Compensating the effects of DC bias lines on terahertz photomixer antennas using resistively loaded lines

This paper proposed a method, namely resistively loaded lines (RLL), to compensate the effects of the DC bias lines after investigating its effects on several types of antennas for terahertz photomixers. The RLL is formed by placing lumped resistances periodically on the DC bias line in order to cease the leakage current virtually, which cause a significant amount of distortion on the antenna performance. The simulation results of the dipole, folded dipole, log-periodic, and spiral antennas show that RLL almost removes the effects of the bias lines and improves the antenna radiation resistance and radiation pattern notably compared with that of the commonly used bias line types, such as coplanar stripline and photonic bandgap type bias lines.     

Hierarchically Structured Magnetic Nanoconstructs with Enhanced Relaxivity and Cooperative Tumor Accumulation

Iron oxide nanoparticles are formidable multifunctional systems capable of contrast enhancement in magnetic resonance imaging, guidance under remote fields, heat generation, and biodegradation. Yet, this potential is underutilized in that each function manifests at different nanoparticle sizes. Here, sub‐micrometer discoidal magnetic nanoconstructs are realized by confining 5 nm ultra‐small super‐paramagnetic iron oxide nanoparticles (USPIOs) within two different mesoporous structures, made out of silicon and polymers. These nanoconstructs exhibit transversal relaxivities up to ≈10 times (r ₂ ≈ 835 mm ^?1 s^?1) higher than conventional USPIOs and, under external magnetic fields, collectively cooperate to amplify tumor accumulation. The boost in r ₂ relaxivity arises from the formation of mesoscopic USPIO clusters within the porous matrix, inducing a local reduction in water molecule mobility as demonstrated via molecular dynamics simulations. The cooperative accumulation under static magnetic field derives from the large amount of iron that can be loaded per nanoconstuct (up to ≈65 fg) and the consequential generation of significant inter‐particle magnetic dipole interactions. In tumor bearing mice, the silicon‐based nanoconstructs provide MRI contrast enhancement at much smaller doses of iron (≈0.5 mg of Fe kg^?1 animal) as compared to current practice.     

A new method for adaptive IIR filter design based on tabu search algorithm

Adaptive digital filters have proven their worth in a wide range of applications such as channel equalisation, noise reduction, echo cancelling, and system identification. These filters can be broadly classified into two groups: finite impulse–response (FIR) and infinite impulse–response (IIR) filters. IIR filters have become the target of increasing interest because these filters can reduce the filter order significantly as compared to FIR filters. Tabu search is a heuristic optimisation algorithm which has been originally developed for combinatorial optimisation problems. It simulates the general rules of intelligent problem solving and has the ability of discovering the global minima in a multi-modal search space. In this work, a novel method based on tabu search is described for the design of adaptive IIR filters.     

Facile growth of novel morphology correlated Ag/Co-doped ZnO nanowire/flake-like composites for superior photoelectrochemical water splitting activity

In this paper, novel morphology correlation between silver nanowires (AgNWs) and cobalt (Co)-doped ZnO (Co-ZnO) flake-like thin films (nanowire/flake-like) has been proposed for enhanced photoelectrochemical (PEC) water splitting activity. Here in, high-quality AgNWs/Co-ZnO heterostructures enabled superior visible light water splitting activity compared to the pure ZnO and AgNWs/ZnO. To address the strategic effect of AgNWs coupling and transition metal (Co-2?at%) doping into the ZnO host lattice, we have carried out the X-ray diffraction, field emission scanning microscopy, X-ray photoelectron spectroscopy, UV–Vis transmittance, water contact angle and PEC analyses. In this way, PEC water splitting activity was mainly examined by linear sweep voltammetry (I-V), amperometric I-t and photoconversion efficiency (η) studies. The experimental results provide clear evidence of morphology correlation between AgNWs and Co-ZnO flake-like structures for strong visible light absorption. Specifically, AgNWs/Co-ZnO composites exhibited significant enhancement in the photocurrent density (7.0?×?10^?4 A/cm²) than AgNWs/ZnO (3.2?×?10^?4 A/cm²) and pure ZnO (1.5?×?10^?6 A/cm²). As a result, detailed AgNWs/Co-ZnO geometry has great potential for photoconversion efficiency (0.73%). In a word, the merits of controllable AgNWs/Co-ZnO heterostructure are proposed to improve the visible light harvesting and charge carrier generation for energy conversion devices.     

Effect of bentonite addition on fabrication of reticulated porous SiC ceramics for liquid metal infiltration

SiC with different particles and a clay mineral bentonite (montmorillonite) were mixed in water to prepare ceramic slurry. The slurry was then infiltrated high porous polyurethane sponge. Excess slurry was squeezed out to adjust ceramic rate in the infiltrated body. The pore walls were coated with ceramic mix after the infiltrated body was dried. The polyurethane containing SiC particles and bentonite was fired in a box furnace to burn out the polyurethane from the body at 500 °C for 30 min. The remaining porous ceramic bodies were sintered at elevated temperatures to give strength. SiC particles with bentonite surface coating took polyurethane pore forms after firing the sponge. Bentonite was both used as binder for ceramic slurry at room temperatures and the sintering additives at elevated temperatures. Therefore, increasing bentonite addition gives higher strength to the resulting ceramic performs.     

Fabrication of Si3N4 preforms from Si3N4 produced via CRN technique

Ceramic preforms with randomly distributed particles as reticulated porous structure which are generally used for metal infiltration as reinforcement, membranes, catalyst supports etc. Preforms are characterized by open porosity making possible their infiltration by liquid metal alloys. In this work, quartz powders using carbon black as a reducing agent were used for alpha Si₃N₄ powders synthesis through a carbothermal reduction and nitridation (CRN) process. The CRN process was carried out under nitrogen flow at 1,450 °C for 4 h. At high temperatures, carbon as reducing agent reacts with the oxygen of SiO₂, and the resulting metallic silicon compounds with nitrogen gas to obtain silicon nitride powder. The reacted powders were used to obtain reticulated ceramic by replica method. The powders containing various bentonite ratios were mixed in water to prepare slurry. The slurry was infiltrated into a polyurethane sponge. A high porous ceramic foam (preform) structure was achieved after burn out of the sponge. All ceramic preforms were sintered to increase stiffness (in the temperature range 900–1,350 °C). The sintered ceramic foams were subjected to compressive tests. The scanning electron microscopy was used to examine the reticulated ceramic foam structure, and X-ray diffraction analysis was performed to determine phases.     

Effects of various phytase sources on phytic acid content,mineral extractability and protein digestibility of tarhana

Changes in phytic acid (PA), HCl-extractability (HCl-E) of some minerals and in vitro protein digestibility (IVPD) during the production of tarhana prepared with the addition of different phytase sources (bakers’ yeast, barley malt flour and microbial phytase) were investigated. PA content of tarhana decreased significantly (p < 0.01) after addition of the yeast, malt and phytase. With respect to wheat flour used as raw material, PA content of tarhana decreased by 95.3%. After tarhana production, average values of HCl-E of Ca, Mg, Zn and K, and also IVPD of tarhana increased up to 80.2%, 86.4%, 73.9% and 92.6%, and 91.9%, respectively. Significant negative correlation coefficients were found between the PA and HCl-E of the minerals, and also IVPD. Tarhana production processes, including fermentation, drying and grinding, were able to remove the antinutritional effects of PA. Each one of the phytase sources used alone decreased the PA content to a limited extend. The results show that tarhana has good potential in the total amounts and bioavailability of the minerals and proteins.     

Dyeing of Wool and Cotton with Extract of the Nettle (Urtica dioica L.) Leaves

The aim of the study is to investigate the optimum dyeing conditions for wool and cotton fabrics with the nettle (Urtica dioica L.) extract. For this purpose, the leaves of the nettle were extracted with distilled water by using Soxhlet apparatus. Wool and cotton fabrics were pretreated with artificial animal urine system (AAUS) including NH₃ (3%, v/v), CaC₂O₄ (3%, m/v), and urea (3%, m/v) before dyeing processes in order to improve the fastness properties of the dyed samples. The best dyeing conditions were evaluated in terms of color strength. The results reveal that the nettle leaves shall probably be an important raw material especially for dyeing of wool fibers.     

Dyeing,fastness, and cytotoxic properties,and phenolic constituents of Anthemis tinctoria var. tinctoria (Asteraceae)

The present study focused on dyeing, fastness, cytotoxic properties, and phenolic constituents of various types of fabrics including viscose, cotton, wool, and polyester-viscose blended fabrics with different parts of Anthemis tinctoria var. tinctoria. Comparative study was carried out between ethanol and aqueous extracts of stem, flower, and root of the plant in terms of phenolic constituents, cytotoxic activity, and dyeing properties. It was found that the quantity of phenolic constituents of ethanol and aqueous extracts was quite different. All parts of the plant extract show 0% cytotoxicity except ethanol extract of the root. All the extracts exhibit better cytotoxic activity than the standard cancer drug 5-Florouracil. Ethanol and water extracts of A. tinctoria var. tinctoria plant were used to dye fabrics, but only the water extract displayed dyeing properties. Best color strength value (K/S = 9.19) was obtained with aqueous extract of the stem in the presence of alum mordant for cotton fabrics.