The formulation of powder coatings using solid state shear extrusion

The feasibility of producing homogeneous powder coating formulations without melting is investigated using Solid State Shear Extrusion (SSSE). A detailed comparison between conventional melt extrusion and SSSE processing conditions of identical formulations is accomplished by following the behavior and degree of polymerization during curing. Commercially available polyester and epoxide powder coating premix formulations were processed by SSSE using a Brabender® laboratory‐scale twin‐screw extruder and further pulverized in a ball mill. Calculations based on particle size before and after comminution in single batch ball mill studies indicate a reduction in energy requirements for SSSE during pulverization. Metal coupons were coated with dry pulverized formulations using an electrostatic fluidized bed coating system. The dynamics of curing were followed for a series of bake time exposures. The sol was separated from the gel using Soxhlet methods and characterized by gel permeation chromatography (GPC). A comparison of experimentally determined gel points and gelation dynamics showed general agreement between both processing methods. The critical yield stress, determined from preliminary mechanical testing of modified thick adherend specimens crack‐line‐loaded in compression, was also determined. Results showed the SSSE process to be equivalent to melt extrusion.     

Inclusion counting of steel residues as means of assessing the hot working performance of steel

A new technique, Coulter Counter Particle Size Analysis, has been applied to the study of oxide inclusions in seamless ingots and their effect on defect occurrence in the finished product. The volume of oxide inclusions in representative small steel samples is a measure of hot working quality within ingots and between seamless heats. Furthermore, oxide inclusion distribution by size is a log-normal function indicating that most large and small inclusions have a similar morphology. A series of calculations were made on the number of hot working defects to be expected from the oxide inclusion population of the subject steels. Close agreement between the number of calculated defects and observed defects was obtained.     

The influence of age on isometric endurance and fatigue is muscle dependent: a study of shoulder abduction and torso extension

The present study examined differences in isometric muscle capacity between older (55-65 years) and younger (18 - 25 years) individuals. A total of 24 younger and 24 older participants (gender balanced within each group) performed sustained shoulder abductions and torso extensions to exhaustion at 30%, 50% and 70% of individual maximal voluntary contraction (MVC). Along with endurance time, manifestations of localized fatigue were determined based on changes in surface electromyographic signals obtained from the shoulder (middle deltoid) and the torso (multifidus and longissimus thoracis) muscles. Strength recovery was monitored using post-fatigue MVCs over a 15-min period. Compared to the younger group, older individuals exhibited lower muscular strength, longer endurance time and slower development of local fatigue. Age effects on fatigue were typically moderated by effort level, while effects of gender appeared to be marginal. Non-linear relationships between target joint torque and endurance time were observed, with effects of age differing between shoulder abduction and torso extension. Overall, the effects of age on endurance and fatigue were more substantial and more consistent for the shoulder muscle than for the torso muscles and were likely related to differences in muscle fibre type composition. For strength recovery rates, no significant age or gender effects were found in either experiment. In summary, this study suggests that differences in isometric work capacity do exist between older and younger individuals, but that this effect is influenced by effort level and the muscle tested.     

Influence of surface modification of alumina on bond strength in Al2O3/Al/Al2O3 joints

The subject of the work was to study the effect of Ti thin film on alumina ceramic on mechanical strength and fracture character of Al₂O₃/Al/Al₂O₃ joints. The joints were formed by liquid state bonding of alumina substrates covered with titanium thin film of 800 nm thickness using Al interlayer of 30μm thickness at temperature of 973 K in a vacuum of 0.2 mPa for 5 min. The bend strength was measured by four–point bending test at room temperature. Scanning and transmission electron microscopy were applied for detailed characterization of interface structure and failure character of fractured joint surfaces. Result analysis has shown that application of the Ti thin film on alumina leads to decrease of bond strength properties of Al₂O₃/Al/Al₂O₃ joints along with the change either of structure and chemistry of interface or of failure character.     

Catalytic Sulfation of Betulin with Sulfamic Acid: Experiment and DFT Calculation

Betulin is an important triterpenoid substance isolated from birch bark, which, together with its sulfates, exhibits important bioactive properties. We report on a newly developed method of betulin sulfation with sulfamic acid in pyridine in the presence of an Amberlyst^®15 solid acid catalyst. It has been shown that this catalyst remains stable when being repeatedly (up to four cycles) used and ensures obtaining of sulfated betulin with a sulfur content of ~10%. The introduction of the sulfate group into the betulin molecule has been proven by Fourier-transform infrared, ultraviolet-visible, and nuclear magnetic resonance spectroscopy. The Fourier-transform infrared (FTIR) spectra contain absorption bands at 1249 and 835–841 cm⁻¹; in the UV spectra, the peak intensity decreases; and, in the nuclear magnetic resonance (NMR) spectra, of betulin disulfate, carbons С3 and С28 are completely shifted to the weak-field region (to 88.21 and 67.32 ppm, respectively) with respect to betulin. Using the potentiometric titration method, the product of acidity constants K₁ and K₂ of a solution of the betulin disulfate H⁺ form has been found to be 3.86 × 10^–6 ± 0.004. It has been demonstrated by the thermal analysis that betulin and the betulin disulfate sodium salt are stable at temperatures of up to 240 and 220 °C, respectively. The density functional theory method has been used to obtain data on the most stable conformations, molecular electrostatic potential, frontier molecular orbitals, and mulliken atomic charges of betulin and betulin disulfate and to calculate the spectral characteristics of initial and sulfated betulin, which agree well with the experimental data.     

Curcumin and Weight Loss: Does It Work?

Obesity is a global health problem needing urgent research. Synthetic anti-obesity drugs show side effects and variable effectiveness. Thus, there is a tendency to use natural compounds for the management of obesity. There is a considerable body of knowledge, supported by rigorous experimental data, that natural polyphenols, including curcumin, can be an effective and safer alternative for managing obesity. Curcumin is a is an important compound present in Curcuma longa L. rhizome. It is a lipophilic molecule that rapidly permeates cell membrane. Curcumin has been used as a pharmacological traditional medicinal agent in Ayurvedic medicine for ∼6000 years. This plant metabolite doubtless effectiveness has been reported through increasingly detailed in vitro, in vivo and clinical trials. Regarding its biological effects, multiple health-promoting, disease-preventing and even treatment attributes have been remarkably highlighted. This review documents the status of research on anti-obesity mechanisms and evaluates the effectiveness of curcumin for management of obesity. It summarizes different mechanisms of anti-obesity action, associated with the enzymes, energy expenditure, adipocyte differentiation, lipid metabolism, gut microbiota and anti-inflammatory potential of curcumin. However, there is still a need for systematic and targeted clinical studies before curcumin can be used as the mainstream therapy for managing obesity.     

Cyclin-Dependent Kinase Synthetic Lethality Partners in DNA Damage Response

Cyclin-dependent kinases (CDKs) are pivotal mediators and effectors of the DNA damage response (DDR) that regulate both the pathway components and proteins involved in repair processes. Synthetic lethality (SL) describes a situation in which two genes are linked in such a way that the lack of functioning of just one maintains cell viability, while depletion of both triggers cell death. Synthetic lethal interactions involving CDKs are now emerging, and this can be used to selectively target tumor cells with DNA repair defects. In this review, SL interactions of CDKs with protooncogene products MYC, poly (ADP-ribose) polymerase (PARP-1), and cellular tumor antigen p53 (TP53) are discussed. The individual roles of each of the SL partners in DDR are described.     

Performance study of water desalination methods in Saudi Arabia

Saudi Arabia is an arid desert country without rivers or sweet water lakes, however, it does have vast amount of groundwater and seawater. In order to make these waters suitable for human consumption and industrial use, most of their salts must be removed by some means. The desalination methods most frequently used in the Kingdom are: Multistage flash (MSF) evaporation, reverse osmosis (RO), and electrodialysis (ED).During the last decade, we have witnessed a spectacular growth of desalination plants. This growth is expected to continue in the next decade. The present production capacity of all desalting plants in Saudi Arabia is estimated to be 750,000 m³/day; this figure will be most likely tripled in the next five years.This paper is a report on a performance study of the most significant desalination plants in the Kingdom. The plants, which include MSF and seawater and brackish water RO plants, were selected either because of their size or their importance to the desalination technology. The plants are briefly described and their performances are discussed.     

THE INFLUENCE OF N-ALKANES ON WETTABILITY DF LOW COAL RANKS

Contact angle measurements were carried out in coal / n-alkanes film - air bubble - water systems. Then theoretical an analysis of the equilibrium state of that system was carried out on the basis of the components of the surface free energy of coal of various ranks. The contact angles were measured for four ranks of Polish coal which surfaces were covered with n-alkanes film in the homological series from n-hexane to n-hexadecane. On the basis of the studies and calculations carried out we have concluded that the values of the contact angle depend on the rank of coal, a thickness of n-alkane film and its structure and the presence of water film under the air bubble. It was also found that the changes of the- values of the contact angles measured in the mentioned sytems as a function of the number of contacted air bubbles were similar to those calculated on the basis of the solution of Young equation in function of the surface free energy of coals precovered with n-alkane film.     

The Combination of Intestinal Alkaline Phosphatase Treatment with Moderate Physical Activity Alleviates the Severity of Experimental Colitis in Obese Mice via Modulation of Gut Microbiota,Attenuation of Proinflammatory Cytokines,Oxidative Stress Biomarkers and DNA Oxidative Damage in Colonic Mucosa

Inflammatory bowel diseases (IBD) are commonly considered as Crohn’s disease and ulcerative colitis, but the possibility that the alterations in gut microbiota and oxidative stress may affect the course of experimental colitis in obese physically exercising mice treated with the intestinal alkaline phosphatase (IAP) has been little elucidated. Mice fed a high-fat-diet (HFD) or normal diet (ND) for 14 weeks were randomly assigned to exercise on spinning wheels (SW) for 7 weeks and treated with IAP followed by intrarectal administration of TNBS. The disease activity index (DAI), grip muscle strength test, oxidative stress biomarkers (MDA, SOD, GSH), DNA damage (8-OHdG), the plasma levels of cytokines IL-2, IL-6, IL-10, IL-12p70, IL-17a, TNF-α, MCP-1 and leptin were assessed, and the stool composition of the intestinal microbiota was determined by next generation sequencing (NGS). The TNBS-induced colitis was worsened in obese sedentary mice as manifested by severe colonic damage, an increase in DAI, oxidative stress biomarkers, DNA damage and decreased muscle strength. The longer running distance and weight loss was observed in mice given IAP or subjected to IAP + SW compared to sedentary ones. Less heterogeneous microbial composition was noticed in sedentary obese colitis mice and this effect disappeared in IAP + SW mice. Absence of Alistipes, lower proportion of Turicibacter, Proteobacteria and Faecalibacterium, an increase in Firmicutes and Clostridium, a decrease in oxidative stress biomarkers, 8-OHdG content and proinflammatory cytokines were observed in IAP + SW mice. IAP supplementation in combination with moderate physical activity attenuates the severity of murine colitis complicated by obesity through a mechanism involving the downregulation of the intestinal cytokine/chemokine network and oxidative stress, the modulation of the gut microbiota and an improvement of muscle strength.