domain dimensions, were investigated with the goal of obtaining highly accurate results. A range of Reynolds numbers (1–500) was simulated, and the results were compared with existing experimental data. It was observed that the domain dimensions and the resolution of SPH particles, in comparison to the obstacle size, affected the obtained drag coefficient significantly. Other parameters, such as the background pressure, influenced the transient condition, but did not influence the steady state at which the drag coefficient was determined.     

An Abstract Reachability Approach by Combining HOL Induction and Multiway Decision Graphs

In this paper, we provide a necessary infrastructure to define an abstract state exploration in the HOL theorem prover. Our infrastructure is based on a deep embedding of the Multiway Decision Graphs (MDGs) theory in HOL. MDGs generalize Reduced Ordered Binary Decision Diagrams (ROBDDs) to represent and manipulate a subset of first-order logic formulae. The MDGs embedding is based on the logical formulation of an MDG as Directed Formulae (DF). Then, the MDGs operations are defined and the correctness pro...     

Controller synthesis with guaranteed closed-loop phase constraints

In this paper, we present an analysis and synthesis approach for guaranteeing that the phase of a single-input, single-output closed-loop transfer function is contained in the interval [−α,α] for a given α>0 at all frequencies. Specifically, we first derive a sufficient condition involving a frequency domain inequality for guaranteeing a given phase constraint. Next, we use the Kalman–Yakubovich–Popov theorem to derive an equivalent time domain condition. In the case where , we show that frequency and time domain sufficient conditions specialize to the positivity theorem. Furthermore, using linear matrix inequalities, we develop a controller synthesis approach for guaranteeing a phase constraint on the closed-loop transfer function. Finally, we extend this synthesis approach to address mixed gain and phase constraints on the closed-loop transfer function.     

Feature Selection for Detecting ICMPv6-Based DDoS Attacks Using Binary Flower Pollination Algorithm

Internet Protocol version 6 (IPv6) is the latest version of IP that goal to host 3.4 × 10³⁸ unique IP addresses of devices in the network. IPv6 has introduced new features like Neighbour Discovery Protocol (NDP) and Address Auto-configuration Scheme. IPv6 needed several protocols like the Address Auto-configuration Scheme and Internet Control Message Protocol (ICMPv6). IPv6 is vulnerable to numerous attacks like Denial of Service (DoS) and Distributed Denial of Service (DDoS) which is one of the most dangerous attacks executed through ICMPv6 messages that impose security and financial implications. Therefore, an Intrusion Detection System (IDS) is a monitoring system of the security of a network that detects suspicious activities and deals with a massive amount of data comprised of repetitive and inappropriate features which affect the detection rate. A feature selection (FS) technique helps to reduce the computation time and complexity by selecting the optimum subset of features. This paper proposes a method for detecting DDoS flooding attacks (FA) based on ICMPv6 messages using a Binary Flower Pollination Algorithm (BFPA-FA). The proposed method (BFPA-FA) employs FS technology with a support vector machine (SVM) to identify the most relevant, influential features. Moreover, The ICMPv6-DDoS dataset was used to demonstrate the effectiveness of the proposed method through different attack scenarios. The results show that the proposed method BFPA-FA achieved the best accuracy rate (97.96%) for the ICMPv6 DDoS detection with a reduced number of features (9) to half the total (19) features. The proven proposed method BFPA-FA is effective in the ICMPv6 DDoS attacks via IDS.     

Rheological characteristics of modified calcium grease with graphene nanosheets

The effect of graphene nanosheets (GNS) on the rheological characteristics and thermal conductivity of calcium grease used in marine applications, and water pumps for lower demanding applications, has been experimentally evaluated in this paper. Various volume fractions of GNS (0.5, 1, 2, 3, and 4% wt.) have been immersed in the grease aiming at finding the better percentages that improve the properties of nanogrease. The rheological characteristics and thermal conductivity were evaluated with a Brookfield Rheometer DV-III ULTRA and KD2 thermal analyzer, respectively. The results of the modified calcium grease indicated that the best concentration of GNS is 3% wt. The rheological characteristics of the grease with a different volume fraction of GNS indicated a non-Newtonian behavior. Thermal conductivity of nanogreas also increases with an increase of GNS volume fraction. Moreover, the apparent viscosity, shear stress and dropping point increase by 59%, 52%, and 65%, respectively, with increasing GNS volume fraction.     

He’s homotopy perturbation method: A strongly promising method for solving non-linear systems of the mixed Volterra–Fredholm integral equations

In this paper, He’s homotopy perturbation method is applied to solve non-linear systems of mixed Volterra–Fredholm integral equations. Two examples are presented to illustrate the ability of the method. Also comparisons are made between the Adomian decomposition method and the homotopy perturbation method. The results reveal that He’s homotopy perturbation method is very effective and simple and in these examples leads to the exact solutions.     

Generation of sodium hypochlorite (NaOCl) from sodium chloride solution using C/PbO_2 and Pb/PbO_2 electrodes

Two modified electrodes (Pb/PbO2 and C/PbO2) were prepared by electrodepositing a lead oxide layer on lead and carbon sub-strates. These modified electrodes were used as anodes for the generation of sodium hypochlorite (NaOCl) from sodium chloride solution. Different operating conditions and factors affecting the treatment process of NaOCl generation, including current density, pH values, con-ductive electrolytes, and electrolysis time, were studied and optimized. By comparison the C/PbO2 electrode shows a higher efficiency than the Pb/PbO2 electrode for the generation of NaOCl.     

Implicit algorithm for finite deformation hypoelastic–viscoplasticity in fcc metals

An implicit objective stress update algorithm is proposed for a hypoelastic–viscoplastic model. A thermal/dynamic yield function, which is derived based on the thermal activation analysis and dislocation interaction mechanisms, is used, along with the Consistency approach and the framework of additive viscoplasticity, in deriving the proposed model for fcc metals. The corotational formulation approach is utilized in developing the proposed model in the finite deformation field. For the case of the Newton–Raphson iteration method, a new expression for the consistent (algorithmic) tangent stiffness matrix of rate‐dependent metals is derived by direct linearization of the stress update algorithm. Finite element simulations are performed by implementing the proposed viscoplasticity constitutive models in the commercial finite element program ABAQUS. Numerical implementation for a simple tensile problem is used for validating the material parameters of the OFHC Copper under low and high strain rates and temperatures. The numerical results of the adiabatic true stress–true strain curves compare very well with the experimental data. The effectiveness of the present approach is tested by studying strain localization in a simple plane strain problem. Results indicate excellent performance of the present framework in describing the strain localization problem and in obtaining mesh‐independent results. Copyright © 2006 John Wiley & Sons, Ltd.     

Quantitative and reliable in vitro method combining scanning electron microscopy and image analysis for the screening of osteotropic modulators

The increased generation and up-regulated activity of bone resorbing cells (osteoclasts) play a part in the impairment of bone remodeling in many bone diseases. Numerous drugs (bisphosphonates, calcitonin, selective estrogen receptor modulators) have been proposed to inhibit this increased osteoclastic activity. In this report, we describe a pit resorption assay quantified by scanning electron microscopy coupled with image analysis. Total rabbit bone cells with large numbers of osteoclasts were cultured on dentin slices. The whole surface of the dentin slice was scanned and both the number of resorption pits and the total resorbed surface area were measured. Resorption pits appeared at 48 h and increased gradually up to 96 h. Despite the observation of a strong correlation between the total resorption area and the number of pits, we suggest that area measurement is the most relevant marker for osteoclastic activity. Osteotropic factors stimulating or inhibiting osteoclastic activity were used to test the variations in resorption activity as measured with our method. This reproducible and sensitive quantitative method is a valuable tool for screening for osteoclastic inhibitors and, more generally, for investigating bone modulators.